The Windsor Consulting Group, Inc. - PowerPoint PPT Presentation


PPT – The Windsor Consulting Group, Inc. PowerPoint presentation | free to view - id: 79ee27-MzY0M


The Adobe Flash plugin is needed to view this content

Get the plugin now

View by Category
About This Presentation

The Windsor Consulting Group, Inc.


Title: PowerPoint Presentation Author: New User Last modified by: New User Created Date: 11/13/2013 4:04:25 PM Document presentation format: On-screen Show (4:3) – PowerPoint PPT presentation

Number of Views:55
Avg rating:3.0/5.0
Slides: 26
Provided by: NewU317


Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: The Windsor Consulting Group, Inc.

  • The Windsor Consulting Group, Inc.
  • Occupational Training and Education
  • Global Business Health and Safety Strategies

Globally Harmonized System (GHS) Hazard
Communication Awareness Training
Overview This course provides awareness level
training on the updates made to the OSHA Hazard
Communication Standard 29 CFR 1910.1200 which
have been implemented to meet the Globally
Harmonized System of classification and labeling
of chemicals. Course provides an overview of the
major changes to the Hazard Communication
Standard, including what needs to be done to meet
new requirements for labeling, safety data
sheets, and training to make the workplace safer
for workers by providing easily understandable
information on the appropriate handling and safe
use of chemicals. Duration 4 Hours
Hazardous Waste Operations and Emergency Response
(HAZWOPER) General Site Workers (40-Hours)
  • Overview This course is intended for employees
    who will work on hazardous waste sites or
    participate in emergency response operations
    involving toxic chemicals, biological and
    radiological agents, and other physical hazards.
    According to Occupational Safety and Health
    Administrations (OSHA) Hazardous Waste
    Operations and Emergency Response Standard, 29
    CFR 1910.120, employees must not perform any
    hazardous waste operations or work on emergency
    response tasks including natural disasters unless
    they have been trained to the level required by
    their job function and responsibility. At the
    conclusion of this course, students will learn
  • How to recognize common physical and chemical
    hazards in the workplace, as well as uncontrolled
    environments, and estimate the associated risk
  • The importance of the site safety plan
  • Ways to reduce the possibility of exposure to
    hazards on site
  • The selection and use of Personal Protective
    Equipment (PPE)
  • How to use direct reading instruments and
    interpret results
  • Duration 40 Hours (Comprehensive) 8 Hour (Annual

Hazardous Waste Operations and Emergency Response
(HAZWOPER) Occasional Site Worker (24-Hours)
  • Overview
  • This course is intended for workers who will
    perform occasional and limited duties on
    hazardous waste and emergency response and
    recovery work sites. According to Occupational
    Safety and Health Administrations (OSHA) 29 CFR
    1910.120, 24 hour training is required for
    workers on site only occasionally for a specific
    limited tasks (such as, but not limited to,
    groundwater monitoring, land surveying, or
    geo-physical surveying) and who are unlikely to
    be exposed over permissible exposure limitsshall
    receive a minimum of 24 hours of instruction off
    the site. At the conclusion of this course,
    students will
  • Understand how hazardous materials are handled
    and identified
  • Understand the effects of exposure to hazardous
  • Understand the importance of the site safety plan
  • Learn the significance of using appropriate
    safety methods and work practice controls
  • Duration 24 Hours (Comprehensive) 8 Hour (Annual

Permit-Required Confined Space Entry With
Hands-On Exercise
  • Overview
  • This course is required training for any
    employee who will perform work within a
    permit-required confined space entry. Training
    content will include
  • Identification of confined spaces
  • Differences between confined spaces and
    permit-required confined spaces
  • Duties and Responsibilities of Authorized
    Entrant, Attendant, and Supervisor
  • Proper work practices and procedures for safe
  • Air monitoring requirements including hands-on
  • Proper documentation of confined space entry (the
    Confined Space Entry Permit)
  • Overview of confined space rescue procedures
  • Hands-on practice in confined space entry and
    non-entry confined space rescues
  • This training meets the OSHA Permit-Required
    Confined Space Standard (29 CFR 1910.146) and
    includes non-entry rescue requirements.
  • Duration 16 Hours (Comprehensive) 4 Hour

Occupational Noise Exposure Awareness
  • Overview
  • The objective of this course is to train
    employees on ways to protect and conserve their
    hearing in noisy environments. The following
    topics will be presented
  • Occupational Safety and Health Administration
    (OSHA) Occupational Noise Exposure Standard (29
    CFR 1910.95)
  • Types of occupational noise sources found in
    manufacture, construction, and other global
  • Understanding the effect of elevated levels of
    noise on hearing
  • Noise assessment and monitoring techniques
  • Hearing conservation methods and interpretation
    of results
  • Construct of engineering/administrative controls
  • Selection and use of personal protective
  • Training and recordkeeping requirements
  • Duration 4 Hours

Personal Protective Equipment (PPE)
  • Overview
  • This training is designed to meet the
    requirements of the Occupational Safety and
    Health Administration (OSHA) PPE Standards, 29
    CFR 1910 Subpart I. Training topics include
  • Types of required PPE based on job safety and
    health analysis and risk assessment
  • OSHA PPE regulations capabilities and
    limitations of PPE
  • Methods and metrics to measure effectiveness of
    using PPE
  • How to properly use, fit, and adjust PPE
  • PPE cleaning, maintenance, storage, useful life,
    and disposal guidelines.
  • Duration 4 Hours

Machine Guarding
  • Overview
  • This course is deigned for those who operate or
    maintain equipment that utilizes machine guards.
    This training is designed to meet the
    requirements of 29 CFR 1910 Subpart O. The topics
    covered include
  • Identification of the hazards of machinery
  • Understanding the purpose and use of safeguards
  • Describing and identifying the hazards specific
    to machines that employees work
  • Identifying procedures to be followed if machine
    guards are damaged, missing, or unable to provide
  • Lockout and tagout requirements
  • Duration 2 Hours

Job Hazard Analysis
Overview This class will discuss how to conduct
a Job Hazard Analysis (JHA). It will focus on the
relationship between the worker, the tasks, the
tools, and the work environment, as well as what
to look for to reduce or eliminate uncontrolled
hazards. This class consists of two group
exercises designed to identify the jobs for which
JHAs should be performed as well as how to
complete JHA forms. Duration 4 Hours
Bloodborne Pathogens
Overview This course focuses on ways to reduce
occupational exposures to blood and other
potentially infectious materials (OPIM) through
workplace and engineering controls. Students will
also learn the significance of the Exposure
Control Plan as well as the importance of the
Hepatitis B vaccine. Recent findings indicate a
promise for a vaccine for Hepatitis C. Learn
more by attending this course. Duration 4 Hours
Trenching and Excavating
  • Overview
  • Excavation operations are recognized as one of
    the most hazardous construction operations.
    Course topics include
  • Common hazards associated with trenching and
  • The basics of soil mechanics
  • How to determine soil type, using both visual and
    manual methods
  • Various mechanical methods for trenching and
  • Determining initial site conditions
  • Selecting applicable protective measures
  • Duration 8-Hours

Manual Materials Handling (Back Safety)
  • Overview
  • This course focuses on one of the most
    physically challenging responsibilities in the
    workplace - manual materials handling.
    Participants will learn
  • Proper lifting and storage procedures
  • Basic principles of ergonomics to recognize
    hazards and injuries
  • Procedures for reporting hazardous conditions
  • Methods and procedures for early reporting of
  • Selection and use of personal protective
  • Duration 2 Hours

Slips, Trips, and Falls Safety
  • Overview
  • Slips, trips, and falls constitute 15 of all
    job-related accidental deaths and are second only
    to motor vehicles as a cause of fatality. This
    module is designed to provide all workers with a
    better awareness of safe conditions and work
    practices and procedures to reduce slip, trip and
    fall hazards. Topics covered include
  • OSHA standard for walking and work surfaces
  • Method to measure slippage on floor surfaces
  • Hazards in the workplace
  • Hazard prevention
  • Work site housekeeping and maintenance
  • Proper footwear
  • Proper walking techniques
  • Duration 2 Hours

Fall Protection
  • Overview
  • Each year, falls account for the greatest number
    of fatalities in the construction industry. And,
    falls are always a major concern in other
    industries. This course is designed to ensure
    compliance with Occupational Safety and Health
    Administrations (OSHA) Fall Protection Standard,
    29 CFR 1926.500. It is intended for employees who
    work on scaffolding, trusses, platforms, or
    roofs. Fall protection can be adapted and
    applied to manufacturing, maritime, agriculture,
    logging, and other hazardous industries. The
    course includes
  • How to erect, maintain, disassemble, and inspect
    protection systems
  • Use of control measures including handrails,
    covered floors
  • Engineering controls such as forklifts, manlifts,
    trucks, etc.
  • Guardrail systems and personal fall arrest
  • How to work on low-sloped roofs in residential
  • Duration 4 Hours

Overview This training provides instruction
covering the proper practices and procedures used
to safely power down/shut down equipment, isolate
it from its energy source(s), and prevent the
release of potentially hazardous energy while
maintenance and servicing activities are
performed. This training meets Occupational
Safety and Health Administrations
(OSHA) Lockout/Tagout Standard (29 CFR
1910.147). Duration 4 Hours
Respiratory Protection
Overview The objective of this course is to
provide mandatory training that explains the need
for respiratory protection equipment to include
proper selection, use, and care of employee
respiratory protection. The course will cover
terminology, Occupational Safety and Health
Administration (OSHA) standards, National
Institute for Occupational Safety and Health
(NIOSH) certification, and medical evaluation
requirements. The course meets the requirements
set forth in the OSHA Respiratory Protection
Standard (1910.134) and may include respirator
fit testing, if required. Duration 4 Hours
Powered Industrial Trucks/Forklifts
Overview This class focuses on the safe
operation of powered industrial trucks. The
American Society of Mechanical Engineers (ASME)
defines a powered industrial truck as a mobile,
power-propelled truck used to carry, push, pull,
lift, stack, or tier materials. Powered
industrial trucks include forklifts, pallet
trucks, rider trucks, fork-trucks, or
lift-trucks. Each year, tens of thousands of
preventable forklift-related injuries occur the
workplace. This course will provide training on
safe operation of powered industrial trucks with
special emphasis on loading and unloading, center
of gravity, stability, and mechanical
limitations. Beside the formal instruction, there
is a hands-on practical , which aligns with the
manufacturers instruction. Duration 8 Hours
Electrical Safety
  • Overview
  • This course provides general background
    information on electrical safety for employees
    who work primarily in non-technical positions.
    Topics include
  • Dangers of electrical shock and arc flash
  • Qualified person training and education
  • Written program and procedures
  • Selection of wiring and protective devices
  • Calculation of arc flash distances
  • Arc flash and shock hazard analysis
  • Safe work practices and procedures
  • Lockout/tagout procedures and testing equipment
  • Personal protective equipment and clothing
  • Safe work environment
  • Duration 8 Hours

Accident Investigation
Overview This course is intended for
supervisors who are tasked with investigating
accidents. Participants will learn to distinguish
between an accident, a near miss, and an
incident. The key points in conducting an
accident investigation will be discussed,
including the importance of timeliness and
conducting post-accident employee
interviews. Duration 3 Hours
Spray Painting Safety
  • Overview
  • This training is designed for employees that are
    engaged in spray painting activities. OSHA
    Standard 1910.94 "Ventilation" defines a
    "spray-finishing operation" as the "employment of
    methods wherein organic or inorganic materials
    are utilized in dispersed form for deposit on
    surfaces to be coated, treated, or cleaned."
    Spray operations can present both physical and
    health hazards to those involved. Topics include
  • Composition of coatings
  • Occupational health hazards from coating
  • Fire and explosion hazards associated with
    spraying operations
  • Personal Protection Equipment (PPE) and clothing
  • Proper ventilation and airflow in booths and
  • Routine maintenance and housekeeping
  • Duration 2 Hours

Welding and Cutting Safety
  • Overview
  • This class provides information on the safety
    and health hazards of welding and cutting, which
    are known to pose a unique combination of both
    safety and health risks to more than 500,000
    workers in a wide variety of industries. Topics
  • Hazards and controls specific to oxy-acetylene
    fuel gas welding, brazing, cutting
    and arc-welding
  • Occupational health hazards from metal fume and
  • Occupational health hazards from paint and other
  • Ionizing radiation exposure from thorium
  • Non-ionizing radiation safety ultraviolet,
    and infrared
  • Selection and use of respirators, personal
    equipment and clothing
  • Hazards of flammable and combustible materials
  • Duration 2 Hours

OSHA Standards For The Construction Industry
  • Overview
  • This course covers the scope and application of
    OSHA policies, procedures, and standards as they
    relate to the construction industry. Special
    emphasis is given to those areas that are
    considered the most hazardous. Topics include
  • Introduction to OSHA
  • GHS and hazard communication
  • Personal protective equipment
  • Fire protection and prevention
  • Electrical safety hazards
  • Tools- hand and power tools
  • Fixed and mobile scaffolding
  • Floors, wall openings, and ladders
  • Fall protection
  • Trenching and excavations
  • Duration 10-Hours (Awareness) and 30 Hours

OSHA Standards For Manufacture and General
  • Overview
  • This course covers Federal and state policies,
    procedures, and standards as well as general
    industry safety and health principles. Special
    emphasis will be placed on areas that are
    considered to be most hazardous. Topics include
  • Introduction to OSHA
  • GHS and hazard communication
  • Ergonomics
  • Personal protective equipment
  • Fire protection/egress
  • Electrical hazards
  • Hazardous materials
  • Walking working surfaces
  • Materials handling
  • Machine guarding/lockout/tagout
  • Duration 10-Hours (Awareness) and 30 Hours

Indoor Air Quality Factors Affecting Health
Overview Indoor air quality problems can be
caused by ventilation system deficiencies,
overcrowding, microbiological contamination, and
outside air pollutants. Typical symptoms may
include headaches, unusual fatigue, itching or
burning eyes, skin irritation, nasal congestion,
dry or irritated throats, and nausea. This
training presents the most common identifiable
causes and health effects of poor indoor air
quality and presents an overview of indoor air
quality in office settings. Duration 8 Hours
Offices located in Washington, DC and New York
Metro Area Email Tel 1
732.221.5687 Websites
-windsor-consulting-group-inc and