Lifting Equipment Inspection, Non Destructive Testing in Dubai, UAE at Dutest - PowerPoint PPT Presentation

About This Presentation
Title:

Lifting Equipment Inspection, Non Destructive Testing in Dubai, UAE at Dutest

Description:

Dutest is the most experienced Third Party Inspection body and suppliers of Lifting Equipment Inspection throughout UAE and Qatar. Our Partners are Cantek, Tractel Gripton and Dillon. – PowerPoint PPT presentation

Number of Views:1179

less

Transcript and Presenter's Notes

Title: Lifting Equipment Inspection, Non Destructive Testing in Dubai, UAE at Dutest


1
  • Established In 1980, Dutest is one of the first
    and most experienced third party inspection
    bodies and suppliers of lifting equipment
    throughout the UAE.

Products and Services Dutest contains two
inter-divisions that cater to servicing the
market of petroleum, metal manufacturing,
shipping, contracting and crane rental companies
to name a few. These inter divisions are
inspection and supply. The inspection division
inspects tests and certifies the entire range of
lifting gear and equipment, as well as other
industrial equipment. The supply division aids
the inspection division through a variety of
lifting accessories as well as catering to
general market demand.
2
About Dutest
  • Dutest is one of the most experienced third party
    inspection companies throughout the UAE.
    Established in 1980, our services have extended
    across an exhaustive list of prestigious
    clientele. We understand the local market and the
    growing importance of occupational safety
    throughout the Middle East and, henceforth, the
    necessity to provide proficient, robust and
    consistent goods and services. The implementation
    of various quality management systems, such as
    ISO 90012008 and ISO/IEC 170201998, as well as
    an international member of the British Standards
    Institute, verifies our commitment to providing a
    quality-consistent product, all backed up by an
    experienced LEEA (Lifting Equipment Engineers
    Association) qualified engineering team. This,
    considering our professional approach,
    competitive rates, exemplify why we remain one of
    the market leaders today.

SEE OUR BRANDS
3
Divisions
  • Manufacturing Tradinging
  • The supply division of Dutest provides a wide
    range of lifting accessories and safety
    equipment. This division aims to complement its
    inspection and testing division, whilst also
    satisfying general demand for such products in
    the market. Some of the product range fall under
    the headings of Wire Rope Slings and Accessories,
    Chain Slings, Webbing Slings, Chain Blocks, Load
    Indicators and Load Cells. All of these products
    conform to internationally recognized standards
    such as BS EN, ASME and more.

Inspection Testing The Inspection division of
Dutest is involved in third party inspection
services of a wide range of heavy plant, cranes
and lifting and marine machinery. Some of the
brands that Dutest is specialized in servicing
include Demag, Kone, Liebherr, Kato and Tadano.
These inspection services are carried out with
state-of-the-art technology such as Eddy Current,
Thermal Imaging, NDT inspection (such as MPI and
Dye Penetrant Testing). This, combined with
quality engineers who have all been built on
rigorous training and years of experience and who
all are LEEA body audited, ensures the highest
quality and reliable inspection and testing
services.
4
Lifting Supplies Products
Chain Slings Fittings
Wire Rope Slings Fittings
General Lifting Gears
5
Shackles
Webbing Slings
Force Measuring Equipment's
6
Inspection Testing Services
  • The Inspection Division of Dutest is involved in
    third party inspection services of a wide range
    of heavy plant, cranes and lifting and marine
    equipment of brands such as Demag, Kone,
    Liebherr, Kato and Tadano to name a few. These
    inspection services are carried out with state of
    the art technology such as Eddy Current, Thermal
    Imaging, NDT Inspection such as MPI and Dye
    Penetrate Testing. This combined with quality
    engineers, which are all LEEA body audited,
    ensures the most highly qualified and reliable
    inspection and testing services. In addition, the
    company complies with highly regulated standards
    such as ISO 90012008 ISO/IEC 170201998 that
    are both continually audited and renewed by Det
    Norske Veritas and Dubai Accreditation Center.
  • Dye Penetrate Testing
  • Dye Penetrate is a method of detecting surface
    flaws (cracks) using a chemical ink and a
    developer. The basic principle is to spray the
    area to be checked with a penetrating ink (Red)
    which will leech in to any surface defects. This
    is then cleaned off. A developer (White) is then
    sprayed over the same area and any residual ink
    will show through the white indicating the
    location of any surface defects. The sample or
    area to be inspected must be clean and free from
    paint, corrosion or other surface coatings. Can
    be used on both ferrous and non-ferrous material,
    will only detect surface cracks.

7
Magnetic Particle Testing Magnetic Particle
Testing is similar to Dye Penetrate Testing, only
a magnetic ink is sprayed on the prepared surface
and a strong magnetic force applied to the area,
instead. Cracks and inclusions will show up in
the ink pattern. This technique can be used for
slightly deeper and sub-surface defects. It can
only be used on ferrous material, where the
surface must be free from paint, corrosion and
surface coatings. Additionally, an Ultra Violate
ink is available allowing inspection in areas of
low light.
Thickness Gauging Thickness Gauging is used to
measure internal corrosion, externally. This
allows corrosion checks on equipment such as
pressure cylinders, tanks and pipe work, and many
more. This technique is suitable for checking
equipment without having to open or enter the
area that requires checking. Again, this can be
done without removing the external coating which
is very convenient.
Welding Inspection A weld is a fusion of
metals. In order to have a qualified weld, it has
to be inspected by a certified welding inspection
personnel. There are various parameters involved
with the welding technology and needs a proper
monitoring for which our engineers are certified,
highly trained, experienced and qualified.
8
Thermal Imaging Thermal Imaging (Thermography)
is an optical method of recording heat signatures
of plant equipment and structures while in
operation and location abnormalities or
temperature differences. This can be used in
several ways. As a preventative maintenance tool
to show up items running hot, hot spots where an
item may fail or cause a fire or heat loss
through insulation or thermal bridges. It can
also be used as predictive maintenance, where a
bench mark image is taken and then compared with
subsequent images taken at a set period (say six
months). This will show up temperature changes,
which may indicate deterioration of a process or
equipment, allowing scheduled maintenance to be
planned so as to minimize impact on production or
services. Thermal imaging can also be used to
investigate or locate leaks or water ingress and
insect damage or just measure the thermal
efficiency of a building.
Heavy Lifting Supervision Heavy Lifting
Supervision is carried out by Dutest
occasionally. One example would be the load out
of 70 tons diesel generators from Sharjah Saif
Zone, UAE to Afghanistan. Effectively, Dutest
takes charge of the planning, supervision of a
lifting operation from the early Method
Statement phase, to Lift Plan and supervision
and execution of the actual lift, choice of crane
and lifting tackle.
9
Load Testing Load testing is part of Dutests
normal crane and lifting gear examination and
consists of applying a load of suitable
proportions to establish the integrity of the
item being tested. Tirak / Minifor
Services Tirak and Minifors are rope hoists
manufactured by Tractel France. Dutest is one of
the official service centers for these
machines. Crane Safety Equipment Installation,
calibration and maintenance of safe load
indicators and tensile cells, as well as training
services for the Dutest SLI brand of load
indicator are available in association with
Cantek (Australia). EOT Crane installation,
maintenance and repair services also available.
10
Recognition Dutest one of the leading lifting
inspection companies in the region. The quality
and reliability of our service is backed by a set
of certifications, in-line with both national and
international standards.
Lifting Equipment Engineers Association
Accredited engineers with over 25 years
experience
ISO 90012008 Quality Management System Det
Norske Veritas approved manufacture, renewed and
audited annually
Accredited and audited by the Dubai
Accreditiation Center as per ISO/IEC 17020 1998.
11
At Your Service- contact

Dubai Abu Dhabi PO Box 5389, Dubai, UAE.Tel
971-4-8067676 Fax 971-4-8067688 Email aircondi
tioning_at_bindasmal.comWebsite www.
kadairconditioning.com
Regional Sales Network
OMAN KSA QATAR PO Box 1084, P.C. 130,Al
Misfa New Industrial Area, Sultanate of OmanTel
968 2443 7226Fax 968 2443 7220Email dasmaltr
ading_at_bindasmal.comWeb www.dasmaltrading.com
Write a Comment
User Comments (0)
About PowerShow.com