9000U Quick Guide

1
XELTEK

• 9000U Quick Guide
• Marketing RMA Department
• 07.01.2009

2
Agenda

• System Setup
• Running the program - Hardware Setup
• Running the program Software steup
• Quick Start Programming EEPROM Chip
• Standalone Mode
• Reference

3
System Setup
Insert the CD into a CD-ROM drive and the setup
program will start automatically, if not, please
run SETUP.EXE in the root path. Each model has
its own software, please do not mismatch. Also,
you can download the new version of software from
www. Xeltek.com
4
System Setup
The setup procedure goes step by step, you can
change the default settings as you needed during
setup process. First, setup wizard, please read
the text carefully. Change the checkbox if you
want. The installation process will not continue
unless you accept the terms. The License
Agreement can also be found in the
appendices Click Finish button to finish the
setup.
ltDriver Installationgt
5
Running the program - Hardware Setup

• Connect the programmer to the computers USB
  port. A minimum of one CF card must be inserted
  in the programmer before turning on the
  programmer. If you are using one CF card, insert
  the card into the slot for module 1. Having no CF
  cards installed into the programmer may result in
  a communication error when turning on the
  software.
• Then, turn on the programmer power switch after
  inserting the CF cards.

ltHardware Featuregt
6
Running the program

• Double click on the software icon located on
  your desktop to run the software. As the program
  starts, it will communicate with the programmer
  immediately and begin initialization.
• If communication error occur, please try the
  following
• Click on the Retry button.
• Shutdown software and turn off programmer.
  Afterwards, turn on the programmer and wait for a
  few seconds
• than turn on the software

ltInitializationgt
ltCommunication errorgt
7
Quick Start Programming EEPROM Chip

• Select Device
• Click Device button to select prefer Chip
  manufacturer and device name. (In this example,
  MX28F1000P chip was selected)
• Click OK button.

ltDevice Selectiongt
8
Quick Start Programming EEPROM Chip

• Enable insertion test and ID check
• Click Operation Option button to enable
  Insertion Test and ID check.
• To program a new chip, click Blank_Check first.
  If it fails, click Erase first then
  Blank_Check. And, Click Buffer button.

ltOperation Optiongt
9
Quick Start Programming EEPROM Chip

• Adapter installation
• The programmer is equipped with a standard DIP
  socket. For some device types , users need to use
  appropriate adapters. The Adapter Information
  dialogue box including

ltSocket adapter information and Socket adaptergt
10
Quick Start Programming EEPROM Chip

• Load data file/project file or edit data on the
  buffer
• There are three ways to load data into the
  buffer.
• 1. Load data file which is created by user.
  Superpro supports two data files(Hex/ASCII) and
  Fuse.
• 2. Load the project file which is created by
  superpro software. The project file encompasses
  current devices info, all operation option
  settings, and auto program sequence.
• 3. Edit buffer

ltData loading methods and Edit Buffergt
11
Quick Start Programming EEPROM Chip

• For production mode, edit auto function menu.
• Edit Auto function which is like a batch
  command. This function allows the software auto
  operation in order displayed in the right column.

12
Quick Start Programming EEPROM Chip

• Production Mode
• This function is used to program devices in large
  numbers. With the Insert ion Test, the programmer
  detects the chips insertion and carries out
  automatically the execution of the auto operation
  sequence.
• Once Enable this function, click Auto function.
  To end the production mode, please click cancel
  button at the left bottom corner.

1. Get chip off Pls program finished and wait
for chip off, please take the chip off. At this
point, check the result of programming, whether
success or failure, according to the info in
Message. 2. Put chip in Pls wait for chip
insertion, insert the chip into the socket
properly. 3. PROGRAMMING wait finishing.
ltEnable Production Modegt
13
Quick Start Programming EEPROM Chip

• Standalone Mode
• There are three steps to operate standalone mode
• 1. Click Download Project load the data into
  CF card
• 2. Turn off the programmer and disconnect USB
  cable from PC.
• 3. Turn the programmer on. Please, refer to
  Operation Instructions which contains the
  detailed information under stand-alone mode.

ltIn order to load the data into CF card, click
Download Projectgt
14
Reference

• Superpro Users Guide and model 9000U