Belt Sanders - PowerPoint PPT Presentation

1 / 12
About This Presentation
Title:

Belt Sanders

Description:

... may catch their hands, clothing, or jewelry in the in ... Do not wear loose clothing or jewelry that could get caught in sanding belt. Belt Sanders - PPE ... – PowerPoint PPT presentation

Number of Views:419
Avg rating:3.0/5.0
Slides: 13
Provided by: hin3
Category:
Tags: belt | clothing | sanders

less

Transcript and Presenter's Notes

Title: Belt Sanders


1

Belt Sanders
2
Belt Sanders - Concerns
  • Sanders produce a considerable quantity of fine
    wood dust.
  • The primary safety hazard of handheld belt
    sanders is that workers may catch their hands,
    clothing, or jewelry in the in-running rolls.

3
Belt Sanders - Concerns
  • Contact with an abrasive surface can cause
    abrasions and lacerations.
  • Frayed or worn belts can cause wood splinters and
    chips to launch away from the work area

4
OSHA - 1926.300
  • (a) Condition of tools. All hand and power tools
    and similar equipment, whether furnished by the
    employer or the employee, shall be maintained in
    a safe condition.
  • (d)(2) All handheld poweredbelt sandersshall be
    equipped with a momentary contact "on-off"
    control and may have a lock-on control provided
    that turnoff can be accomplished by a single
    motion of the same finger or fingers that turn it
    on.

5
OSHA - 1926.302
  • (a)(1) Electric power operated tools shall either
    be of the approved double-insulated type or
    grounded in accordance with Subpart K of this
    part.
  • (a)(2) The use of electric cords for hoisting or
    lowering tools shall not be permitted.

6
Belt Sanders - What TO Do
  • Install sanding belts that are the same widths as
    the pulley drum.
  • Use two hands to operate sanders - one on a
    trigger switch and the other on a front handle
    knob.
  • Keep all cords clear of sanding area during use.
  • Clean dust from the motor and vents at regular
    intervals.

7
Belt Sanders - What NOT to Do
  • Do not work on material that is not securely in
    place.
  • Do not cover the air vents of the sander.
  • Do not wear loose clothing or jewelry that could
    get caught in sanding belt

8
Belt Sanders - PPE
  • Wear safety glasses or a face shield
  • Wear a respirator for large amounts of dust
  • Wear hearing protection if volume is an issue

9
Belt Sanders Common Sense
  • Ensure that power is OFF before plugging the unit
    in
  • Unplug the sander before changing the belt or
    emptying the dust collector
  • Keep hands away from the belt

That was aclose call!
10
(No Transcript)
11
(No Transcript)
12
The True Purpose of Belt Sanders Belt Sander
Racing
http//www.beltsanderracing.net/
http//www.nebsra.org/
Write a Comment
User Comments (0)
About PowerShow.com