AutoCAD Architecture - PowerPoint PPT Presentation

View by Category
About This Presentation
Title:

AutoCAD Architecture

Description:

AutoCAD is a computer-aided drawing application used for creating blue-prints for buildings, Create a bridges and computer chips. CAD is mainly used by draftsman, although engineer, surveyors and architecture, may need to use the software application. – PowerPoint PPT presentation

Number of Views:555

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: AutoCAD Architecture


1
AutoCAD Architecture
  • ADMEC Multimedia Institute
  • C-7/114, 2nd Floor, Sector-7, Rohini,
    Delhi110085
  • Mob. 91-8377861642, 9999492155
  • Email ID info_at_admecindia.co.in website
    www.admecindia.co.in

Presented By ADMEC Multimedia Institute
Created by Mukesh Gupta
2
What is AutoCAD ?
  • AutoCAD (Automatic computer aided design) is a
    mercantile application for 2D plan and 3D
    modeling drawing available since 1982, as a
    desktop application and since 2010 available as a
    mobile web and cloud based apps.
  • AutoCAD Developed by Auto-desk, CAD was first
    released in since December 1982, running on
    computers with internal graphics Comptroller.
    Former to the introduction of AutoCAD, most
    instdurial CAD programs ran on main computers or
    minicomputer, with each CAD manipulator working
    at a isolated graphic terminals.
  • AutoCAD is a computer-aided drawing application
    used for creating blue-prints for buildings,
    Create a bridges and computer chips. CAD is
    mainly used by draftsman, although engineer,
    surveyors and architecture, may need to use the
    software application.

3
Types of Drafters?
  • Three types of drafters
  • Mechanical drafter Mechanical engineers ,which
    create a plan of our project,and he is prepare a
    plan of his device.

4
  • Architectural Drafters
  • Architectural drafters draw a plan of our
    residence and industrial building. Civil engineer
    draw a plans for make bridge and road design and
    building of sewer method and other major projects.

5
  • Electrical Drafters
  • Electrical engineer work up electricity to
    prepare drawing of wiring electrical device
    demonstration.Electrical engineer also create a
    wiring plan for making, installing and repairing
    of electronic gadgets. Electrical engineer deep
    study and application for electricity.

6
(No Transcript)
7
Who is AutoCAD Designer?
  • CAD designer are professional who make a 2D plan
    and 3D modeling. Another designers as civil,
    machanical, architecture he make a building
    design.Sourly, CAD designers work an engineer,
    architect and interior designers to design a home
    design, electric or room designs. Most important,
    they help to create plans that can be used by an-
    other architecture professional.

8
Where is AutoCAD Used?
  • Auto-CAD is used athwart a broad range of
    industries, by as architectures, project
    managers, civil engineers, graphic designers, and
    other professionals and electrical engineer which
    make a good plan for our projects.
  • Auto-CAD is engineer prepare a good plan and use
    it.
  • Cad desingner prepare a building,bridge and
    roadways , flyover and another things .

9
CO-ORDINATE SYSTEM
  • Every thing that be draw in autocad is exact All
    object drawn on screen is based on simple
  • (x-y) co-ordinate system
  • It is know as WCS(world co-ordinate system) in
    auto-CAD.
  • Now we are draw a line,so we have take two points
    as- A(-10,-4) and B(9,6).

10
Comparison between 2D and 3D?
  • 2D is a single view.but 3D is a six view and four
    isometric view. it is explain under of page. 2D
    is two dimensions "level", use the horizontal and
    vertical (X and Y) dimensions, but 3d is the
    three dimensions (X and Y and Z),
  • It is show in 3d six view .
  • Top view and Bottom view, Left view and Right
    view, Front view and Back view
  • And 4 Isometric view-
  • South-East AND North-East AND North-West ,
    South-West

11
About Autocad Commands?
  • Basics Units.
  • Viewing Draw order, draw order annotation.
  • Geometry Circle,hatch,line,pline,rectangle.
  • Precision Distance,osnap.
  • Layer Layer.
  • Properties Match properties,line type.

12
  • Modifying Trim, Stretch, Rotate, Pedit, Offset,
    Move, Mirror, Fillet, Extend, Explode, Erase,
    Copy, Align, Champher.
  • Block Insert, Block.
  • Layouts Mview.
  • Notes and labels Style, Mtext, Multileader
    Style, Multileader.
  • Dimensions
  • Dimaligned, Dimangular, Dimcontinue, Dimdiameter,
    Dimradius, Dimstyle.

13
(No Transcript)
14
Be a AutoCad Architecture
  • - Contact Us -
  • ADMEC MULTIMEDIA INSTITUTE
  • Leader in Animation Digital Media Education
  • ISO 9001 2008 CERTIFIED
  • - Visit Our Websites -
  • www.admecindia.co.in
  • www.cadtraininginstitute.com
  • Phones 91-9811-8181-22, 91-9911-7823-50

15
AutoCAD Screen
16
Out Line...
  • The presentation gives you a brief on the
    following topics and how to use them on auto-cad
    software.
  • Way to provide command
  • Drawing 3d shapes
  • Object snap
  • UCS(User coordinate system
  • Editing
  • Zooming and panning
  • Drawing 2d shapes
  • Assignment

17
How do We Issue a Command?
  • Command Line
  • Toolbars
  • Drop down menus
  • Ribbon

18
What is Osnap ?
  • Osnap (object osnap) setting make it easier to
    select a 2D objects points-
  • End point
  • Midpoint
  • Perpendicular
  • Centre
  • scission
  • Osnap will be active when
  • autocad is expect you to
  • pick a point on the operative area (F3)
    is on.
  • Type (osnap) on your command
  • window OR press F3 key.

19
Zooming ?
  • You want to zoom in side and out side you type z
    in autoCad window.
  • This doesnt change your ucs, only the route you
    see your
  • Work space. This can be done in many way.
  • Scroll bars
  • Type ''Z'' or Zoom in your command prompt-
  • All
  • Centre
  • Dynamic
  • Extents
  • Previous
  • Scale
  • Window

20
Let's Draw A Line ?
  • Give the Command
  • Short command (LEnter) to open line
  • Type ''L'' on the command prompt
  • Click on the line icon on the draw panel in the
    toolbar
  • Select line on the Ribbon

21
  • Specify the first point
  • Click on a random point on your working area
    (block space)
  • Specify the second point in relation to the
    first point
  • _at_ Distance degrees
  • _at_ 5lt30

22
  • CIRCLE COMMAND
  • Type C in the command prompt then press Enter
  • Circle is depend on two access
  • Centre (Diameter)
  • Radius

23
  • ELLIPSE COMMAND
  • Ellipse is also depend on two access
  • Major
  • Miner
  • Type EL in command prompt then press Enter.

24
  • POINT COMMAND
  • Point is also depend on two access-
  • Divide
  • Measure

25
What is Polygon ?
  • Specify the number of edge and length of a side-
  • First enter the number of sides number and
    second specify centre of polygon.
  • Polygon is depend on two access
  • Inscribed (polygon is Inscribed in circle)
  • Circumscribed (polygon is out of circle)
  • You can use the explode command for
  • the tool to split the object into its
  • components or lines.

26
What is Editing ?
  • Copy command
  • A copy object made to similar to an object.

27
  • Move Command
  • Move command that moves one or more files or
    directories from one place to another.

28
What is Else ?
RECTANGLE Type Rec in the command prompt then
Enter Rectangle two diagonal lines (pick first
point and select the second one with relation to
the first point).
29
  • Mirror Command
  • A mirrored copy of an object is called mirror.

30
  • Array Command
  • Array command create a circular pattern of object.

31
  • Stretch Command
  • The Stretch command is used to adjust the
    rectangle(width and length).

32
More Editing...
  • Offset command
  • The Offset
  • command creates parallel copies of an object
    (default value) away from the original object.

33
  • Rotate Command
  • The Rotate command is used to rotate an object of
    angle.

34
  • Explode Command
  • The Explode command allows the compound object
    to change into the poly line object.

35
  • Erase Command
  • Erase command (delete command) that command used
    to selected object erase.

36
What is Polyline ?
  • The Pline command create a chain line with
    multiple vertexes and straight or circular.
  • Segments between the vertexes.
  • Draw a close shape with the pline command.
  • Then type Pedit (Polyline edit) on the command
    line and see what you can do with its.

37
What is Hatching ?
  • Hatch command is used to add shaded patterns to
    objects and shapes in autoCAD drawing.
  • Hatch patterns can be used to signal a articles
    to be used. such as a solid hatch.
  • In the alternative it could be used to make an
    area of a draw stand out.
  • You pick the object-
  • Pattern
  • Scale
  • Angle
  • Points

38
3D Commands ?
  • Now we can prepare a solid objects by extrud
    command as-
  • If you extrude a surface to get into the third
    dimension you just add a thickness in block. It
    is basically is same as creating a solid
    objects.

39
  • Vscurent
  • It is used for setting of view style of diagram,
    which may be.....
  • 2D Wire frame
  • Realistic
  • 3D Hidden

40
SWEEP COMMAND
  • Creates a solid or surface by sweeping on open or
    closed planar OR
  • Creates a 3d solid or surface by revolve an
    object around an axis non-planar curve(profile)
    along on open or closed path. Open curves create
    surfaces and closed curves create solid or
    surfaces.

41
3D MODELING...
  • Solids contain the property of 3d object.
  • You can use the solids toolbar for readily
    accessible objects-
  • Box
  • Wedge
  • Con
  • Cylinder
  • Torus
  • Sphere

42
  • You can use the boolean orations of more
    complicated shapes
  • Union (Join two Solids).
  • Subtract (Carve out the second solids from the
    first).
  • Intersection (Only the common area).

43
What is Difference between UCS and WCS
  • The Auto-cad world is three dimensional. However,
    if we want to draw a 2D object. Such as a plan or
    a selection, we will use only 2dimension (x and
    y) .
  • WCS (World Coordinate System) is the dreamy plan
    that is proportionate to the ground. It is the
    default coordinate system.
  • Modification made to the WCS (world coordinate
    system) result in a UCS (user coordinate
    system). It enables the user
  • to draw 3 dimensional objects.

44
  • - Contact Us -
  • ADMEC MULTIMEDIA INSTITUTE
  • Leader in Animation Digital Media Education
  • ISO 9001 2008 CERTIFIED
  • - Visit Our Websites -
  • www.admecindia.co.in
  • www.cadtraininginstitute.com
  • Phones 91-9811-8181-22, 91-9911-7823-50

45
(No Transcript)
About PowerShow.com