Choosing Glass Rite for Window Replacements in Santa Fe PowerPoint PPT Presentation

presentation player overlay
About This Presentation
Transcript and Presenter's Notes

Title: Choosing Glass Rite for Window Replacements in Santa Fe


1
Choosing Glass Rite for Window Replacements in
Santa Fe
2
After windows are replaced or installed by the
new windows at home our job is not done but we
have to maintain them in a proper
conditions. Although Glass-Rites replacement
windows are close to being maintenance free, they
may become dirty as any other item exposed to
atmospheric and household conditions. Window
upkeep includes keeping replacement windows clean
dust free not only to maintain their appearance
but also to keep them functioning properly.
3
Maintenance of Replacement Windows Check the
exterior caulking of your replacement at least
once annually. If necessary, re-caulk area where
needed. Pay particular attention to the tops and
bottoms of the windows or anywhere that water is
likely to accumulate. Glass Rite recommends using
a high quality silicone caulking.
4
Normal Replacement Window Maintenance If you
have a replacement window inside the shower area,
be sure and use a curtain to keep water from
hitting the window it may cause insulated glass
to fail prematurely. Replacement windows are
designed to get wet on the outside not on the
inside.
5
  • Glass Window Maintenance
  • Windex or a similar glass cleaner or vinegar
    diluted in 8 parts water is recommended to clean
    glass.
  • Avoid using sprinklers or garden hoses around
    windows. Local water contains a high mineral
    content and can leave spots on the glass which
    are very difficult to remove.
  • Avoid excess humidity keep home well ventilated
    to prevent window condensation on interior of
    glass.
  • Do not use any acid based glass cleaners!

6
Removing and Installing Screens The screens for
Glass-Rite replacement windows can be removed
either from the inside of the house or the
outside, and the screens them selves are
inter-changeable. To put the screen back in your
replacement window, start by sliding the side of
the screen with the tension springs towards the
center of the window. Compress the tension
springs by pressing the screen frame opposite the
pull tabs and use the pull tabs to get the corner
of the screen into the window, repeat for the
other corner.
7
Contact Us Glass-Rite 808 Gibson SE Albuquerque,
NM 87102 Phone 505-764-9899 Toll-free
1-800-824-1005 Please Visit Us
http//www.glass-rite.com/
Write a Comment
User Comments (0)
About PowerShow.com