Title: Selecting a seal flush piping plan for your single mechanical seal
1LEAK-PACK
- Leak-Pack Brand Mechanical Seals and Sealing
Components are serving the various types of
industries such as Dyes Chemicals, Petro
Chemicals, Fertilizers, Oil Natural Gases,
Solvent Extractions, Paper, Steel, Power
Generations, Drugs Pharmaceuticals, Food
Processing, Textile, Cement, Sugar, Water
Treatments, Soap and many of the processing
industries.
2SELECTING A SEAL FLUSH PIPING PLAN FOR YOUR
SINGLE MECHANICAL SEAL
3- A mechanical seal requires frequent repair and
replacement. - It is a costly thing.
- Therefore, it is important to follow some
principles to choose the best seal flush plan for
the single mechanical seal. - It allows the seal to operate in an environment
that ensures optimal seal life without increasing
cost from dilution of product or use of water. - This blog brings different flush piping plans and
how to choose the right one among them.
41 NO FLUSH PLAN
You can choose no flush plan in the following
conditions
- When the pump fluid is clean
- The fluid maintains temperature within the
maximum and minimum limits of the seal - The fluid is compatible with the components of
the seal - When there is no risk of solidifying or
vaporizing of the fluid due to the friction heat
If this plan is used, then the chamber must be
either tapered or self-venting.
52 BYPASS FLUSH PLAN
If you want to choose the Bypass flush plan, then
make sure these conditions are fulfilled
- The fluid is compatible with the components of
the seal - The fluid contains solid that can put an adverse
effect on the seal - The temperature of the pumped fluid goes beyond
the maximum temperature of the seal
In this method, piping runs from the point of
pump discharge to the point where the flush
connects to the seal gland. Thus, the fluid gets
a flow, it passes through the seal and goes back
into the pump via the chamber throat of the seal.
6- Alternatively, the fluid can be directed back to
the pump section from the flush connection on the
seal gland. It results in an opposite flow. The
operating pressure at the seal drops by this
method. - To make the process easy, sometimes, heat
exchanger or pressure reducing orifice are
installed along in the piping. - In the bypass flush method, the heat generated by
the seal flows past the seal face. Hence, the
operating temperature gets stabilized at the
temperature of the fluid that is being pumped. - The bypass flush method is reliable and simple.
It is cost-effective as well. There is no
dilution of the product in this method. - It is a preferred method.
73 EXTERNAL FLUSH
- It is useful when you want the isolation of the
seal from the fluid. Here, water is injected into
the seal gland flush with pressure. Water flows
past the seal and mixes with the fluid. TO
control the flush water flow, lip seal or
restriction bushing is used. To measure the flow,
flow meter, gauge, and control valves are used. - Leak-Pack is ISO 90012008 certified
company and leading mechanical seals manufacturer
supplier in India, providing solutions to all
types of leakages by manufacturing Mechanical
Seals and Sealing Components as per customers
drawings, samples or requirements.
8Thanks
- Do you have any questions?
- info_at_leakpack.com
- 91 7069871592
- https//leakpack.com/
- Please keep this slide for attribution