Car Dent Removal Techniques that Work

1
Car Dent Removal Techniques that Work

• PDR-One - Paintless Dent Repair

2
As solid and concrete as one might think they
are, all cars are vulnerable to dents and dings.
The need to remove dents from your prized vehicle
can be a necessity, whether it is the result of a
tight parking space or something you dont even
know about. Here are some tips that can be useful
to remove dents with household objects.
Household Plunger The removal of basic car dents
can be done with the help of a regular plunger
with the right technique. The method is easier to
complete when there are large dents without any
holes or creases. There are also occasions when
the strength of the seal around the plungers
mouth can be improved by applying some petroleum
jelly. By the firm attachment of the mouth of the
plunger to the body work and ensuring that it is
centrally and securely placed, grip the handle
and give it a sharp tug. This will make the metal
pop back to its original place. This is not a
technique that gives the best results but it is
convenient and can be done easily.
3
Car Dent Plunger There is a wide range of
plungers and pullers available at car part stores
that are specially designed for car dent removal.
These devices usually look like the smaller
version of the standard household plungers. The
plunger allows you to remover air from the head
after it is in place in order to create an air
tight seal. This is a paintless dent removal
method that does not require any further work
after you rectify the dent.
4
Dent Puller A dent puller can also be bought from
any car supply store or hardware store. The dent
puller will require you to drill a hole in the
center of the dent before using the device to
pull the bodywork back into its original place.
The hole has to be drilled carefully so that you
do not push the dent further inside. Another
thing you have to avoid is drilling the hole
larger than it needs to be. The wire component of
the tool is to be positioned within the hole and
secured tightly to make sure the dent pops out
when you pull it. The problem with this method is
that when the dent has been fixed, the hole needs
to be repaired using a filler and paint.
5
Mallet In the cases where you the access to the
back of the body part that has suffered the dent,
a rubber mallet can be used for the car dent
removal. If the dents are in a large area, like
the hood of the car, you may carefully use the
mallet on the reverse side to bring the bodywork
back into its place. In order to prevent the
metal from being hammered too far out during the
repair, make sure you conduct this process
gradually and carefully.
Hammer A standard metal work hammer can also be
used as a technique for car dent removal. This
method is particularly effective for small and
uneven dents. The hammer is used on the reverse
side of the body part that has suffered the dent
in order to force the metal back to where it is
supposed to be. To get the best results make sure
the hammer head is rounded and covered by cloth
or it may cause some unwanted damage.
6
PDR-ONE is providing Paintless Dent Repair
Services With Guaranteed and Satisfying
Results. Address 5889 Kachina Drive Riverside,
CA 92509 Phone [phone] Website
http//www.pdr-one.com
Presentation Made By