Warrender - Seal-less Magnetic Drive Pumps Authorized Distributor

1
SEAL-LESS MAG-DRIVE PUMPS
WARRENDER, LTD. Seal-less Mag-Drive Pumps From
Stock or Built-to-Spec

Providing environmentally safe seal-less magnetic
pumps of the highest quality for over 30 years
Our company goal is to provide the solutions that
protect our surroundings, raise the environmental
awareness, and promote the growth of the
community.
Three Designs Provide Complete Hydraulic Coverage
? High head turbine for OEM and transfer
systems ? High flow centrifugal for
compressor circulation systems ? Low flow
rotary vane for injection systems
Typical Applications
Liquid Ammonia, CO2 and Fluorocarbon
Refrigerants All EPA monitored chemicals Dangerous
, toxic, noxious and carcinogenic
liquids Solvents, hydrocarbons, pyrophorics and
other volatile liquids Heat transfer fluids (up
to 650 F, 840 F w/ heat exchanger). Hot / super
heated water Liquefied gases Cryogenic fluids
(down to -150C) High pressure circulation
systems Pressurizing mechanical seal
pots Sampling, metering or chemical injection
systems
? ? ? ? ? ? ? ? ? ? ?
Seal-less Zero Emissions Low Heat Load No Flashing
2
WARRENDER SEAL-LESS MAG-DRIVE PUMPS
OEM PROCESS PUMPS From Stock or Built-to-Spec
Warrender mag-drive seal-less pumps meet EPA zero
emissions regulations with versatile magnetic
coupling tech- nology. Minimal heat loads, field
serviceability and lower installation costs are
significant process advantages. Solve your most
challenging pumping problems with reliable and
cost effective solutions.
Zero Emissions and Maximum Safety
Benefit from a process free of leakage,
contamination or toxic releases while avoiding
constant monitoring and po- tential environmental
fines. Eliminate all toxic and dangerous chemical
releases including explosive and volatile liq-
uids that can react with atmospheric contact.
Advanced Technology and the Highest Quality for
Long Pump Life
WARRENDER pump designs are built to the highest
quality standards to protect your process,
preventing costly maintenance and lost production
time.
? Robust, high thickness pump casings ?
High efficiency impellers with low NPSH
requirements ? High strength, rare earth
magnetic couplings suitable for extreme
temperatures ? Heavy duty rear casings in
single or double walled non-welded design ?
Rugged internal bearing system withstands process
upsets
Performances to the Extreme
? Flows from 0.1 to 2500 gpm ? Pressures
up to 1,500 psig (MAWP) ? Heads to 1,500
feet ? Temperatures from -238F to 600 F ?
Pump liquefied gases or liquids with low
NPSH ? Compatible with VFD control systems
Centrifugal Mag-Drive Pump - Cross-Section
3
Series WMTA-LN Regenerative Turbine (high heads,
low to medium flows)
Regenerative Turbine Pump - 2 Stage 3D
Cross-Section
Transfer Pumps Low NPSH - High Head, Seal-less
Turbine Series WMTA-LN mag-drive regenerative
turbine pumps safely meet high head, low NPSHa
system requirements. Dynamic turbine impeller
pumping action handles entrained gases to resist
vapor locking.
WMTA-LN Features
? High head pumping with pulsation free
performance ? Handles up to 20 entrained gas,
resists vapor locking ? Dynamic design (avoid
over pressurization w/ P.D. pumps) ? Low heat
induction to avoid flashing
WMTA-LN Performance Range ? Flows from 0.25
to 45 gpm (0.5 - 10 m3/h) ? Heads to 900 feet
(230 m) ? System Pressures to 1450 psig (100
bar) ? Temperatures from -148 to 572 F (-100
to 300 C) ? NPSHr to 1
Regenerative Turbine Pump - 2 Stage Cross-Section
Regenerative Turbine Pump - 3 Stage Cross-Section
4
WARRENDER, LTD.
Authorized Distributor 821
Sivert Drive Wood Dale, IL 60191 Phone
847-247-8677 Toll Free 888-24 PUMPS Fax
847-247-8680 Web site www.warrender.com Email
sales_at_warrender.com
05-2013