Telephone Line Surge Protector: Cost Effective Solution with Growing Industrialization

1
Telephone Line Surge Protector Cost Effective
Solution with Growing Industrialization

• In this era, we are surrounded by machines
  everywhere whether it is business or homes. The
  economic growth of any state or region is
  completely depending upon its industries which
  are growing day by day. It is very obvious that
  we confront several disorders like machine
  burnout, short circuit etc in these machines
  which will hamper our normal work, production
  cycle and profitability ratio. After several
  studies we come to know that the most ceaseless
  reason behind the gadgets to get harmed is Surge.
  Surges are over voltage spikes which last for 3
  nano seconds. These power surges can destroy your
  electrical and electronic equipments in a very
  short period of time which is typically unnoticed
  by you. To ensure safety of your valuable and
  delicate equipments, a surge protector is your
  best line of defense.
• In addition to various power supply lines,
  telephone lines are the most important lines
  especially for call centers and offices.
  Telecommunication line networks are dispersed
  over some kilometers. Therefore, they are highly
  vulnerable to surges. Here, we have a robust
  solution which offers additional layer of
  protection to the network. It is made by
  complying IEC 61643-21 standard along with EN
  50173-1 and offers a degree of protection IP 20.

2
RJ 11 Telephone Line Surge Protector

• It is a highly efficient SPD which is
  convenient to offer high end protection to DDN,
  modem, fax, telephone from any kind of shock
  caused by the lightning or high voltage
  transients. When the lightning hits the surface
  of earth, the ground potential rise up which
  travel through the internal connections inside
  the telephone and can destroy at the same moment.
  Its nominal voltage is 180V DC and maximum
  continuous operating voltage is 200 V DC.

3
MDF Surge Protector

• These surge arrestors are designed to protect
  telephones connected to the telecom network
  through MDF equipped with connecting strip. Its
  nominal voltage is 24 V DC and maximum continuous
  operating voltage is 180 V DC. The response time
  must be less than 25 ns.

4
Network Switch Surge Protector

• This arrestor is designed to protect
  mainly TCP/IP communication network and signal
  lines. Its maximum continuous operating voltage
  is 7 V and maximum discharge surge current is
  10kA. The response time must be less than 10 ns.