Election Inspector Training - PowerPoint PPT Presentation

1 / 31
About This Presentation
Title:

Election Inspector Training

Description:

Warn that you cannot vote for more candidates than the number stated in the ... Each voter must complete an Application to Vote as follows: ... – PowerPoint PPT presentation

Number of Views:59
Avg rating:3.0/5.0
Slides: 32
Provided by: MDOS
Category:

less

Transcript and Presenter's Notes

Title: Election Inspector Training


1
Election Inspector Training
  • Michigan Department of State
  • Bureau of Elections
  • Insight Optical Scan
  • Precinct Count Voting System

2
Introduction
  • This Power Point presentation has been prepared
    for election inspectors appointed to work in a
    precinct in which the Insight precinct count
    voting system is used
  • Included is a review of the laws, rules and
    procedures governing the operation of the polling
    place and the duties that must be carried out by
    the board of election inspectors on election day

3
Agenda
  • Opening the polls
  • Processing voters
  • Campaigning at the polls and exit pollsters
  • Challengers and poll watchers
  • Assisting voters cast ballots
  • Spoiled and exposed ballots/What Ifs
  • Voters who have moved
  • Missing registrations
  • Processing absentee ballots

4
Agenda (Continued)
  • Closing the polls (Precinct Canvass)
  • Reconciling total ballots cast vs total voters
  • Duplicating ballots
  • Preparing the Statements of Votes
  • Processing Write-in votes
  • Determining the validity of ballot markings
  • Ballot security

5
Opening the Polls
  • The following tasks must be performed prior to
    the opening of the polls
  • Take and sign the constitutional oath of office
  • Check all forms and supplies
  • Establish a barrier to separate the voting area
    from the public portion of the room

6
Opening the Polls (Continued)
  • Position voting stations and tabulator in voting
    area so as to ensure ballot secrecy
  • Inspect all three compartments of the ballot box
    -- Auxiliary (back), Write-In (front) and Main
    (middle)
  • Verify that the tabulator serial number and
    tabulator seal number agree with the Clerks
    Preparation Certificate (Do not remove the
    tabulator seal!)

7
(No Transcript)
8
Verify Tabulator Serial Number(Back of Tabulator)
9
Verify Tabulator Seal Number(Back of the
Tabulator)
10
Opening the Polls (Continued)
  • Unlock back compartment remove the power cord
    and plug into outlet
  • The red power light in the LCD display window
    will come on the following three tests will
    automatically print out Ballot Statistics
    Report, Acceptable Security ID Code and the Zero
    Report (Do not remove the tape!)
  • Proof the ballots against the Zero Report and
    Instruction ballot (NOTE All totals must be
    zero)

11
(No Transcript)
12
Opening the Polls (Continued)
  • All inspectors must sign the bottom of the tape
    and complete and sign the Election Inspectors
    Preparation Certificate
  • Verify that the precinct that appears on the
    LCD display is correct and that the public count
    reads zero throughout the election, the public
    count will increase by 1 for each ballot
    tabulated
  • The polls must be ready and open for voting at
    700 a.m.

13
Ready For Voters LCD Is 000
14
Opening the Polls (Continued)
  • Check and Balance Procedure The following
    duties must be handled by two inspectors of
    different party affiliations
  • Assisting voters after they have entered the
    voting booth
  • Opening the tabulator while the polls are open
  • Sealing ballot containers and the tabulator
  • Delivering documents and ballot containers after
    the close of the polls

15
Processing VotersOffer InstructionsTo All
Voters
16
Processing Voters (Continued)
  • If a partisan primary, remind voters that
    they cannot vote in more than one party column
    (Crossover or Split ticket voting is permitted in
    general elections only)
  • Never attempt to influence the voters choices
  • Offering Instruction
  • Always offer instructions on all aspects of the
    voting process including how to cast a write-in
    vote
  • Warn that you cannot vote for more candidates
    than the number stated in the office heading
    (Over vote)

17
Processing Voters (Continued)
  • Offering Instruction (Continued)
  • If the voter asks for additional instruction
    after entering the voting booth, two inspectors
    of different political party affiliations must
    provide the instruction
  • If the voter needs assistance with voting the
    ballot refer to Assisting Voters Cast Ballots

18
Processing Voters (Continued)
  • Each voter must complete an Application to Vote
    as follows
  • Signature - Any variation of the legal name is
    acceptable the printed name is optional
  • Present Street Address Not necessarily the
    registration address
  • Day and month of birth Year of birth is
    optional

19
(No Transcript)
20
Processing Voters (Continued)
  • Compare the day and month of birth and present
    residential address on the Application to Vote to
    the information on the QVF precinct list
  • If the day and month of birth does not agree
    attempt to ascertain the reason for the
    discrepancy
  • If the addresses are different refer to Voters
    Who Have Moved

21
Processing Voters (Continued)
  • Check to see if the voter was issued an absent
    voter ballot
  • If an absent voter ballot has been issued, the
    ballot must be surrendered write Canceled
    Voted in Person on the AV envelope and make a
    notation on the Remarks Page
  • If the voter is unable to surrender the absent
    voter ballot contact the clerk for instruction

22
Processing Voters (Continued)
  • Check the QVF list for the presence of other
    Status Codes Refer to QVF Notes for further
    explanations
  • Initial the Application to Vote to indicate that
    approval to vote has been granted
  • Note the voting activity on the QVF precinct list
    according to the clerks instructions

23
Processing Voters (Continued)
  • Issuing the ballot
  • Record the ballot number on the Application to
    Vote
  • Record the voters name and ballot number in the
    Poll Book on the first available line (never skip
    lines)
  • Place the ballot into a secrecy sleeve so that
    the stub is exposed and hand to voter

24
Processing Voters (Continued) A Secrecy
Sleeve Must Be Provided
With Every Ballot Issued
25
Processing Voters (Continued)
  • Preserving Ballot Secrecy
  • Inspectors must remain at least 10 feet away from
    the tabulator while the voter deposits his/her
    voted ballot
  • If the ballot is rejected, inspectors may not
    approach the tabulator until the rejected ballot
    has been concealed
  • Always refer to the script provided by the
    Bureau of Elections when explaining the reason(s)
    for rejection to a voter (A copy should be
    included in your precinct supplies)

26
Processing Voters (Continued)
  • Receiving the voted ballot
  • To ensure ballot secrecy, the ballot must be
    inserted in the secrecy sleeve with the stub
    exposed
  • Verify the number on the ballot stub against the
    ballot number recorded on the Application to Vote
    or Poll Book
  • Remove the ballot stub and instruct the voter to
    feed the ballot into the tabulator
  • If the tabulator returns the ballot refer to
    What Ifs

27
Campaigning at Polls
  • Campaigning must be at least 100 feet from any
    entrance to the building being used by voters
  • Inspectors have the right to ask voters to remove
    campaign buttons and conceal literature or
    clothing bearing campaign information

28
Campaigning at Polls (Continued)
  • Vehicles bearing campaign information may park
    within 100 feet only while the driver and
    passengers are voting
  • Repeat violations must be reported to the clerk
    or local law enforcement

29
Exit Pollsters
  • Exit pollsters are persons employed to survey
    electors after they have voted
  • Pollsters must remain at least 20 feet away from
    the exterior exits used by voters
  • Pollsters may not enter the building
  • Pollsters may not question persons entering the
    building

30
Challengers
  • Challengers are appointed by political parties
    and interest groups challengers may
  • Observe the processing of voters and ballots from
    inside the processing area
  • Visually examine all equipment, forms and records
  • Challenge a persons qualifications to vote
  • Challenge the actions of election inspectors
  • Serve in more than one precinct (no more than two
    per precinct per political party or group)

31
Challengers (Continued)
  • Challengers must
  • Possess and display to the chairperson or
    inspector upon entering the polls, a challenger
    card issued by the party or group that they
    represent
  • Conduct themselves in an orderly manner and may
    not touch any election materials or equipment
  • Not campaign or display campaign materials
Write a Comment
User Comments (0)
About PowerShow.com