Schaefer Technologies, Inc. For all your Capsule Filling, Banding, Tableting, Blister Packing, and Isolation Equipment Requirements

1
Schaefer Technologies, Inc.For all your Capsule
Filling, Banding,Tableting, Blister Packing,
andIsolation Equipment Requirements
2
STI Model-10 ver 4.2 Capsule Filler with CP-4200
Capsule Polisher

• The Model-10 with the HMI Touch Screen Controller
  is the Work Horse of the capsule filling
  industry.
• A semi automatic 2 piece capsule filler
• Capsule sizes 000, 00, 0, 1, 2, 3, 4 and DB
  capsules.
• Ideal for over-encapsulation
• 18,000 to 25,000 capsule per hour.
• CP-4200 Capsule polisher is the perfect in-line
  companion to the Model-10 Capsule Filler.

3
IN-CAP Dott.Bonapace Automatic Bench Top
Capsule Filling Machine

• The IN-CAP the first fully automatic bench top
  capsule filling machine.
• Very popular all over the world among Research
  and Development laboratories, for clinical trial
  research and batch production.
• IN-CAP dosing capabilities are powder, liquid,
  pellets, mini-tablets, and over-encapsulation.
• Output 3,000 capsule per hour.

4
CPR-6 Dott.Bonapace Single Station Tablet Press

• Single punch automatic tablet press.
• The CPR-6 is one of the smallest bench top tablet
  press existing.
• Compression force of 2.5 tons.
• Output of 2,500 tablet per hour.
• Maximum tablet diameter is 16 mm.

5
STI LF-10 ver 1.1 Liquid Capsule Filling Unit

• LF-10 two piece hard gelatin or vegetable based
  capsules.
• Will fill products with viscosities of 100 to
  1,000 cps
• 8 liter heated hopper with stirrer.
• Production capacity ranging from 10,000 to 25,000
  capsules per hour, depending on capsule size and
  formulation.

6
STI CB-15 Automatic Capsule Banding Machine

• The CB-15 is designed to band the joint portions
  of the cap and body of filled capsules.
• Maximum 15,000 capsules per hour.
• Capsule sizes 000-4.

7
STI Laboratory Model Capsule Bander

• The STI Laboratory Model Capsule Bander is
  designed to band the joint between the capsule
  cap and body in order to prevent leakage of
  liquid products, reduce oxidation of the contents
  in the capsule
• Since the machine simulates the production
  machines, it is possible to make low volume runs
  for clinical trails, comparative studies,
  stability studies, etc.

8
MINICAP-100 Dott.Bonapace Capsule Processing
Machine

• MINICAP-100 orientating and Filling set-up
• Ideal for research laboratories, pharmacies and
  quality control departments where small
  production batches are required.
• It uses a 100 hole tray.
• Hourly output 2,500 capsules per hour.

9
IN-PACK Dott.Bonapace Semi-Automatic Blistering
Machine

• The IN-PACK is the blistering machine, ideal for
  clinical trials, stability testing, pack
  development and low volume production for
  laboratories.
• The machine does thermoforming, sealing, coding
  and cutting blisters in PVC/ALU and ALU/ALU.

10
SIMPATY Dott.Bonapace De-Blistering Machine

• The Simpaty is a blister opening machine.
• This machine is used to recover product from a
  blister card.
• The machine helps operators save time, by not
  having to recover product by hand.

11
STI Wet-in-Place Isolated IN-CAP
Dott.BonapaceCapsule Filling System

• Designed for Small Volume Capsule Filling
  Projects (Powder, Pellets, Bead Liquid)
• Perfect for RD and Clinical Trials
• The System utilizes re-circulated air and is HEPA
  filtered to achieve ISO class 5 levels when
  measured in static conditions
• Negative or Positive Pressure
• Breach System
• Wet In Place (WIP) Spray Wand for Wetting
• Capsule discharge to Continuous Bagging System
• Can Be Customized To Your Requirements

12
To schedule a visit or for additional
information - call 800-435-7174.

• www.schaefer-technologies.net
• www.schaefer-technologies.com
• KSchaefer_at_schaefertech.us