Adv Physics - PowerPoint PPT Presentation

1 / 19
About This Presentation
Title:

Adv Physics

Description:

Frequency at which an object will vibrate if disturbed. ex ... 1989 California earthquake and overpass - foot soldiers break step at bridges. Standing Wave ... – PowerPoint PPT presentation

Number of Views:50
Avg rating:3.0/5.0
Slides: 20
Provided by: KMYO
Category:
Tags: adv | overpass | physics

less

Transcript and Presenter's Notes

Title: Adv Physics


1
Adv Physics
  • Chapter 14
  • Sections 2 3

2
Natural Frequency
  • Frequency at which an object will vibrate if
    disturbed
  • ex every pendulum has a T of vibration
  • (if you change the length the T
  • changes)
  • - every time you strike a 260 Hz tuning
  • fork it vibrates at 260 Hz

3
Forced Vibration
  • Object is forced to vibrate at a particular
    frequency due to an outside force
  • ex can force a swing to oscillate at any
  • frequency you want if you hold it
  • - if you hold a 330 Hz tuning fork
  • against a desk the desk vibrates at
  • 330 Hz

4
Resonance
  • Dramatic increase in the amplitude of a vibration
    when the frequency of the outside force matches
    the natural frequency of the object
  • ex if time pushes on a swing its
  • amplitude increases
  • - Tacoma Narrows Bridge
  • - 1989 California earthquake and overpass
  • - foot soldiers break step at bridges

5
Standing Wave
  • Wave that appears to oscillate but not travel as
    a result of interference between a wave and its
    reflection
  • - if sent and reflected wave are in phase you
    get constructive interference and a wave pattern
  • - if sent and reflected wave are out of phase
    you get destructive interference and no wave
    pattern

6
(No Transcript)
7
Standing Waves on a String
  • Only certain frequencies produce standing waves
  • fn n ( v/2L ) where n 1,2,3,.
  • v speed of wave f - frequency
  • L length of string n harmonic

8
(No Transcript)
9
Standing Waves in Open Tube
  • Frequencies that produce standing waves in an
    open ended pipe are given by
  • fn n ( v/2L ) where n 1,2,3,.
  • v speed of wave f - frequency
  • L length of pipe n harmonic

10
(No Transcript)
11
Standing Wave in Closed Pipe
  • Frequencies that produce standing waves in a pipe
    closed at one end are given by
  • fn n ( v/4L ) where n 1,3,5,.
  • v speed of wave f - frequency
  • L length of pipe n harmonic

12
Sample Problem
  • The speed of a wave on the heaviest string of an
    electric guitar is 207 m/s when it is stretched
    to a tension of 226 N. This string produces the
    musical note E when vibrating along its entire
    length in a standing wave at the fundamental
    frequency of 164.8 Hz. A) Find the length of
    the string. B) A guitar player wants the string
    to vibrate at a fundamental frequency of 329.6
    Hz, as it must if the musical note E is to be
    sounded one octave higher in pitch. To
    accomplish this, he presses the string against
    the proper fret and then plucks the string. Find
    the new length of the string.

13
Sample Problem
  • When all the holes are closed on a standard
    flute, the lowest note it can sound is a middle
    C, whose fundamental frequency is 261.6 Hz. A)
    The air temperature is 20 C and the speed of
    sound is 343 m/s. Assuming the flute is a
    cylindrical tube open at both ends, determine the
    length of the tube. B) A flautist can alter the
    length of the flute by adjusting the extent to
    which the head joint is inserted into the main
    stem of the instrument. If the air temperature
    rises to 32 C, to what length must a flute be
    adjusted to play a middle C?

14
Sample Problem
  • The E string on a guitar has a length of 66 cm.
    The strings fundamental frequency is 165 Hz.
    Pressing the string against one of the frets
    along the neck of the guitar effectively shortens
    the length of the string. What length will give
    the E string a frequency of 262 Hz (middle C)?

15
Sample Problem
  • Given that most people cannot hear sounds
    outside the frequency range 50 Hz to 10000 Hz,
    what are reasonable minimum and maximum lengths
    for musical wind instruments, which are open at
    both ends?

16
(No Transcript)
17
Timbre
  • Distinctive quality of a sound that is the result
    of the mixture of harmonics of varying intensity

18
(No Transcript)
19
Beats
  • Repetitive variation in loudness heard when 2
    waves of slightly different frequencies interfere
    constructively and destructively
  • Beat frequency number of loud/soft repetitions
    per second
  • fB f1 f2
  • - humans can hear fB less than or equal to 10 Hz
Write a Comment
User Comments (0)
About PowerShow.com