The course will provide a complete and uptodate overview of the area of offshore pipeline engineerin

1
A Four Day Course on
Organised by
FUNDAMENTALS OF PIPELINE ENGINEERING
In collaboration with
2 6 January 2006 UTM City Campus, KUALA
LUMPUR, Malaysia
Kuala Lumpur Petroleum Academy
Key Benefits

• At the end of this 4-day course, the
• participants will
• have an understanding of the pipeline structural
  analysis and design
• gain a practical understanding of pipeline
  materials and corrosion problems and protection

WHO SHOULD ATTEND The course is intended for
engineers, inspectors and managers responsible
for the design, integrity, inspection,
maintenance and repair of pipelines
INTRODUCTION

• The course will provide a complete and
  up-to-date overview of the area of offshore
  pipeline engineering taking participants through
  the pre-design phase, design, construction,
  installation, operation and maintenance

COURSE CONTENTS

• DAY 1- Introduction to Offshore Engineering
• - Design Overview Introduction to
• Offshore Pipeline Construction
• - Route Selection
• - Shore Approaches
• - Structural Design of Pipelines
• - On-Bottom Pipeline Stability
• - Hydraulics
• DAY 2
• - Pipeline Materials Metallurgy
• - Increasing Corrosion Resistance
• - Corrosion and its Prevention
• - External Corrosion Protection with Coatings
• - Cathodic Protection Systems Design
• - Design Exercise 1

• DAY 3
• - Design Exercise 2
• - Design Exercise 3
• - Bundles Pipe-in-Pipe
• - Trenching and Burial
• - Spans
• - Pipelaying
• - Welding
• - Insulation
• DAY 4
• - Risk and Pipeline Design
• - Development and application of Pipeline Codes
• - Pipeline Monitoring Inspection
• - New Technology in Deep Water Developments
• - Upheaval Lateral Buckling
• - Pipeline Failures Repair
• - Precommisioning of New Pipelines

2
COURSE FACILITATORS
Muhamad Hazlalin He has 12 years
working experience in the field of design,
procurement and installation of offshore and
onshore oil and gas pipelines in Malaysia,
Sudan, Vietnam, Myanmar, Thailand,
Indonesia, Brunei and Abu Dhabi. He has
worked for various design consultants,
offshore installation contractors and even
operator i.e ExxonMobil.Key design experience
includes participation in basic, conceptual and
detailed pipeline design projects for
both onshore and offshore pipelines.Experience
in integrity assessment of pipelines were
obtained during involvement in EMEPMIs low,
medium and high risk studies on all
existing EMEPMI pipelines and risers offshore
Terengganu. Also involved in the procurement of
line pipes, bends, flanges, pipeline and pipe
fittings for EMEPMI offshore pipeline
project. Offshore experience includes
installation of pipelines and risers for PCSBs
Dulang and ANGSI Field Development Project on
board Laybarges D B26 a and Kuroshio 1. Also
involved in pipeline route survey on board TLGH
Racal Survey Vessel for Petronas and EMEPMI
projects.
Assoc. Prof. Dr. Nordin Yahaya Assoc. Prof. Dr.
Nordin Yahaya is currently the Marketing
International Student Manager, School of
Postgraduate Studies, Universiti Teknologi
Malaysia. Dr. Nordin graduated with BE (Hons) in
Civil Engineering from Salford University (1988),
MSc. In Offshore Engineering from Cranfield
University (1992) and PhD in Civil and Offshore
Engineering from Heriot Watt University, United
Kingdom (1999). In 2000, he was awarded Young
Graduates and Scientists Award by Volkswagen
Foundation, Germany. He is currently doing his
research on Pipeline Assessment and Structural
Reliability sponsored by UTM and Federal
Government Grants. He has presented many papers
at international and national Conference in these
areas of expertise.
Appproved Training Provider by the Ministry of
Human Resource (Reg. No 045) Staff from more
than 300 local and overseas companies have
attended our life-long learning programmes. Some
of these companies are PETRONAS, SHELL, BP,
SAUDI ARABIA BASIC IND. CORP. (SABIC), QATAR LNG,
ALMARAI (SAUDI ARABIA), IDEMITSU, EASTMAN
CHEMICALS, BASF PETRONAS, KUWAIT INSTITUTE for
SCIENTIFIC RESEARCH,SUDAN REFINERY, YOZAI etc.
(Fee is inclusive of lunch, refreshments and
course materials)
Course Fee
Single 2 or more 2550 2350
2250
Local Participant (RM) International Participant
(USD)
REPLY FORM
FUNDAMENTALS OF PIPELINE ENGINEERING 2 6
January 2006 UTM City Campus, Kuala Lumpur,
MALAYSIA

• Method of Payments
• Please kindly complete and return the reply form
  together with
• Local Participants
• By cheque / Bank draft which are made payable
  to
• PHYTO BIZNET SDN BHD
• International Participants
• By Direct Transfer/Bank Draft
• CEPP Bank details Bumiputra Commerce Bank
  Berhad
• Universiti Teknologi Malaysia
• 81310 UTM Skudai, Johor, Malaysia
• Account No 0118-0004178-05-7
• Please instruct your bank to remit us the full
  amount, net of bank charges
• Cancellation Substitutions
• A full refund will be promptly made for all
  written cancellations 2 weeks before the meeting.
  50 refund will be made for written cancellations
  received 7 days before the meeting. A substitute
  may be made at any time.
• Note a) The organiser has the right to make
  any amendments that they deem to be in the best
  interest of the course and to cancel the course
  if insufficient registrations are received a week
  before course commencements date .
• B) CERTIFICATE OF ATTENDANCE will be awarded at
  the end of the course.
• Credit Transfer

YES ! I would like to register the following
participants
Name 1 Job Title Name 2 Job Title COMPANY
INFORMATION Company Address Town State Tel AUTHO
RISED Signatory (This registration is invalid
without signature form an authorised
officer) Name Job Title Tel
_____________________________________________ ____
_________________________________________ ________
_____________________________________ ____________
_________________________________
_____________________________________________ ____
_________________________________________ ________
_____________________________________ ____________
_________________________________ ________________
_____________________________ ____________________
_________________________
Fax
_____________________________________________ ____
_________________________________________ ________
_____________________________________
Fax
ENQUIRIES
CHEMICAL ENGINEERING PILOT PLANT, UNIVERSITI
TEKNOLOGI MALAYSIA
http//www.cepp.utm.my
BRANCH OFFICE
MAIN OFFICE
Jalan Semarak, 54100 Kuala Lumpur Tel [phone]
4358 / 2615 4406 Fax [phone] Attn
Mrs Nik Norhayati E-mail nikyati_at_utmkl.utm.m
y
81310 UTM Skudai, Johor Tel [phone]
Fax 607 - 5569706 Attn Mrs Zulia
E-mail zulia_at_cepp.utm.my