44221: Information Systems

1 / 22
About This Presentation
Title:

44221: Information Systems

Description:

44221: Information Systems: Introduction to Module. Why study ... EZPC assemble PC Systems for sale to customers such as PC World, Dixons, Currys, etc. ... – PowerPoint PPT presentation

Number of Views:89
Avg rating:3.0/5.0
Slides: 23
Provided by: ianp6

less

Transcript and Presenter's Notes

Title: 44221: Information Systems


1
44221 Information Systems
Introduction to Module By Ian Perry Room
C48 E-mail i.p.perry_at_hull.ac.uk Tel 01723
35 7287 http//itsy.co.uk/ac/0708/Sem1/44221_IS/
2
Why study Information Systems?
  • An understanding of Information Systems is vital
    to business management and information technology
    students
  • As all business organisations rely upon the
    ability of their Information Systems to
    provide/support the knowledge required for all
    levels of decision-making, i.e.
  • Strategic
  • Tactical
  • Operational

3
Learning Outcomes?
  • By the end of the module you will be able to
  • Understand why a distinction must be made between
    data, information knowledge.
  • Identify the role of Information Systems in a
    given business context.
  • Relate theoretical models of Information Systems
    to business cases, by describing a given
    situation using systems terminology diagrams.
  • Produce a working example of a computer-based
    Information Systems tool, which addresses
    specific business needs.

4
Assessment Method
  • Two, equally weighted, assignments based upon a
    common Case Study.
  • Assignment 1 - Information Systems Analysis
  • Deadline 09 November 2007 Weighting 50
  • Analyse the current information system, as
    presented by the Case Study, using appropriate
    systems diagrams .
  • Discuss where, and how, IT might be used to
    improve the efficiency and/or effectiveness of a
    specific part (i.e. sub-system) of the Case Study
    organisations information system.
  • Assignment 2 - Information Systems Tool
  • Deadline 14 December 2007 Weighting 50
  • Build a software tool that can help improve a
    specific aspect of the information system of the
    Case Study organisation.
  • Explain the usefulness of this software tool in
    support of management decision making.

5
Assignment Hand-in Process
  • You MUST hand in TWO copies of each Assignment
    for this Module.
  • BOTH copies must be submitted by 3pm of the
    submission date.
  • An Electronic Copy (via Turnitin)
  • Add the following to the table on Page 14 of the
    IS Module Handbook.
  • Class ID 42019
  • Password 1224
  • Assignment 1 Code Name E1 IS Analysis
  • Assignment 2 Code Name E2 IS Tools
  • See the Assessment Method page of the IS
    Web-site in order to find out how to enrol for
    use Turnitin.
  • A Paper Copy (to the School Office)
  • With properly completed Front-sheets, and a
    Turnitin receipt, in the correct drawer of the
    wooden filing cabinet outside of CH5.

6
EZPC Case Study
  • EZPC assemble PC Systems for sale to customers
    such as PC World, Dixons, Currys, etc.
  • Each PC System is made-to-order (as a result of
    a request from a specific customer), based on a
    limited set of Standard PC Configurations.
  • The computer components (i.e. Processors, Hard
    Disks, Memory, etc.), from which the PC systems
    are assembled, are purchased from a number of
    suppliers.
  • EZPC also sells computer components directly to
    the same Customers.
  • The components, either waiting to be assembled
    into PC Systems, and/or to be passed on directly
    to EZPCs customers, are stored at one of three
    different warehouse locations, i.e.
  • Leeds, Newcastle, Reading
  • The Leeds Warehouse acts as the Head Office for
    EZPC
  • all dealings with suppliers are controlled from
    the Head Office.
  • Delivery of PCs and components is contracted out
    to a national distribution company.

7
EZPC At each Warehouse
  • A sales team deals with their local customers.
  • A second group of staff work out what components
    are required to fulfill each customer order.
  • A third group of staff assemble the PCs.
  • A fourth group of staff control the warehouse
    operations
  • ordering receiving components from suppliers,
  • passing components on to the assembly process,
  • receiving completed PCs back from the assembly
    process,
  • packing PCs and components prior to delivery.

8
EZPC How things Work?
  • When a request arrives from a Customer it is
    either broken down, by the Planning Department,
    to produce a work order (if the request is for
    complete PCs), or passed directly to the
    Warehouse, as a component list (if it is a
    request for components).
  • Each work order lists the number and
    specification of each component (mother-board,
    monitor, keyboard, etc.) that will be required to
    assemble the requested PCs.
  • The work order is then passed on to the
    Assembly Department, who must then check with the
    Warehouse for the availability of enough PC
    components in order to complete each work order
    before commencing assembly.
  • If a work order can not be completed, due to a
    lack of components, then the Warehouse must raise
    a purchase order (via the Head Office) with one
    of EZPCs Suppliers.
  • When enough components are received from EZPCs
    Suppliers, then the Warehouse notifies the
    Assembly Department and the assembly process can
    commence.
  • Once the Assembly Department has completed a
    work order then the assembled PCs are passed
    on to the Warehouse.
  • The Warehouse then produces delivery lists for
    each Customers order, and uses these as picking
    lists in order to find the PCs and/or components
    in the warehouse, and pack them ready for
    delivery.

9
EZPC Problems?
  • Each work order is currently produced by hand,
    which is both very time consuming and often leads
    to mistakes, both of which upset the customers.
  • Each of the Warehouses is quite small, and can
    only hold a small stock of computer components
    and assembled PCs, so work orders often become
    purchase orders (once again a manual
    calculation).
  • There was some talk of moving to larger
    Warehouses, but these plans have been abandoned,
    as EZPC can not afford to hold any more stock
    than they do now.
  • Raising a purchase order with one of EZPC
    Suppliers can result in a delay of up to 10 days
    for the delivery of the computer components.
  • Often, even when Warehouse is almost full of
    computer components, a work order cannot be
    completed, as these are the wrong components with
    which to satisfy a specific customer request.

10
Lectures (CG1) Workshops (IT4)
  • Introduction to Module
  • Systems Concepts 1
  • Systems Concepts 2
  • Review Ass 1 Reqs
  • -- No Lecture -
  • -- No Lecture -
  • Information for All?
  • Drawing Diagrams 1
  • Drawing Diagrams 2
  • Assignment 1 Support
  • Assignment 1 Support
  • -- No Workshop --

Assignment 1 Deadline Fri, 09 Nov, 2007
  • Intro to Spreadsheets
  • Org. Data / Present Info.
  • Spreadsheet Automation
  • Review Ass 2 Reqs
  • -- No Lecture --
  • Useful SS Functions
  • Worksheets Charts
  • Macros Printing
  • Assignment 2 Support
  • Assignment 2 Support

Assignment 2 Deadline Fri, 15 Dec, 2007
11
Data, Information Knowledge
  • A clear understanding of difference between Data,
    Information Knowledge is crucial if you are to
    be able to understand/develop an Information
    System.
  • Especially one that requires computer-based
    support.
  • What is Data?
  • A series of observations, measurements, or facts
    (transactions/events).
  • Collins Concise English Dictionary
  • E.g.
  • 12
  • Ian
  • Sunny

12
Data ? Information
  • What is Information?
  • data that have been transformed into a
    meaningful and useful form for people.
  • data placed in a context and given value by
    specific end-users.

13
Information Attributes
  • Information (or do I mean data?) can be thought
    of as having three dimensions
  • Time
  • Timeliness, Currency, Frequency, etc.
  • Content
  • Accuracy, Relevance, Completeness, etc.
  • Form
  • Clarity, Detail, Order, Presentation, etc.
  • Information is often affected by more than one of
    the above.

14
What is this? - 120507
  • Why did you say that?
  • People tend to look for a familiar structure
    place data in a familiar context, e.g.
  • 120507 DD/MM/YY 12/05/07 12 May 2007
  • We use structure context to transform the data
    we receive into information.
  • However
  • Different people may see a different structure
    and/or might apply a different context to the
    data they receive
  • What if your context were international?
  • What if you were me?

15
So?
  • Information Data Structure Context
  • The same data can give different information if a
    different structure and/or a different context is
    applied.
  • Try these
  • SSMTW_ what letter is next?
  • SDLMM_ what letter is next?

16
Knowledge
  • What is Knowledge?
  • That which is gained by the possession of
    information.
  • Enabling people to
  • have a better understanding of a situation
  • And/Or
  • make better decisions.

17
An Information Systems Approach
  • Information Systems ? Computer Systems
  • Need to take a holistic view of
  • Organisation, People, and Technology.

18
Summary
  • Data ? Information
  • Data are simply facts relating to things like
    events, transactions, etc.
  • Information
  • is a people thing, because only they can
    determine the structure context with which data
    might become information.
  • Knowledge
  • is gained by the possession of information that
    enables people to have a better understanding
    of a situation and/or make better decisions.

19
Always Remember This!
Data is only potential information information
is potential knowledge and knowledge is
potential competitive advantage if it is used in
a creative, flexible, and above all, accurate
way. Adrian M (1990) Lets Get Serious. Focus
News. Winter.
20
You can not afford to miss anything!
  • Remember
  • ALL of your Year 2 marks count towards your final
    Degree Classification.
  • DO NOT leave Assignments to the last minute
  • Quite a few of last years students failed
    Assignment 1 for the IS Module.
  • DO NOT miss any Lecture or Workshop sessions.
  • There are Lectures Workshops for the IS Module
    almost EVERY WEEK.
  • The first IS Workshop session takes place
    immediately after this Lecture, i.e.
  • 1015 to 1205, in IT4.

21
This Weeks Workshop
  • Explores the way in which roles within a business
    (i.e. which Department you work for) impact upon
    data sharing, data use and data maintenance
    responsibilities.
  • Read the Case Study Form a Team
  • i.e. the Case Study for Assignments 1 2
  • each team will represent ONE of six Departments.
  • Complete a Data Use Statement
  • by reference to a limited set of data, from your
    chosen Departments perspective.
  • Compare Data Use Statements
  • to see if the other Departments agree with your
    teams analysis.

22
Web-site Development
  • The WSD Lectures (which take place every other
    week) will begin THIS WEEK i.e.
  • 1215 to 105, on Friday, in CG3
  • The WSD Workshops (which also take place every
    other week) will begin NEXT WEEK
  • 215 to 405, on Friday, in IT2
  • Please Note
  • The WSD Module may be cancelled, unless a few
    more students sign up for it
  • so, start looking for an alternative.
Write a Comment
User Comments (0)