Title: NobelActive Internal and External Hex Implants Nobel Marketing Claims this is the
1NobelActive Internal and External Hex Implants
Nobel Marketing Claims this is the Implant of
the Future
2NobelActive is a Conglomeration of Common
Features that work individually but not
necessarily in combination
Screw-Vent Internal Hex/bevelNiznick Patent 1986
Astra 11Deg. Bevel
NobelActive hex too deep to allow for 8mm
implant length
45 Deg. Bevel Bevel with proven 20 year history
of stability
Osstems double Threads over entire length.
NobelActive transition of sharp to flat threads
not conducive for self-tapping insertion in
dense bone
Oraltronics Pitt-Easy Implant with Deep Apical
Threads Alpha Bio Clone with Conical Connection
3NobelActive External -With External Locking
Taper ConnectionNobel Marketing Claims this is
the Implant of the Future
1.5mm High External Hex 3.5mm Morse Taper Post
4NobelActive External - 5mm high tapered post
requires parallelism Miter Implant with External
Post Evolved quickly to Internal Socket (Bicon)
Those who cannot remember the past are condemned
to repeat it QUOTATION George Santayana
(18631952), U.S. philosopher,
Driskell Patent 1985 Tapered Post on
ImplantLocking taper concept impacting the
female taper of the implant head with the male
counterpart on the root structure.
Driskell Patent 1988 Tapered Socket in
ImplantLocking Taper Concept The head member
has a tapered rod or socket for connection to
the root
5NobelActive (TiUnite) and Alpha Bios SFB (SLA)
Implants BUT Nobel claims 98.3 Alpha Bio study
applies to its new implant
ABOVE Nobel Claims NobelActive success of 98.3
for up to 4 years BELOW Alpha Bios Catalog
Claims same 98.3 success after more than 5
years but the surface is SLA (sand blasted with
large grit followed by acid etching) like
Straumanns Surface
6Nobel Claims NobelActive Functions like
Corkscrew Close Evaluation indicates they
should have left it in the bottle
7Nobel Biocares NobelActive Marketing Claims
NobelActive Marketing Claims
Questionable Validity of Marketing Claims
- Higher than What Replace? Increased stability
achieved by spreading bone whereas deep threads
cut bone - Self-threading like any screw in soft bone.
- Path of implant insertion should be established
during surgery, not during implant insertion.
That is what guide pins and end-cutting drills
are for. - Nothing unique about press-fit connection. Miter
Implant (1980) had external tapered post
evolved to internal press-fit connection of Bicon
- If cement is a risk, why does NobelActive
Internal have a screw-retained connection? - Why does NobelActive have spiral cutting grooves
if not to cut through bone like conventional
(self-tapping) implants?
- bone-condensing expands indication range and
gives even higher initial stability. - self-drilling
- ability to change direction during surgery
- unique press-fit connection of abutment
- -removes risk of excess cement
- NobelActive Internal and External implants dont
cut through bone like
conventional implants, they press through it like
a corkscrew
8NobelActive External Claims
Claims are not Valid
- It is not a one-piece implant requires an
abutment. - Does not have 2-piece flexibility Can not use
angled heads greater than 12 degrees, ball,
screw-receiving or ceramic abutments. Require
parallel placement of implants for bridges. - A one-piece implant eliminates micro gap but a
precise-fitting internal connections maintain
marginal integrity anyway. Nobel still sells
external hex implants less stable
- One piece implant
- design with 2-piece flexibility
- locking tapered interface .. Eliminates bone
level micro gap, micro-movement and the use of
abutment screws.
9Dense Bone Drill is 4.6mmD but Platform is
3.9mmDNobelActive Leaves Gap around neck of
Implant in Dense Bone
104.3mmD Replace Implant is better choice than
4.2mmD NobelActive for insertion into Immediate
Extraction Sockets
Narrow Neck of NobelActive Requires Bone and Soft
tissue Grafting to fill defect left at crest of
ridge
5.0
5.0
3.9
5.0
11Compare NobelActive External Hex with ScrewDirect
One-Piece ImplantThe Prosthetic Advantages are
Obvious Cost Savings Significant
ScrewDirect 150 incl. Snap Transfer Cap
NobelActive ExternalRequires Attachment of one
of these four abutments
12Attach Remove Long Friction Fit Head to
NobelActive
Straight Friction-fit abutment too long
Heads of Implant exposed above bone
Tried to remove abutment with Forceps
Try in straight abutment.. Too long but locks in
13Attach Two Short Friction Fit Heads to
NobelActive using Mallet
Jack off abutment using Removal Screw
Shorter Abutment attached to Implants
Shorter Abutment attached to Distal Implant
Tap on Taper Lock Abutments with Mallet
14Preferred placement is angled between buccal and
lingual platesStraight Post of NobelActive
External requires vertical placement
15Why Change Drills and Platforms, just to change
threads?
NobelActive
ReActive
RePlus
- RePlus and ReActive have compatible Tri-Lobe
Connection - Both have Platform switching interface of
questionable value - Both have even taper to allow insertion into an
undersized socket for bone expansion, - Nobel Active has straight outer threads with very
tapered inside thread dimension - RePlus and ReActive have Mini-threads whereas
NobelActive has horizontal grooves. - RePlus and ReActive seal opening at crest of
ridge whereas NobelActive 4.3 5.0 implants are
narrower at top, leaving gap - RePlus and ReActive have double lead threads on
body for faster insertion.
16Very deep threads apically cuts rather than
compresses soft bone - any screw implant will
self-tap in soft bone.
NobelActiveNo Taper to OD of Threads
ScrewPlantGradual Taper for Bone Expansion
- NobelActive Claim
- The product is easy to use and provides high
initial stability and good outcomes. - The Apical Threads are too aggressive for
self-tapping insertion in Dense bone and are
designed to cut threads in soft bone rather than
expand and compress the bone for increased
initial stability. Any Implant will self-tap in
soft bone.
Deep apical threads will not expand narrow ridge
or compress soft bone
Soft Bone (Balsa) 3.91 in/lbs Insertion
TorqueHard Bone (Oak) 6.35 in/lbs Insertion
Torque
17ReActive with Tri-Lobe Connection and Platform
SwitchingProjected Launch Date January 2008
- Same taper to body as RePlus Implants allow
insertion in undersized socket for expansion - Flat-based deeper threads provide increased
surface area for greater stability in soft bone