1. Install the heat insulation

1
Install procedure
1. Install the heat insulation      on the floor.
2. Install the power film       on the heat
insulation.
3. Connect the wire to power film.
4. Connect the thermostat and     
temperature sensor with power film.
2
Sectioned drawing
PE-form
Power Film
Insulation sheet
Ground
(side view)
plywood
Laminate floor
Carpet
Wood tile
(plane figure)
3
1.Carpet / PVC Floors
PVC Floors
DST form
Carpet
? Install the heat insulation on the floor.?
Install the film on the heat insulation. ?
Install the DST form on the film. ? Cover the PVC
floors on the DST form.
? Install the heat insulation on the floor. ?
Install the film on the heat insulation. ? Cover
the carpet on the film.
NOTICE Please check the local heating.
4
2.Laminate flooring / Wood tile
Form
plywood
Wood tile
Laminate floor
Spray bond
concrete nail and anchor
? Install the heat insulation on the floor.?
Install the film on the heat insulation.?
Install the form on the film. ? Install the
laminate floor.
? Install the heat insulation on the floor.?
Install the film on the heat insulation.? Fixed
the plywood by concrete nail after install
the plywood on the film. ? Install the wood tile
after spray the bond on the plywood.
5
4.Solid wood flooring
Cross section
Plywood
Solid wood Flooring
? Make hole by hammer drill.
? Insert the concrete anchor to hole.
? Install the heat insulation on the floor. ?
Install the film on the heat insulation. ? Fixed
the plywood by concrete nail after install
the plywood on the film. ? Stick the solid wood
floor after paint the epoxy on the plywood.
? Fixed by screw.