Five Ways to Maintain your Laser Machine

1
sales_at_altparts.com
Five Ways to Maintain your Laser Machine
Laser machines are present in every industry
today. Everywhere today we see, there is a lot
of buzz about it. People are using it to create
magical equipment, designing and engraving
wonderful things.
www.altparts.com
2
sales_at_altparts.com
Fabricators spend thousands of dollars purchasing
laser machines and maintain them. You need to
keep them up and running all the time as
customers can require things at any time. By the
end of the day, it becomes very difficult to
handle everything on your own and at minimal
expense. Maintaining machines is one of the major
issues many fabricators face like oiling them
regularly, replacing its parts like fanuc parts,
fanuc spare parts and many others . But,
maintenance is essential so that you can deliver
quality products to your customers. You might be
thinking how you can do it efficiently. Here, in
this article, we will discuss some of the ways
you can efficiently maintain your machines and
keep them up and running. If you dont maintain
a machine then the light from the laser passes
through an optical window to reach the workpiece.
If the window is not clean properly then the
light beam may defect and lose the majority of
properties. To avoid this situation, we need to
maintain our laser machines. Maintaining also
includes replacing laser machines parts with
high-quality Fanuc parts and Fanuc spare parts.
www.altparts.com
3
sales_at_altparts.com
Now, let's first understand why you need to
maintain a laser machine? The efficiency of
laser cutting machines depends largely on how
well you are maintaining it. Your machine might
be under service contract and 24-hour technical
support, it is always a smart move to follow
these simple steps to clean and ensure there are
no delays on deliveries or tempers frayed. Timely
maintenance of laser machines helps you to ensure
longevity and saves you money. It's not a tough
job. Without further ado, let's get started with
the tips for maintaining laser machines 1)
Cleaning External Parts First Maintaining and
cleaning the external parts of your machine
tasks hardly 5 minutes a day. Insulated housing
protects the brain of the machine i.e. control
board and other electronics parts. The internal
parts do not need user intervention. Everyday
maintenance of machines reduces by extraction or
exhaust system. Routine checkups are limited to
external cleaning of engraving areas, mirrors,
and fume extraction outlets.
www.altparts.com
4
sales_at_altparts.com

• Wipe Lenses
• Before any operation and after 8 hours of laser
  operation, make sure to visually inspect all
  optic lenses. This means keep an eye on all
  three mirrors and focus lenses of your machine.
  Check smudges, debris, or any kind of residual
  grime.
• Wipe the mentioned things with non-alcoholic
  liquid which you receive while you purchase the
  laser machine. Remember a clean machine gives
  you better results. Accumulation of unwanted
  particles created scratches and damage the lens,
  mirror, and overall degradation in the quality of
  desired product.
• Proper Oiling
• Any machine needs proper oiling to work smoothly.
  Remember lubricants are key to maintenance in
  any machine. Over time, of course, laser
  machines and its parts like Fanuc parts, Fanuc
  spare parts, and many others suffer from
  corrosion. If you dont use proper oil then the
  laser path gets affected.
• Move the slider back and forth to apply oil
  evenly on all surfaces. Lubricate each and every
  part properly as it helps to reduce friction and
  wearing out. It can prevent rust and

www.altparts.com
5
sales_at_altparts.com

• lockups. When the parts are moving with clean
  lubricant then it puts less stress on the motor
  and therefore extends its life.
• Renew the Cycle
• Laser engraving machines are recycled using
  distilled water which acts as a coolant for
  laser beams. If you use it for a long time then
  it leads to contamination of the tube.
• After using for 2 to 3 weeks, remove water and
  add a new stream of distilled water. Water tank
  cleaning is important for a machine's long life.
  Be sure to check and ensure tightness on those
  joints to avoid leaks. This way the laser tube
  will perform in better conditions.
• Take Advice from Experts
• If you are ever stuck in something or with some
  mechanical problem, rather than solving on your
  own contact your companys technical staff. I am
  sure they will help you solve the issue. The
  reason behind not doing it on your own is there
  are chances you might do some mistake which can
  lead to machine failure.

www.altparts.com
6
sales_at_altparts.com
Final Words Always make sure to maintain your
machines properly as it results in having proper
product output. We all know the consequences of
not maintaining them properly. Efficient working
of your machines plays an important role to
satisfy your customers requirements and grow
your business. This Article Post is Originally
Posted here https//www.sooperarticles.com/busin
ess-articles/manufactu ring-articles/five-ways-mai
ntain-your-laser-machine-1781820. html
www.altparts.com