KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information

1
NS1000 Version 2Document for SE and Sales
Training
KX-NS8188 E1 AdapterKX-NS8290 PRI
AdapterProduct Information
Rev 1.1E January 09, 2013
Panasonic System NetworksPBX SE team
Specifications and schedule are subject to change
without notice.
2
1. Introduction
When customers want to use IP-Phone () mainly
for extension and they want to use E1 or more
than 2 PRI as trunk, KX-NS1000 version 2 with new
trunk adapter is recommended because KX-NS1000
supports more IP capacity and IP functionality
than KX-NCP or KX-TDE.()- KX-NT / KX-UT by
Panasonic- NT based software phone by
Panasonic- SIP hardware phone by other maker-
SIP software phone for PC, Android, iPhone and so
on
PanasonicKX-NS8290
PRI30
SIP Extension
PRI30
Model Specifications
KX-NS8188X E1 adapter on SIP trunk
KX-NS8290CE PRI30 adapter on SIP trunk
KX-NS8290X PRI23 adapter on SIP trunk
SIP Trunk (30-ch)
KX-NS1000
PRI Card
KX-NCS0290
215 mm (W)44 mm (H)200 mm (D) 500g
SIPSoftphone
OtherSIP Phone
KX-NT
KX-UT
3
Stacking Card
2. Introduction
On the other hand, when customer has Panasonic
PBX now, they can add IP capacity and IP
functionality using KX-NS1000 version 2 with
stacking card KX-NS0130 with keeping current
PBX.This configuration is useful for new
customer also whenthey need more SLT phone,
Digital PT with DSS Console,Analog PT and analog
CO as well as IP-Phone.
KX-NS0130 SC card for NS100
KX-NS0131 SC card for NCP
KX-NS0132 SC card for TDA/TDE
Before adding KX-NS1000
After adding KX-NS1000
AnalogCO
AnalogCO
Direct Connectionlike TDE600 to TDE620
KX-TDE
KX-TDE
KX-NS1000
CO Card
CO Card
SC Card
SC Card
MPR Card
EXT Card
EXT Card
KX-NCS0130
100 FeatureTransparencylike TDE600to TDE620
SIPSoftphone
OtherSIP Phone
KX-NT
KX-UT
SLT
KX-DT w/DSS Console
KX-DT w/DSS Console
SLT
4
3. Table of Contents
Chapter Explanation
1 Overview
2 Specifications
3 Concept of programming for Public mode
4 Step by step programming for the trunk adapter
5 Step by step programming for KX-NS1000
6 Programming hint for Private mode (QSIG)
7 Demonstration guide
5
Chapter 1Overview
6
11. Trunk Adapter for E1 / PRI
Panasonic KX-NS8290 increases PRI capacity.
KX-NS8188 for E1.
One PRI by card
Two PRI by card and adapter
PanasonicKX-NS8290
PRI30
SIP Extension
PRI30
PRI30
SIP Trunk (30-ch)
KX-NS1000
KX-NS1000
PRI Card
IP Trunk AK
PRI Card
KX-NCS0290
KX-NCS0290
OtherSIP Phone
SIPSoftphone
OtherSIP Phone
SIPSoftphone
KX-UT
KX-NT
KX-UT
KX-NT
Activation key of IP Trunk is NOT required in
KX-NS1000 to connectPRI / E1 trunk adapter, even
if SIP Trunk of KX-NS1000 is used.
7
12. Trunk Adapter for E1 / PRI - Capacity
Maximum 256 ch is available for E1 / PRI by
adapter and IP trunk.
Line Line Line NS1000x 1 NS1000x 2 NS1000x 3 NS1000x 4 or more
Trunk Trunk Trunk 256 256 x 2 600 600
Legacy Legacy 256 256 x 2 600 600
IP incl E1/PRI adapter IP incl E1/PRI adapter 256 256 256 256
SIP 256 256 256 256
H.323 48 48 x 2 96 48 x 2 96 48 x 2 96
Also useful to provide PRI/E1 with 2-ch Analog CO
or 4 BRI.
PRI30E1
PRI30 E1
SIPProvider
PRI30E1
PRI30
SIP Trunk(30-ch)
SIP Trunk(30-ch)
SIP Trunk(xx-ch)
256ch
AnalogCO
SIP Trunk (30-ch)
PRI Card
CO Card
Max. 256ch can be registered to SIP provider or
the adapter.
8
Reference
13. TDE as Option by H.323
KX-TDE with CO card increases CO capacity using
H.323.
More Analog CO by TDE (H.323)
AnalogCO
EnhancedQSIG AK
EnhancedFeature AK
KX-TDE
IP Trunk AK
CO Card
H.323
IP Trunk AK
MPR Cardw/ VoIP DSP
Stacking card isnot required in this case.
SC Card
OtherSIP Phone
SIPSoftphone
KX-UT
KX-NT
Activation key of IP Trunk is required in
KX-NS1000 for H.323 all channels and required in
KX-TDE for more than 4 or 16 channels.Activation
key for Enhanced QSIG is not required because
this configuration needs only basic QSIG
function.
9
Reference
14. TDE as Option by H.323 - Capacity
Maximum 96 ch is available for Analog CO / BRI
and H.323.
Line Line Line NS1000x 1 NS1000x 2 NS1000x 3 NS1000x 4 or more
Trunk Trunk Trunk 256 256 x 2 600 600
Legacy Legacy 256 256 x 2 600 600
IP incl E1/PRI adapter IP incl E1/PRI adapter 256 256 256 256
SIP 256 256 256 256
H.323incl Analog CO by TDE 48 48 x 2 96 48 x 2 96 48 x 2 96
Branch
HQ
PRI30
AnalogCO
AnalogCO
KX-TDE
H.323 SIP Trunk(256 ch)
H.323(32 ch)
KX-NS1000
CO Card
KX-NCP
CO Card
H.323(96 ch)
MPR Cardw/ VoIP DSP
H.323(32 ch)
CO Card
Max. 96ch can be used for any other PBX. (Chanel
is occupied only when call is made. )
10
Stacking Card
15. Stacking Card
Stacking Card increases DPT SLT Trunk
capacity.
100 FeatureTransparencylike TDE600 to TDE620
More Analog CO and DPT / SLT by Stacking
Card
AnalogCO
Direct Connectionlike TDE600 to TDE620
KX-TDE
KX-NS1000
CO Card
SC Card
SC Card
EXT Card
OtherSIP Phone
SIPSoftphone
KX-UT
KX-NT
KX-DT
SLT
This configuration is useful if customer needs
DPT with DSS Console and so on.- SC card for
TDE-NCP is installed instead of MPR card.- SC
card for NS1000 is installed to free slot. (Slot
for PRI2SLT etc )
11
Stacking Card
16-1. Stacking Card - Specifications
SpecificationsYou can connect a maximum of 2
existing PBXs for one KX-NS1000. A maximum of 8
existing PBXs and 16 KX-NS1000 can be connected
for the entire One-look Network. An existing PBX
refers to a Panasonic KX-TDE series, KX-NCP
series, or KX-TDA100/200/600/620 PBX.
KX-TDE620
SC Card
SC Card
KX-TDE600
KX-TDE620
KX-TDE600
KX-NCP
KX-NCP
SC Card
SC Card
SC Card
QSIG
Max. 8 PBXs
KX-DT
KX-DT
KX-DT
KX-DT
KX-DT
KX-DT
Different PBX category cannot be mixed to one
KX-NS1000. Category 1 KX-NCP500-1000
Category 2 KX-TDE(A)100-200 Category 3
KX-TDE(A)600-620Stacking card for KX-TDA100D is
not planned currently.
NCP500TDE200 N/ATDE100TDA200
OKTDE600TDE620 OKTDE620TDE620 OK
12
Stacking Card
16-2. Stacking Card - Conditions
Conditions- Cards in right table are not
supported. Reason is as follows. - MPR is
not required. - IP feature is supported by
KX-NS1000. - DISA/SVM feature is supported by
KX-NS1000 without AK. - New cards for
TDE-NCP version 5 are N/A. - By above condition,
KX-NT400 and KX-HGT100 cannot be used after
connecting with KX-NS1000.- IP capacity AK is
not required for trunk and extension in
existing PBXs because these are not IP. -
Other AK such as CA is required in KX-NS1000 for
extension in existing PBX.- In case of
TDA100/200 and TDE100/200 OPB3 card with ECHO16
must be installed in only Slot 1. ) Other
cards except OPB3 or OPB3 card with other
daughter board except ECHO16 can be
installed to any slot.
Not Supported Not Supported
Symbol Model
RMT TDA0196
MEC TDA0105/ TDE0105
DSP4 NCP1104
DSP16 TDE0110
DSP64 TDE0111
CTI-LINK TDA0410
IP-EXT16 TDA0470
IP-GW4E TDA0484
IP-GW16 TDA0490
IP GW4 TDA0480
MSG4 TDA0191
ESVM2 TDA0192
ESVM4 TDA0194
CLCOT8 TDA1180
CLCOT8E TDA1186
MCSLC24 TDA1178
MCSLC16 TDA1176
13
Stacking Card
17. Stacking Card - Programming
ProgrammingIt is not required to program for
connection (Same as TDE600 to TDE620 connection).
Property of cards in TDE/NCP can be programmed
using NS1000 Web.
14
18. Recommendation of Configuration
KX-NS1000 is recommended as follows, when new
customer does not have Panasonic PBX now and they
want to use IP phone mainly for extension.
When customer wants to use When customer wants to use Recommendation
for Extension for Trunk Recommendation
One PRI or 4 BRI Optional Card
E1 / 2 or more PRI
E1 / PRI 4 BRI Trunk Adapter( Optional Card)
IP Phone 2 SLT E1 / PRI 2 Analog
3 or more Analog CO TDE/NCPas optionby H.323
5 or more BRI TDE/NCPas optionby H.323
Other mixture TDE/NCPas optionby H.323
IP Phone Digital PT Analog PT SLT (Any above configuration) TDE620with Stacking Card
Version 1 2
Version 2
Version 1 2
Version 2
15
19. KX-NS1000 Capacity
Total capacity is as follows.
Line Line Line NS1000x 1 NS1000x 2 NS1000x 3 NS1000x 4 or more
Trunk Trunk Trunk 256 256 x 2 600 600
Legacyby stacking card or/and xxxSLT2 card Legacyby stacking card or/and xxxSLT2 card 256 256 x 2 600 600
IP incl E1/PRI adapter IP incl E1/PRI adapter 256 256 256 256
SIP 256 256 256 256
H.323 48 48 x 2 96 48 x 2 96 48 x 2 96
Extension Extension Extension 640 1000 1000 1000
Digital PT / Analog PT / SLTby stacking card or/and xxxSLT2 card Digital PT / Analog PT / SLTby stacking card or/and xxxSLT2 card 480 SLT (1)512 DPT (2) 1000 1000 1000
IP IP 640 1000 1000 1000
UT 640 1000 1000 1000
NT (NS1000 V1) 128 128 x 2 128 x 3 128 x N or 1000
NT (NS1000 V2) 256 256 x 2 256 x 3 1000
(1) 24SLT x 10 by TDE620 x 2 for example(2)
256 DPT incl DXDP by TDE620 x 2 for example
16
Chapter 2Specifications
17
21. Hardware Appearance
Hardware Appearance is as follows.
Front
No. Description
1 System LED
2 E1 / PRI line LED
3 DC Jack
4 LAN Port
5 LAN LED (Link)
6 LAN LED (Transmission Speed)
7 E1 / PRI line port
8 Initialize button (Not slide switch)
Back
Wall Mountain
Unpack the box and check the items below Main
Unit x 1 Screw x 2 Washer x 2
18
22. PoE (Power over Ethernet)
KX-NS8188 / KX-NS8290 supports PoE.If PoE is
not supported by network, AC adapter is
required. KX-A420 for Brazil KX-A239
for others) These are same model of AC adapter
for KX-UT phone.
19
23. KX-NS8188 E1 Adapter
KX-NS8188 E1 adapter supports following features.
Features Features NS8188 TDA0188(Reference)
Signaling DR2 Yes Yes
Signaling EM-C No Yes
Signaling EM-P No Yes
Dial Type MFC-R2 Yes Yes
Dial Type DTMF Yes Yes
Dial Type Pulse No Yes
Caller Number Notification (ANI) Caller Number Notification (ANI) Yes Yes
Charge / Meter Pulse Charge / Meter Pulse No Yes
Deny collect call for Brazil Deny collect call for Brazil Yes Yes
Outgoing call auto disconnect Outgoing call auto disconnect Yes Yes
E1
KX-NS8188
KX-TDA0188
KX-TDE
KX-NS1000
20
24. KX-NS8290 PRI Adapter
KX-NS8290 PRI adapter supports following features.
Features Features Features NS8290 NS0290(Reference)
Mode CO (Public) CO (Public) Yes Yes
Mode Extension Extension No Yes
Mode QSIG-master/slave (Private) QSIG-master/slave (Private) Yes Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) CLIP / CLIR Yes Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) COLP / COLR No Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) CNIP /CNIR Yes Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) CONP / CONR No Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) Advice of charge Yes Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) Call Forwarding No Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) Call Hold No Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) Call Transfer (incl. ISDN Centrex) No Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) Tree-party conference No Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) Malicious call identification No Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) Generic keypad protocol No Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) CCBS No Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) ISDN - Virtual Private Network No Yes
ISDNCarrier Service(Public) ISDNCarrier Service(Public) E-911 (for PRI23) Yes Yes
No because these services by ISDN provider are
not popularand PBX can support same feature
basically.
ConfbyPBX
ConfbyISDN
ISDN
KX-NS8290
KX-NS0290
PRI Card
KX-NS1000
21
25. KX-NS8290 PRI Adapter for QSIG
KX-NS8290 PRI adapter supports QSIG also.
NS1000 or other PBX
Features Features NS8290 TDA0290(Reference)
QSIG service CLIP/CLIR Yes Yes
QSIG service CNIP/CNIR Yes Yes
QSIG service Call Forwarding (CF) Yes Yes
QSIG service Call Transfer (CT) Yes Yes
QSIG service Completion of Calls to Busy Subscriber (CCBS) Yes Yes
QSIG service Network Direct Station Selection (NDSS) Yes Yes
QSIG service Centralized Voice Mail Yes Yes
QSIG service Network ICD Group Yes Yes
PRI QSIG
Private Network(Leased ISDN)
PRI QSIG
H.323 QSIG
30ch or 23ch
IP Trunk AK
H.323 is used for this configuration instead of
SIP.
KX-NS1000
Line Line Line NS1000x 1 NS1000x 2 NS1000x 3 NS1000x 4 or more
IP incl E1/PRI adapter IP incl E1/PRI adapter 256 256 256 256
SIP PRI Adapter for Public 256 256 256 256
H.323 PRI Adapter for QSIG 48 48 x 2 96 48 x 2 96 48 x 2 96
22
26. Fractional Service
Fractional service is also available.ltStand
alonegt
20chE1/PRI
20ch
KX-NS1000
ltOne-look networkgt
20chE1/PRI
60chE1/PRI
10chE1/PRI
Total 256ch
20ch
10ch
30ch
30ch
16th KX-NS1000in Niseko
1st KX-NS1000in Fukuoka
2nd KX-NS1000in Tokyo
23
27. Solution with Back-up Master
Back-up is available automatically for SIP trunk
incl E1 / PRIadapter, KX-NT/UT IP-phone and one
look connection.
PRI/E1 or SIP Provider
Back-up master PBX works as slave PBX
usually.But it works as master PBX after master
PBX stops working.
KX-NS1000 (2nd)Back-up Master
SIP Trunk
One-Look AK
One-Look AK
KX-NS1000 (1st)Master
KX-NT
KX-UT
KX-NT
KX-UT
PRI/E1 or SIP Provider
After master PBX stops working,
KX-NS1000Back-up Master
SIP Trunk
One-Look AK
One-Look AK
KX-NS1000Master
KX-NT
KX-UT
KX-NT
KX-UT
24
Chapter 3Concept of Programmingfor Public
Connection
25
31. Concept of Programming - Adapter
The trunk adapter is PBX with E1 / PRI trunk and
SIP extension.SIP trunk of KX-NS1000 is
registered to SIP extension of the
adapter.ltProgramming for the trunk
adaptergtSoftware of the adapter is basically
same as KX-NS1000. Features except E1 / PRI and
SIP extension are removed. Therefore programming
method is very similar to KX-NS1000.
E1/ ISDN
- PRI configuration is same as programming for
KX-NS1000 PRI card (KX-NS0290). E1
configuration is same as KX-TDE E1 card
(KX-TDA0188). - SIP extension configuration is
same as KX-NS1000. But SIP extension is
programmed by default. 401 to 430 for E1 /
PRI30 401 to 423 for PRI23
PRI
E1 / PRI
SIP Extension401-430
30ch or 23ch
ID 401-430SIP Trunk
KX-TDA0188
PRI Card
KX-NS0290
KX-NS1000
KX-TDE
26
32. Concept of Programming NS1000
ltProgramming for KX-NS1000gtThe trunk adapter is
basically SIP provider for KX-NS1000.Following
has to be programmed.- IP address of the adapter
as SIP server destination - SIP registration
User ID (Password is not required.)- Connection
Attribute SIP Provider / Trunk Adapter
E1/ ISDN
E1 / PRI
SIP Extension401-430
30ch or 23ch
ID 401-430SIP Trunk
KX-NS1000
27
33. Concept of Programming - Call
ltProgramming for KX-NS1000 - CONTgtProgramming of
the trunk adapter is not required for DDI / DIL
incoming call from E1/PRI to SIP extension. It
works like DIL 11 without programming and
DDInumber and caller ID are informed from the
trunk adapter to KX-NS1000. Programming of
KX-NS1000 is required for DDI / DIL.Outgoing
call is also programmed forKX-NS1000 instead of
the trunk adapter. Therefore administrator
has to access only KX-NS1000 to change extension
number, DDI and so on after dealer installed.
E1 / ISDN
E1 / PRI
CH1 CH2 CH30
Trunk Adapter
DDICaller ID
SIP Extension
401 402 430
SIP Trunk
KX-NS1000
28
Chapter 4Step by Step Programmingfor Trunk
Adapter
KX-NS1000
29
41. Initialize
Operation and SYSTEM LED display is as
follows.1. Power On (Connect AC adapter or
connect LAN with PoE) (a) Amber On (5 sec)
(b) Amber rapid flash (5 sec)2. During (b), keep
pressing Initialize button for 1s. (c) Off (2
sec) (d) Amber On (30 sec) (e) Amber slow
flash (120 sec) (f) Green slow flash-
Display of (b) finishes before 5 sec after
operation of (2).- Display of (f) means success
of initialization and awaiting Easy set-up of
web maintenance console.
KX-NS1000
System LED
Initialize Button
30
42. LED Indication
LED indication is as follows.
KX-NS1000
31
43. PC Connection - 1
(1) Set IP address 192.168.0.99 for example to
your PC like first connection of KX-TDE or
KX-NCP. - Trunk adapter does not have
maintenance port with DHCP server. -
Sub-net mask should be 255.255.255.0 (2) Connect
192.168.0.151 by Firefox. - Default IP
address of trunk adapter is 192.168.0.151.
KX-NS1000
KX-NS1000
DHCP Server
192.168.0.101by default
Trunk Adapter
For demo, NS1000 with DHCP server function is
useful to assign IP address of PC automatically.
192.168.0.151by default
192.168.0.99for example
32
43. PC Connection - 2
(1) In 10 seconds from step in previous page,
log-in menu is displayed.(2) Input INSTALLER
as user and 1234 as password.
KX-NS1000
33
44. Easy setup - Language selection
(1) Select language.
KX-NS1000
34
44. Easy setup - 1
(1) Select Suffix of KX-NS1000 and area.
KX-NS1000
No need to change
If Suffix is changed, system restarts again after
click OK.Wait 3 min and connect PC again.
(a) Amber slow flash (30 sec)(b) Amber On (10
sec)(c) Amber rapid flash (5 sec)(d) Amber On
(30 sec)(e) Amber slow flash (120 sec)(f)
Green slow flash
35
44. Easy setup - 2
No need to change.- Adapter name is only for
reference.- Time is used only for error log.
KX-NS1000
36
44. Easy setup - 3
(1) Input IP address of trunk adapter in actual
customers network. Get the IP address from
IT manager.) For demo, default is OK.
KX-NS1000
37
44. Easy setup - 4
No need to change.- Time is used only for error
log.
KX-NS1000
38
44. Easy setup - 5
(1) Input password as you hope, click
Finish.(2) Wait for 30 seconds.
KX-NS1000
If LAN setting is changed, system restarts again
after click OK.Wait 3 min and connect PC again.
(a) Amber slow flash (30 sec)(b) Amber On (10
sec)(c) Amber rapid flash (5 sec)(d) Amber On
(30 sec)(e) Amber slow flash (120 sec)(f)
Green slow flash
39
45. Maintenance Console - Top menu
If LAN setting is changed, (1) Remove the trunk
adapter from LAN(2) Connect it to actual
customers network.(3) Connect PC to IP address
of trunk adapter using Firefox.(4) After log-in,
following top menu is displayed.If LAN setting
is not changed, following Top menu is displayed.
KX-NS1000
40
45. Maintenance Console - 1
Software version can be confirmed as follows.
KX-NS1000
41
45. Maintenance Console - 2
Parameter for PRI can be modified as
follows.(Same as PRI 2 SLT card)
KX-NS1000
42
45. Maintenance Console - 3
IP address of adapter can be changed.(No need to
change usually.)
KX-NS1000
43
45. Maintenance Console - 4
Software can be updated by one step. (Not same
as KX-NS1000) - Wait 15 minutes after clicking
Execute. (Same as KX-NS1000.)
KX-NS1000
44
45. Maintenance Console - 5
E1/ PRI Card diagnosis is supported.
KX-NS1000
Out of service can be assigned.This is required
for software update also.
45
Chapter 5Step by Step Programmingfor KX-NS1000
46
51. KX-NS1000 - Out of Service
Install virtual SIP trunk card.Out of service is
required for port or card beforeprogramming in
following pages.
KX-NS1000
47
52. KX-NS1000 - Connection Attribute
Change connection attribute from SIP
providerto Trunk Adapter for each channels or
clickTrunk Adapter button to change max. 30
ch at the same time.
Use this. No need to program each
ch.
KX-NS1000
48
53. KX-NS1000 - Trunk Adapter button - 1
Input IP address of trunk adapter and click
Next.- Trunk adapter name is for reference.
192.168.0.151
192.168.0.152
KX-NS1000
Web maintenance console for the trunk adapter is
opened.
For reference
Max. 16 Adapter) If program manually not using
trunk adapter, more than 16 adapter can be
programmed.
49
54. KX-NS1000 - Trunk Adapter button - 2
Select range to connect the trunkadapter instead
of SIP provider.Select IP address and click
Finish.If fractional service is used, set
20 for example. Otherwise NS1000 tries making
call using 21ch to 30ch of PRI.
192.168.0.151
192.168.0.152
SIPProvider
KX-NS1000
50
55. KX-NS1000 - Registration to SIP Server
Connection attribute were programmed by previous
step. Parameters for registration to SIP server
(E1/PRI adapter) were also programmed.
192.168.0.151
192.168.0.152
KX-NS1000
51
56. KX-NS1000 - CLIP
PBX CLIP has to be selected as follows to send
CLIP on extension for outgoing call.
KX-NS1000
52
57. KX-NS1000 - In Service
Set In Service. - Other programming such as ARS,
TRS is basically same as PRI for KX-TDE/NCP.-
However it is required to program as next 2
pages additionally because I/F with trunk
adapter is SIP.
E1 / ISDN
KX-NS1000
When E1/PRI line of trunk adapter is fault, trunk
adapter stops communication with KX-NS1000.
Therefore the SIP trunk ch of KX-NS1000 becomes
fault.This specification is useful not to use
the SIP ch automatically for ARS and so on.
53
58. KX-NS1000 - Dialing Plan
Dialing plan has to be programmed for outgoing
callbecause I/F with trunk adapter is SIP
en-block dial.Otherwise extension caller has to
wait for 10 secondsto hear ring back tone after
dial to E1/PRI trunk adapter.
KX-NS1000
54
59. KX-NS1000 - DDI Modification
DDI first 3 digits has to be removed because I/F
with trunk adapter is SIP. ID such as 401
real DDI number is informed as DDI number from
E1/PRI adapter to KX-NS1000.
E1 / ISDN
DDI 5678
DDI 4015678
KX-NS1000
Program DDI table.
DDI 5678
55
Chapter 6Programming Hint forPrivate Mode (QSIG)
56
61. Easy Setup for Adapter
Private has to be selected by easy setup mode.
192.168.0.101
KX-NS1000
192.168.0.151
Ext 2xx
H.323
ISDN QSIG
Ext 1xx
57
62. PRI QSIG mode for Adapter
QSIG (Slave) is assigned automatically after easy
setup.
192.168.0.101
KX-NS1000
192.168.0.151
Ext 2xx
H.323
ISDN QSIG
Ext 1xx
58
63. H.323 programming for Adapter
H.323 destination programming of adapter is also
required. Common IP address is assigned for any
dial. (Not each dial)
192.168.0.101
KX-NS1000
192.168.0.151
Ext 2xx
H.323
ISDN QSIG
Ext 1xx
IP address of Back-up master PBX
59
64. H.323 programming for KX-NS1000
H.323 destination programming of KX-NS1000 is
required for adapter as well as other PBXs.Sole
difference is that activation key for IP trunk is
not required.
192.168.0.101
KX-NS1000
192.168.0.151
Ext 2xx
H.323
ISDN QSIG
Ext 1xx
192.168.30.101
Ext 3xx
DN2IP table (Dial to IP)-------------------------
---------- Dial 2xx to 192.168.0.151Dial 3xx
to 192.168.30.101Dial 4xx to 192.168.40.101
192.168.40.101
Ext 4xx
60
Chapter 7Demonstration Guide
61
71. Configuration Example
KX-TDEwith 2 PRI Extensionas ISDN provider
PRI
DLC
PRI
Ext 301 Ext 31X Ext 32X(for
test)
SIP Trunk (30-ch)
KX-NS1000
KX-NCP with PRI
PRI
Ext 101CLIP 01234311
Ext 201CLIP 01234321
Ext 102CLIP 01234312
62
72. Outgoing Call
KX-TDEwith 2 PRI Extensionas ISDN provider
PRI
DLC
PRI
Dialing plan 3XX
Ext 301 Ext 31X Ext 32X(for
test)
DDI 321
Dial 321(Remove 01234 by ARS)
Dial 321
SIP Trunk (30-ch)
KX-NS1000
KX-NCP with PRI
PRI
DDIProgram
Dial 0/9-01-234-321
01234311
Ext 101CLIP 01234311
Ext 201CLIP 01234321
Ext 102CLIP 01234312
63
73. Incoming Call
KX-TDEwith 2 PRI Extensionas ISDN provider
PRI
DLC
PRI
Ext 301 Ext 31X Ext 32X(for
test)
Dial 312(Remove 01234 by ARS)
DDI 312
DDI 401312
SIP Trunk (30-ch)
KX-NS1000
KX-NCP with PRI
DDIProgram
PRI
01234321
Dial 0/9-01-234-312
Ext 101CLIP 01234311
Ext 201CLIP 01234321
Ext 102CLIP 01234312
64
74. PRI Extension
Standard LAN cable can be used by this switch for
PRI Extension.
PRI
DLC
PRI
Ext 301 Ext 31X Ext 32X(for test)
PRI
65
75. KX-NS1000 SIP Register Resending
Register Resending Interval has to be 10
seconds.If default value 300 seconds is used, it
takesfor 0 to 300 seconds to reconnect KX-NS1000
and trunk adapter, when trunk adapter returns IN
Service from Out of Service or LAN is reconnected.
KX-NS1000
66
Thank you !The END