AGGREGATE - PowerPoint PPT Presentation

About This Presentation
Title:

AGGREGATE

Description:

AGGREGATE Aggregates may be NATURAL or MANUFACTURED Natural aggregates: sand, gravel, crushed rock Manufactured aggregates: blast furnage slag Aggregates may also be ... – PowerPoint PPT presentation

Number of Views:330
Avg rating:3.0/5.0
Slides: 22
Provided by: sec212
Category:

less

Transcript and Presenter's Notes

Title: AGGREGATE


1
AGGREGATE
Aggregates may be NATURAL or MANUFACTURED Natural
aggregates sand, gravel, crushed
rock Manufactured aggregates blast furnage slag
Aggregates may also be COARSE or FINE or
FILLER Coarse aggregates gt 4.76mm Fine
aggregates 0.075mm 4.76mm Filler lt 0.075mm
2
COARSE AGGREGATEproperties
Strength (kekuatan) and toughness
(kekerasan) Particle shape Porosity Surface
texture Surface coatings Specific
gravity Gradation
3
FINE AGGREGATEproperties
Hard Non-plastic (clean free from organik
materials) Gradation Salt content
4
Strength and toughness
  • - to prevent breakdown under traffic and
    subsequent loss of stability
  • no truly satisfactory test to measure the
    effective strength and toughness
  • Measured by abrasion test using the Los Angeles
    Machine

5
Particle shape
  • - to provide aggregate interlock and stability of
    mixture
  • Crushed aggregates give a better interlocking
    than rounded gravels
  • Rounded gravels produce a more highly stable
    surface mixture than crushed aggregates. (adhesi
    antara agregat dan aspal agregat bulat lebih baik
    daripada batu pecah)
  • Thin and elongated aggregates are being subject
    to size segregation in the mixing process and
    tend to be of low strength.

6
Porosity
  • - Porosity gives a proper adhesion between
    aggregate and bitumen
  • Porosity affects the economic of mixture
  • High porosities cause more bitumen will be
    absorbed into the aggregate (desired around 0.5
    of bitumen is absorbed into aggregate)
  • High porosities generally do not affect the
    quality of mixture. It could be noted that if
    more bitumen is absorbed into aggregate this will
    leave a hard residue on the surface of aggregate
    particle and then lead to raveling and stripping.

7
Surface texture
  • The rougher the surface texture of aggregate
    gives the higher the stability and durability
  • A rough aggregate surface reduces the
    displacement under pavement loading and then
    increases the stability of mixture
  • Is important to adhesion between aggregate and
    bitumen. This will increase the durability of
    mixture

8
Surface coatings
  • Aggregate may be coated by clay, silt, calcium
    carbonat, iron oxides, gypsum and other subtances
    in varying thiskness and hardness.
  • Surface coatings has responsible for aggregate
    stripping due to disturb the bitumen to seal the
    aggregate

9
Specific gravity
Specific gravity is importand for mixture
calculation such as to determine the void content
of the compacted bituminous mixture
  • 3 (Three) types of aggregate specific gravity
  • Bulk specific gravity (Graviti spesifik bulk)
  • SSD (Saturated Surface Dry) specific gravity
    (Graviti spesifik kering permukaan jenuh)
  • Apparent specific gravity ( Graviti spesifik
    semu)
  • There is also known effective specific gravity.
    It is used to estimate the amount of bitumen
    absorbed by aggregate

10
Specific gravity
Bulk specific gravity perbandingan antara berat
kering agregat dan volume total agregat
SSD specific gravity perbandingan antara berat
agregat kondisi permukaan jenuh dan volume total
agregat
Apparent specific gravity perbandingan antara
berat kering agregat dan volume kedap air agregat
Effective specific gravity perbandingan antara
berat kering agregat dan volume kedap aspal
agregat
11
Volume of aggregate to calculate Specific gravity
Volume agregat tanpa pori/ solid (Vs)
Volume agregat kedap air/ impermeable (Vi)
Volume agregat rembes air/ permeable (Vp)
Volume total agregat (V)
Volume agregat rembes aspal (V-Vs-Vi-Vp)
12
Measuring Specific gravity
Diukur Ws berat kering partikel agregat ?w
berat volume air Bk berat agregat kering Ba
berat agregat di dalam air Bj berat agregat
jenuh air (SSD)
Vi
Vp
Vs
Ws
Bk
Bulk SG

(VsViVp)/?w
Bj - Ba
Ws
Bj
Vs
SSD SG

(VsViVp)/?w
Bj - Ba
13
Measuring Specific gravity
Diukur Ws berat kering partikel agregat ?w
berat volume air Bk berat agregat kering Ba
berat agregat di dalam air Bj berat agregat
jenuh air (SSD)
Vi
Vp
Ws
Bk
Vs
Apparent SG

(VsVi)/?w
Bk - Ba
Bulk SG App SG
Estimasi Effective SG
2
14
Gradation
Gradation is size distribution of aggregate
particles Gradation can be assessed by sieve
analysis
15
Aggregate specification
Specification for aggregate is some requirements
that to be fulfilled by aggregate properties to
ensure the performance of bituminous mixture For
examples Item
Requirement Apparent Specific gravity
min 2.50 Absorption
max 3.0 Abrasion loss
max 35 Elongated and flat particles
max 25 Soundness loss max
12
16
Sieving analysis
No saringan Berat tertahan (g) tertahan lolos
¾ 0 0 100
½ 89.2 4.3 95.7
3/8 159.7 7.7 88.0
No.4 238.5 11.5 76.5
No.8 311.1 15.0 61.5
No.16 300.7 14.5 47.0
No.30 398.2 19.2 27.8
No.50 327.7 15.8 12.0
No.100 149.3 7.2 4.8
No 200 16.6 0.8 4.0
Pan 83.0 4.0
Total 2074.0 100


2 1/2 inch (63 mm)
2 inch (50 mm)
1 1/2 inch (37.5 mm)
1 inch (25 mm)
3/4 inch (19 mm)
1/2 inch (12.5 mm)
3/8 inch (9.5 mm)
No.4 (4.75 mm)
No.8 (2.36 mm)
No.16 (1.18 mm)
No.30 (0.6 mm)
No.50 (0.3 mm)
No.100 (0.015 mm)
No.200 (0.0075 mm)
17
Making gradation curve
No saringan No saringan lolos
¾ 19 mm 100
½ 12.5 mm 95.7
3/8 9.5 mm 88.0
No.4 4.75 mm 76.5
No.8 2.36 mm 61.5
No 10 2.00 mm 57.5
No.16 1.18 mm 47.0
No.30 0.6 mm 27.8
No.50 0.3 mm 12.0
No.100 0.015 mm 4.8
No 200 0.0075 mm 4.0
18
Type of gradation
GAP GRADED
UNIFORMLY GRADED
WELL GRADED
19
Finer or coarser aggregate
Agregat semakin halus (finer)
20
Blending two aggregates (1)
Sieve no Grad A Grad B Specification Mean spec (target gradasi)
2 in 100 100 100 100
1.5 in 100 95 90 100 95
¾ in 63 85 65 80 72.5
No 4 25 50 30 45 37.5
N0.10 15 36 20 35 27.5
No 200 3 7 0 5 2.5
21
Blending two aggregates metode grafis (2)
B 63
Hasil blending A B 37 63
1.5 in
3/4 in
No 4
No 10
No 200
A 37
Write a Comment
User Comments (0)
About PowerShow.com