Successes in Eliminating Supermarket Leaks - PowerPoint PPT Presentation

1 / 19
About This Presentation
Title:

Successes in Eliminating Supermarket Leaks

Description:

Equipment exceeding limit must be repaired or retrofitted ... Mark Twain. 6. Benefits: VISION. Change the Industry's Perception Regarding Leaks ... – PowerPoint PPT presentation

Number of Views:58
Avg rating:3.0/5.0
Slides: 20
Provided by: jimw87
Learn more at: http://www.ashrae.org
Category:

less

Transcript and Presenter's Notes

Title: Successes in Eliminating Supermarket Leaks


1
Successes in Eliminating Supermarket Leaks
  • Bruce Smythe
  • Hill PHOENIX
  • VP/GM Systems Division
  • Conyers, GA

James H. Windham Hill PHOENIX Quality Manager
Systems Division Conyers, GA
2
Outline
  • Vision
  • Leak Improvements Inside the Supermarket Sales
    Area
  • Leak Improvements in Equipment Rooms/Racks
  • Conclusion
  • QA

3
Regulatory Implications
Mandate 35 maximum annual allowable leak rate
Equipment exceeding limit must be repaired or
retrofitted
Knowingly venting HCFC or HFC is a violation
  • GOAL
  • Elimination of refrigerant leaks

4
Contradictions Regarding Leaks
Everyone agrees that refrigerant leaks are
completely undesirable!
Why?
Cost
Environmental Impact
Agency compliance
Store disruption
HOWEVER In practice today, high leak rates are
generally accepted in the industry as the
norm and unavoidable
5
  • The trouble with the world is not that people
    know so little, but that they know so many things
    that aint so.
    Mark Twain

6
VISION
Change the Industrys Perception Regarding Leaks
Virtual Leak Free Supermarkets Can Be Attained
Today!
Eliminate Refrigerant Leaks in the Supermarket
Sales Area
Eliminate Refrigerant Leaks in the Equipment
Rooms (Racks)

Benefits
  • Environmentally friendly supermarkets
  • Reduced customer and OEM costs
  • Meet or exceed any agency requirement

7
Challenge 1 How to design and build Systems that
virtually do not leak inside the supermarket
sales area?
8
System Comparisons
Initial Charge 700 Leak Potential Low Leak
Containment Excellent Leak Serviceability Excellen
t
Initial Charge 1400 Leak Potential High Leak
Containment Poor Leak Serviceability Poor
Initial Charge 1700 Leak Potential High Leak
Containment Marginal Leak Serviceability Poor
Based on typical 60K sq ft store utilizing loop
piping.
9
Successful Applications of Secondary Technology
2003 50,000 sqft California Store
2004 102,000 sqft Quebec Store
  • Consumes approximately 14 less electricity
    than a state-of-the-art multiplex refrigeration
    system (baseline system) installed in a
    comparable store
  • Has a refrigerant charge that is ten times less
    than the baseline system (less than 500 lbs)
  • Refrigerant charge reduced to 600 from 3600
  • Heat recovery is so great that the furnace
    normally used in a conventional supermarket has
    been completely eliminated
  • Greater reliability of equipment, longer
    lifecycle and lower maintenance costs.

www.ctec-varennes.rncan.gc.ca
www.energy.ca.gov
10
Challenge 2How to design and build equipment
rooms (racks) that virtually do NOT leak?
11
All racks leak and it is unavoidable
2001 Industry Presumption and Culture Myth
Reasons given for leaks inevitability
  • Flares always leak
  • Valves always leak
  • Vibration causes leaks
  • Connections come loose during shipment
  • Shipping pressure doesnt matter
  • Etc. Etc. Etc..

12
Other Manufacturers Have Eliminated Leaks
New model
Old model
All units leaked oil in old model
No leaks
What Changed?
Technology
Customer Expectations
13
Changing Culture
Had to destroy the culture myth that leaks are
unavoidable
  • To prove the concept
  • Built a 5 compressor rack
  • Leak checked using Helium at 1/10 oz per year
    rate
  • Simulated shipping from Georgia to California and
    back
  • Retested with no leaks

We can and will build LEAK FREE units!
14
Define Measure Analyze Improve Control (DMAIC)
Implemented Six Sigma Process Changes
  • Track leaks by area and type
  • Braze penetration methods
  • Flare torques
  • Helium leak detection 99 helium at 250 lbs
  • Helium molecule is 1/10 the size of a refrigerant
    molecule
  • It would take 24 minutes to form 1 bubble
  • Flow/Lean manufacturing methods
  • Subassembly testing
  • Pressure decay testing using helium

15

16
(No Transcript)
17
Results
Base Year
Leak FREE is attainable!
18
Leak Free Benefits
Environmentally Friendly
19
Conclusion
The technology is available
  • If there is commitment, it can be done
  • The leak rate is a direct reflection of what is
    demanded
Write a Comment
User Comments (0)
About PowerShow.com