Learn Steps To Make Fingerprint Jewellery

1
Learn Steps To Make Fingerprint Jewellery
2

• Condition a small ball of polymer clay by working
  it in your hand to warm it up so the clay is more
  pliable.

3

• Lay a sheet of wax paper on the table and set the
  conditioned clay on it. Use a wood dowel as a
  rolling pin to roll out the clay to an even
  1/8-inch thickness for a pendant.

4

• Press a finger into the clay and move it gently
  from side to side to create a good fingerprint
  impression.

5

• Lay the fingerprint pendant on a piece of baker's
  parchment paper. Allow to harden for a couple of
  hours.

6

• Put on a filter mask and open a jar of real metal
  powder.

7
Place Here
baker's parchment

• Place the piece of baker's parchment with the
  pendent resting on it in a toaster oven or
  regular oven.

8

• Allow the fingerprint pendant to cool. Glaze the
  pendant by brushing or dipping to seal the
  metallic powder to the polymer clay.

9

• Thread a metal jump ring through the small hole
  at the top of the pendant.

10
If You Are Find great deals of Fingerprint
Jewellery, visit Pastelprint.co.uk