How To Find The Right Projector Lamps

1
(No Transcript)
2
At the same time the bulb should be fixed loosely
as spark may be produced on the terminal, making
excessive load on the ballast which may lead to
breakdown of the lamp.
projector lamps
3
The procedure for replacing the projector lamp
may vary based on the manufacturer. Hence the
instruction manual should be used and followed
carefully to replace the projector lamp whenever
necessary. In the instruction manual the set by
step procedure will be given to replace the new
lamp in the module.
projector lamps
4
While cleaning the projector a proper cloth
should be used for cleaning and especially while
cleaning or handling the lamp, all the time a
proper cloth should be used. When you clean a
lamp with your hand the fingerprints from your
fingers will get imprinted in the bulb which may
cause hot spots on the surface on the lamp,
leading to early failure of the lamp.
projector lamps
5
Contact Us
MARY STREET, GAWLER EAST SA 5118 Phone- (08)
8223 3448 kickstartcomputers322_at_gmail.com www.ki
ckstartcomputers.com.au
projector lamps
6
projector lamps