JTAG Installation Guide - PowerPoint PPT Presentation

Loading...

PPT – JTAG Installation Guide PowerPoint presentation | free to download - id: 6529b7-OWJhY



Loading


The Adobe Flash plugin is needed to view this content

Get the plugin now

View by Category
About This Presentation
Title:

JTAG Installation Guide

Description:

JTAG Installation Guide (Bootloader installation) Simon Hsu What is JTAG ?? Purpose and Preparation JTAG Cable /Wiring /Pin Definition /Position Giveio installation ... – PowerPoint PPT presentation

Number of Views:0
Avg rating:3.0/5.0
Date added: 20 January 2020
Slides: 20
Provided by: ChiL150
Learn more at: http://support.elmark.com.pl
Category:

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: JTAG Installation Guide


1
JTAG Installation Guide (Bootloader installation)
Simon Hsu
2
Agenda
  • What is JTAG ??
  • Purpose and Preparation
  • JTAG Cable /Wiring /Pin Definition /Position
  • Giveio installation guide
  • Setup procedure
  • Demo

3
What is JTAG ??
  • What is JTAG ?? JTAG is the acronym for the
    Joint Test Action Group. This group defined IEEE
    1149.1 as the JTAG standard. This standard was
    set up so that integrated circuits could be
    tested when they were mounted on printed circuit
    boards though "boundary scan".

4
Purpose and Preparation
  • Purpose To burn the binary file from host PC to
    Intel Strata Flash ROM.
  • Preparation
  • --Recommended OS in host PC Win98,Win2k, WinXP
  • --Install giveio driver on host PC for Win2k
    and WinXP.
  • --JTAG cable
  • --Utility (JF1112.exe for PCM-7130/JFlashP.exe
    for PCM-7210)

5
JTAG cable
6
JTAG Wiring
7
JTAG Pin Definition
8
JTAG position -- PCM-7210 for example --
Pin1
9
JTAG position -- PCM-7130 for example (1) --
10
JTAG position -- PCM-7130 for example (2) --
11
Giveio Installation Guide (1)
  • Installation Guide ( take Win2000 for example)
  • 1) Copy the giveio.sys to " \system32\drivers"
  • 2) Go to Control Panel and Add/Remove
    Hardware.
  • 3) Click Next and select Add/Troubleshoot a
    device.
  • 4) Select Add a new device and click Next.
  • 5) Select No, I want to select the hardware
    from a list..
  • 6) Select COM LPT and link to giveio driver.

12
Giveio Installation Guide (2)
Here
13
Setup Procedure Guide
  • The procedure works both on CE.NET and Linux.
    Illustrate with PCM-7210 in Win2000.
  • 1) Copy the upgrade utility and bootloader in the
    same folder.
  • 2) Go to Start gt Run. Type cmd to enter
    command-mode window.
  • 3) Launch the upgrade utility at the path where
    the files are. ( type command JFlashP eboot.nb0
    for CE.NET
  • type command JFlashP bootldr for ARM
    Linux )

14
Setup Procedure -- PCM-7210 bootloader (1) --
Bootloader filename
Upgrade utility
15
Setup Procedure -- PCM-7210 bootloader (2) --
Type y, then Enter
16
Setup Procedure -- PCM-7210 bootloader (3) --
17
Setup Procedure -- PCM-7130 bootloader (1) --
Upgrade utility
Bootloader filename
Type y, then Enter
18
Setup Procedure -- PCM-7130 bootloader (2) --
Type y, then Enter
19
Setup Procedure -- PCM-7130 bootloader (3) --
About PowerShow.com