ISE 370 Project: Create a Machined Part Using the Computer Numerically Controlled (CNC) Machine

1
ISE 370 Project Create a Machined Part Using the
Computer Numerically Controlled (CNC) Machine

• Mercer University School of Engineering
  Industrial Engineering Course Project
• David Harris (Industrial Engineering)
• Russell Hazelrig (Industrial Engineering)
• Chris Meador (Industrial Engineering)

2
Project Goal and Solution

• Develop design of part
• Choose material (blue wax)
• Draft dimensioned drawing in AutoCAD
• Write program using G-code
• Use Computer Numerically Controlled (CNC) Machine
  to manufacture part
• Use Coordinate Measuring Machine (CMM) to check
  part quality

3
Dimensioned Drawing

4
Partial Code for CNC Production of Cross

• N1 07778 CROSS
• N2 M6 T5
• N3 G0 G90 S1500 M3 E1 X0 Y0
• N4 H5 Z1.0 D5
• N5G41 X1.2094 Y-0.2969
• N6 G1 Z-0.5 F20
• N7 G1 X1.7906 Y-0.2969
• N8 G3 X1.7906 Y-1.2749 R1.2456
• N9G3 X1.2597 Y-0.9780 R1.4872
• N10 G1 X1.4523 Y-1.1551
• N11 G1 X1.2597 Y-1.3311
• N12 G3 X0.5812 Y-1.3311 R1.4872
• N13 G3 X0.5812 Y-2.9062 R3.1470
• N14 G1 X0.0 Y-2.9062

5

Verify Dimensions Using CMM Machine

6
Final Machined Part The Cross

Contact Information
Acknowledgements

• Dr. Joan Burtner, Chair
• Recruitment and Retention Committee
• Email Burtner_J_at_Mercer.edu
• Mercer University School of Engineering
• 1400 Coleman Avenue Macon, GA
• Phone [phone]

• Mr. Bill Campbell
• Engineering Lab Supervisor
• Mercer University School of Engineering
• 1400 Coleman Avenue Macon, GA