Description for Plasma Cutting Machine - PowerPoint PPT Presentation

View by Category
About This Presentation
Title:

Description for Plasma Cutting Machine

Description:

Optimized outline of ferrite center transformer with superb CRGO (Cold Rolled Grain Oriented) covers to guarantee low power utilization at 100% obligation cycle – PowerPoint PPT presentation

Number of Views:209
Slides: 5
Provided by: arshtech
Category: Other

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: Description for Plasma Cutting Machine


1
Description for Plasma Cutting Machine
2
  • Plasma Cutting Machine comprise of Power source
    with controls, Water Re-coursing framework if
    obliged and an overall planned Torch. The
    fundamental guideline is that the arc shaped
    between the electrodes and the work piece is
    choked by a fine bore, copper spout. This builds
    the temperature and speed of the plasma
    discharging from the spout. The temperature of
    the plasma is in abundance of 20,000c and the
    speed can approach the pace of sound. At the
    point when utilized for cutting, the plasma gas
    stream is expanded so that the profoundly
    infiltrating plasma plane slices through the
    material and liquid material is evacuated in the
    efflux plasma. 

3
  • Look at our fabricated Plasma Cutting Machines
    advantages, determinations, applications and
    extent of supply
  • Important Features
  • Profits of Low Power Consumption Optimized
    outline of ferrite center transformer with superb
    CRGO (Cold Rolled Grain Oriented) covers to
    guarantee low power utilization at 100
    obligation cycle
  • Strong Power Factor Power element redress
    capacitor guarantees Power Factor of 0.85 - 0.90
    guaranteeing most minimal force utilization
  • Steps free Power Control Power controlled in
    steps in high limit machines for developed force
    sparing
  • Simple Arc Striking High open circuit voltage
    to suit simple arc striking
  • Security against Voltage Fluctuation Overload
    Fully secured force source against voltage
    vacillation over-burden included with complete
    wellbeing interlocking for light assurance
    against air and water disappointment
  • Simple to Operate Easy to work and keep up
    light set out toward administrator's comfort
  • High Cutting Capacity Highly enhanced light
    outline offers higher cutting limit at low power
    yield

4
  • Long Life of Consumables Torch outline ensures
    long life of consumables viz. anode and spout 
  •  
  • Dross Free Cuts Almost vertical, dross free
    cuts with least kerfs width 
  •  
  • Long Cable Length Standard Torch link length of
    7 meters with alternative to stretch out up to 30
    meters 
  •  
  • Powder Coated Chassis Panel Robust
    configuration with powder covered case panel
    guarantees long life at site ground also.
  •  
  • For more information about Plasma Cutting
    Machine, Laser Marking Engraving and Laser
    Metal Cutting Machine please visit us.
About PowerShow.com