Title: Introducing iConnectorLE A LowCost IPEnabling Adapter for 2.5G and 3G Cellular Modems
1Introducing iConnectorLEA Low-Cost IP-Enabling
Adapter for 2.5G and 3G Cellular Modems
22.5/3G Apps Need Internet Protocols
- Modems usually include IP layer, not TCP/UDP
- You must rewrite application to support TCP/IP
- Internet programming expertise required
- May require major HW and SW redesign
- Issues Time-to-market, cost, development risks
- Must overcome limitations of 2.5/3G network
3The Do-it-Yourself Approach
- Redesign hardware (if needed)
- Select new processor, add memory (if needed)
- Buy / develop TCP/IP stacks and maybe new OS
- Rewrite application
- Integrate TCP/IP stacks and commands
- Debug, test, debug, test
- Invest many man-months and lots of money
- Financial, technological and marketing risks
4Wireless Modems with TCP/IP
- Every modem implements TCP/IP stack differently
- Limited implementation of TCP/IP stack on modem
- Generally dont include upper layer protocols
- Lack features to optimize 2.5/3G connection
- Require Internet programming for application
- Dont include a mode for streaming data
- Are not plug-and-play
5What Do Customers Want?
- Use existing application
- Low-cost, risk-free wireless IP connectivity
- Minimum changes to current product
- Avoid Internet programming
- A choice of Internet protocols
- Easy implementation and maintenance
- Reliable connectivity and excellent support
6What Does Connect One Offer?
- All of the above in one compact,
- off-the-shelf product !
53 x 33 x 17 mm (2.1 x 1.3 x 0.67 in.)
7Why Use Connect One Solutions ?
Plug-and-Pray
The Internet is
- Dynamic constantly in flux
- Complex more than just TCP/IP
- Inconsistent ISPs, servers
- Not your core competency
Which is better Do-it-yourself or off-the-shelf?
8Connect One Value Proposition
- Eliminate the time, cost and complexity of
connecting devices to the Internet
- Cost of acquisition cost of ownership
- No financial, technological or marketing risk
- An off-the-shelf solution makes more sense than a
do-it-yourself solution
9Core Technology iChip
- Internet controller that mediates Internet link
- gt500k units installed since 1999 with 100s of
ISPs in over 50 countries
- Works with any host device and any (or no) host
operating system
- High-level API for easy, fast implementation
- Internet protocols and configuration parameters
are stored in remotely updateable flash memory
10iChip Protocol Stack
SMTP
DNS
HTTP
FTP
SerialNET
PAP/CHAP
PPP
IPCP
LCP
11ATi Protocol
- Logical interface between application and iChip
- Internet extension to AT command set
- Always adding new functionality and features
- ASCII commands invoke Internet protocols on iChip
- Requires just a few commands on host application
- Transparent Mode AT commands bypass iChip
- Internet Mode accesses ISP via host ATi
commands - SerialNET Mode requires no change to application
12SerialNET Mode
- Bridges between ASCII data and TCP/IP packets
- Uses TCP/UDP sockets to connect to remote device
- No need for ATi commands on host device
- Device can act as server or client
- Ring response server for automatic wake-up
- Connectivity watchdog ensures that modem is
always online
13iConnectorLE True Plug-and-Play Device Server
- Connects installed devices to Internet via serial
port - Works with most cellular modems/handsets and any
analog modem - No Internet programming required
- No modification to host application or OS
- No modification to host device hardware
- Works with any wireless operator anywhere
14iConnectorLE Features
- Includes iChip CO110PC with locally updateable FW
- Basic FW includes 10 simultaneous TCP/UDP
sockets, two listening sockets, Web client, and
RAS server - Optional FW versions Basic FW plus SerialNET
mode or SMTP/FTP client mode - DTE-DCE (female-male) configuration
- Takes power from pin 9 of host device DB-9
connector - Extended temperature range operation
- Supports 2400 through 230k bps baud rates
15Value-Added Features for 2.5/3G
- Optimized to improve cellular networks low
reliability. - Always Online mode automatically reconnects if
modem disconnects, or if signal or connection is
lost. - IP Registration via sockets, email or Web enables
accessing devices with dynamic IP addresses. - Packet filtering reduces unneeded transmissions,
costs. - Send AT commands during Internet session.
- Device Connectivity Server enables accessing
devices within a cellular network from outside
the network.
16Device Connectivity Server Ensures Remote Access
Firewall/NAT
Device Connectivity Server
Optional Device Connectivity Server overcomes
NATs and firewalls by using a proxy server and
agent for remote access
Dynamic/Private IP Addresses
17Device-to-IP Network Data Flow
IP Address xxx.xxx.xxx.xxx
Servers
Internet
Wireless Modem
Wireless Operator
iConnector
Utility Meter (DTE)
18Ordering Information
- Basic firmware supports 10 simultaneous TCP and
UDP sockets two listening sockets HTTP client
- SNET firmware version support basic functions
SerialNET mode
- ESFT firmware version support basic functions
email send and FTP client
- iC-EVB-100-110/220 evaluation board enables
programming and testing
19Summary
- iConnector LE offers unequalled value and much
more than just TCP/IP connectivity. - It is the easiest-to-use, most cost-effective,
reliable and flexible Internet-enabling solution
for any deployed device.