Introduction%20of%20Yutong%20Group - PowerPoint PPT Presentation

View by Category
About This Presentation
Title:

Introduction%20of%20Yutong%20Group

Description:

Introduction of Yutong Group Zhengzhou Yutong Group Co. LTD. 2010/05/05 * * Content Part.01 General description on the enterprise Part.02 Vision Part.03 Demonstration ... – PowerPoint PPT presentation

Number of Views:37
Avg rating:3.0/5.0
Slides: 50
Provided by: servi123
Learn more at: http://www.service-tc.ru
Category:

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: Introduction%20of%20Yutong%20Group


1
Introduction of Yutong Group
Zhengzhou Yutong Group Co. LTD.
2010/05/05
2
Yutong, the leader of Chinas bus industry
A dedicated bus manufacturer deserving your
trust The number one in market shares in Chinas
bus industry The number one in brand value in
Chinas bus industry
3
Content
Part.01 General description on the enterprise
Part.02 Vision Part.03 Demonstration of
strength Part.04 Brief introduction on
products Part.05 Corporate Social Responsibility
3
4
Brief introduction on Yutong
  • Global largest complete bus manufacturer
  • World largest bus manufacture base
  • Bus production line supported by concurrent
    European techniques
  • The sales amount breaks through 15 billion RMB.
  • The production and sales volumes of large-sized
    and middle-sized buses reach to 28186 to secure
    the number one position in China with the market
    shares as high as 25.
  • Its overseas market has covered six strategic
    areas in the world.

4
5
In the 1990s, Yutong started its modern rise with
amazing speed
Acquired ISO/TS169492002 certification
New chassis production line completed
Transformed into a joint-stock company
New Plant at Shibalihe put into use
Acquired Exemption of Inspection for Export
certification
Listed in Shanghai Stock Exchange (SSE)
Electrocoating line put into use, largest in the
world
Established JV with MAN Nutzfahrzeuge
Order of 5348 units to Cuba finalized
Delivered a milestone of 20,000 units buses
5
6
In 1993, the bus sales volume of Yutong Company
was 700 at system transformation, while in 2008,
the sales volume of Yutong Group soars to 28186,
with an annual compound growth ratio higher than
29.
6
7
In 2009, the bus sales volume of Yutong reaches
28186, being No.1 in Chinas bus industry.
Ranking in China
Sources http//www.chinabus.info/
7
8
In 2009, the sales volume of Yutong large-sized
and middle-sized buses occupied the second place
in the world bus industry.
International ranking
Sources Annual reports, China Bus Statistics
8
9
Yutong, along with other major suppliers, are
honored to be part of the public transportation
solution.
Global Presence of Yutong Bus
9
10
Honors Awards
The most valuable brand in Chinas bus industry
BAAV Coach Builder of the Year BAAV Luxury Tour
Bus Builder of the Year BAAV Coach Appearance
Award of the Year Complete Bus Builder Export
Marketing Award of the Year Exclusive
Large-sized Coach Supplier for Asian Cup
2004 China Domestic Automobile Industry Export
Base First Certificate for Exemption from
Inspection of Import Export
Commodities in Auto Industry
10
11
Content
Part.01 General description on the enterprise
Part.02 Vision Part.03 Demonstration of
strength Part.04 Brief introduction on
products Part.05 Corporate Social Responsibility
11
12
Our Mission
help customers succeed
Mission
Position
Responsible and long-term business partner
Business
Timely deliver tailored products and trusted
service
12
13
Content
Part.01 General description on the enterprise
Part.02 Vision Part.03 Demonstration of
strength Part.04 Brief introduction on
products Part.05 Corporate Social Responsibility
13
14
RD
State-level RD Centre was established in 2004,
innovating bus coach industry ever since.
Fuel efficiency
Engine compartment heat management
Ergonomics
Noise
RD Centre
Drivability
Interior noise
Maneuverability
Vibration
Air-conditioning
14
15
RD
CAE study on bus body
CATIA software
CAE
To precisely analyze the framework bearing
performance and reinforce the body structure in a
scientific way .
15
16
RD
Simulation Test on Whole Vehicle under
Intensified Real Road condition
Hollow Place
Sand Road
Left Collected Real Road Chart Right BMW and
Yutong in Test
Project Target To guarantee the reliability of
the whole vehicle in 1,000,000km with reliability
test within 1,000,000Km. (World-only vibration
test stand for buses) Industry Not available in
any other company, which can only make a
30,000-km road test in the test ground, leaving
the majority of problems to be checked later in
the market. The test criterion of Yutong demands
an intensification of dozens of times more than
the road test in the test ground.
16
16
17
RD
Fatigue and Durability Test of Parts and
Components
Project Target To solve different chassis
assembly problems such as noise, fatigue and
vibration resistance. 6-freedom multi-spindle
vibration stand can realize the 6-way-freedom
vibration test, pure vibration test and also the
simulated road test. The stand can simulate
various movements like up-down jumping,
horizontal movement, pitching, side-tipping and
lateral swing.
Cooling System Test
Fuel Tank Assembly Test
Engine Suspension Test
17
18
RD
Fatigue and Durability Test Stand for
Transmission System
Project Target To test fatigue and durability of
clutch, gear box, drive shaft and rear axle This
is an electric-lock test stand, which can
simulate engine torture fluctuation and the real
drive. Its mainly used to measure and position
the noise of the transmission system to measure
the operation performance of the gear box and the
clutch and, by imitating the real road
condition, to test the stress state of the
components of the transmission system, so as to
make the matching test of the vehicle power.
18
19
RD
Parts and Components Reliability Test Stand
Project Target To solve reliability problems of
key components Performance and fatigue test shall
be mainly carried out for suspension components,
steering components, seats and body parts.
Industry No such equipment and no such test in
any other company
Seat transfer performance test
Leaf spring fatigue test
Seat basin test
Steering column fatigue test
????????
19
20
RD
Ergonomics
The three-dimensional man-machine engineering
research model has been applied to provide easier
control and more concentrated and comfortable
driving for the driver. The vehicle performance
is improved from the drivers perspective.
20
21
RD
Seat impact test
The seat impact tests have been conducted in
foreign countries to improve the materials
structure and layout, so as to reduce the
injuries caused by the seat during collision and
to guarantee the passengers safety, which has
largely improved the passive safety.
21
22
Techniques Welding
Welding is made based on the European standard
European Welder Work License
Smooth and Even Welding seam
22
23
Techniques electrophoresis
We cooperates with world-class partners to
build-up our electrophoresis production line.
Latest
Open in 2009, while most bus electrophoresis
lines are 20 years old.
Largest
24 Coating pools for both chassis and body, takt
time is 6-9 minutes,annual production capacity
33000
Best
Combined latest world technologies, complete
automatic process, world class suppliers
23
24
Techniques electrophoresis
Traditional coating is subject to sever corrosion
in salty/sunny/wet conditions, especially in case
of surface distress.
Salt Spray Test Results
8 years anti-rust guarantee , For body and chassis
24
25
Techniques Electric Components
Sensor Sensors for oil pressure, water
temperature and air pressure are of German Simens
VDO, the same configurations as that of European
top-grade buses like Benz and MAN. Relay
Panasonic relay, which are widely used in
commercial vehicles in Europe and America Water
Proof Connectors To avoid the electric
components failure caused by the water seepage
through the exposed connectors, high-quality
connectors like AMP are employed.
25
26
Quality Control Testing
26
27
Quality Control Testing
Yutong has its own test ground, and all buses
shall be tested strictly before leaving the
factory so as to reduce the fault rate and
improve the adaptability.
Integrated Test Road
Analogue Stone Road
Analogue Wave Road
27
28
Quality Control Testing
Roll-over Test
42
Yutong Test Result
36
National Standard
28
29
Quality Control Testing
Complete bus rain-shower lab
Provided with dual-passage automatic showering
equipment During showering, the blower can be
started to sufficiently simulate the showering
effects in natural environment to ensure the
reliability of rain-shower inspection.
29
30
Quality System
Yutong has passed internationally recognized
ISO/TS16949 quality system, demonstrating the
powerful strength of Yutong bus to create values
for you.
30
31
Content
Part.01 General description on the enterprise
Part.02 Vision Part.03 Demonstration of
strength Part.04 Brief introduction on
products Part.05 Corporate Social Responsibility
31
32
Coach
32
33
City Bus
33
34
Content
Part.01 General description on the enterprise
Part.02 Vision Part.03 Demonstration of
strength Part.04 Brief introduction on
products Part.05 Corporate Social Responsibility
34
35
Contributions to Community
Donations
35
36
Annex
36
37
BAAV BUSWORLD ASIA 2010
Grand BAAV Award BRT Bus-ZK6180MGQA9
BAAV Environment Award Bus-ZK6125H2EV
37
38
Shanghai EXPO 2010
Model of Yutong bus is displayed in the UITP
Pavilion.
UITP (Union Internationale des Transports
Publics) is one of the players of International
Organizations Pavilion at Shanghai EXPO 2010.
38
39
Beijing Olympic Games 2008
Yutong shuttle bus for the journalists of the
Main Press Center (MPC) in Olympic Games 2008.
Shuttle bus of UPS and OMEGA, partner and sponsor
of Beijing Olympic Games, equipped by Yutong.
39
40
Russia
40
41
Middle East
41
42
America
42
43
Middle East
43
44
Africa
44
45
Training
45
46
Training
46
47
KD, Cuba
47
48
KD,IRAN
48
49
??? Thank you.
About PowerShow.com