Your NISSAN is equipped with the Bluetooth HandsFree Phone System' If you are an owner of a Bluetoot

1
Bluetooth

• Your NISSAN is equipped with the Bluetooth
  Hands-Free Phone System. If you are an owner of a
  Bluetooth enabled Mobile phone, you can set up
  the wireless connection between your Mobile phone
  and the in-vehicle phone module. With Bluetooth
  wireless technology, you can make or receive a
  hands-free telephone call with your Mobile phone
  in the vehicle.

This slides are controlled by you use the mouse
to go through it up and down
2
Bluetooth
This slides are controlled by you use the mouse
to go through it up and down
3
Bluetooth
5 mobiles can be registered 40 telephone numbers
/ phone can be stored
This slides are controlled by you use the mouse
to go through it up and down
4
Bluetooth
Guidance language Arabic and
English Operation Only by steering switches
Each operation can be confirmed by
voice guidance Phone book Numbers should be
registered together with voice saying the name
This slides are controlled by you use the mouse
to go through it up and down
5
Before using the Bluetooth Hands-Free Phone
Bluetooth

• Set up the wireless connection between a mobile
  phone and the in-vehicle phone module before
  using the hands-free phone system.
• Be sure of
• Your vehicle is inside of the mobile service
  area.
• Your vehicle is in an area where there is
  mobile signal not in a tunnel, or in an
  underground parking garage.

This slides are controlled by you use the mouse
to go through it up and down
6
USING THE SYSTEM
Bluetooth

• Initialization (first day)
• Place the ignition switch into the ON position
• Keep the interior of the vehicle as quiet as
  possible.
• 1- Push the phone button
• 2- The system will ask you for pairing the mobile
  phone
• 3- Open the Bluetooth on your phone and chose
  pair new device, your phone will find NISSAN
• 4- Click pair and use the code the system said to
  you.
• 5- If the pairing run well the system will ask
  you to say the name of the phone.
• Wait until the tone sounds before speaking a
  command.
• Start speaking a command within 5 seconds after
  the tone sounds.
• Speak in a natural voice without pausing between
  words.
• 6- Now the phone is paired and ready to use.

This slides are controlled by you use the mouse
to go through it up and down
7
Bluetooth

• 2nd day
• Enter the car open the Bluetooth on your mobile,
  push the phone button
• The system will say the mobile name and it will
  be ready to use
• If more than one mobile is registered to the
  system you have to chose it by

This slides are controlled by you use the mouse
to go through it up and down
8
Adding a new mobile
Bluetooth

• Place the ignition switch into the ON position
• Keep the interior of the vehicle as quiet as
  possible.
• 1- Push the phone button then
• 2- The system will ask you for pairing mobile
  phone
• 3- confirm by pushing the
• 4- continue as a new phone

This slides are controlled by you use the mouse
to go through it up and down
9
Adding a contact to your car system
Bluetooth

• After your phone is connected to the system push
  the button the system will ask you for
  adding a new contact (if you push more than one
  time the system will give you new options such as
  deleting a paired phone etc) confirm by the
  button then the system will ask to send
  the contact and then to say the name of the
  contact.
• If this contact will call you the system will say
  the name by your voice

This slides are controlled by you use the mouse
to go through it up and down
10
Nice to know
Bluetooth

• The system always ready to help you if you ask
  for the help by saying HELP it during the system
  running.
• You can cancel any command any time by pressing
  and can use it to finish a call
• Press and hold then the system will ask
  you to say the name of the contact to dial
• To change the language press and hold then
  chose then confirm

This slides are controlled by you use the mouse
to go through it up and down