Most Frequently Cited Serious Violations - PowerPoint PPT Presentation

Loading...

PPT – Most Frequently Cited Serious Violations PowerPoint presentation | free to download - id: 5a0b0-ZDc1Z



Loading


The Adobe Flash plugin is needed to view this content

Get the plugin now

View by Category
About This Presentation
Title:

Most Frequently Cited Serious Violations

Description:

Rigging equipment lifting accessories Marked & tested. Exterior drop chutes ... Training prior to truck operation. Operator Training Formal, practical ... – PowerPoint PPT presentation

Number of Views:45
Avg rating:3.0/5.0
Slides: 25
Provided by: OETD
Learn more at: http://asahouston.org
Category:

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: Most Frequently Cited Serious Violations


1
Most Frequently Cited Serious Violations
  • Construction FY 2007

2
Most Frequently Cited Serious Violations in
Construction FY 2007
Fall protection Residential construction 6 or
more
Fall protection - Unprotected sides edges
Head protection
Scaffolds - Fall protection
Aerial Lifts - Body belt and lanyard
Standard Subpart - 1926.
Fall hazards training program
Portable ladders 3 feet above landing surface
-
Scaffolds - Access
Scaffolds - Platform construction
Training for employees using scaffolds
There were also 359 Section 5(a)(1) violations
cited in construction SIC codes (1500 1799)
during this period.
3
Subpart C - General Safety Health (1926.20 - 35)
Employee training programs
Initiate and maintain accident prevention programs
Inspections by competent person
Housekeeping
Personal protective equipment Employer
responsibility
4
Subpart D - Occupational Health Environmental
Controls (1926.50 - 66)
First aid training
Lead - Exposure assessment
  • Lead Interim respiratory protection

Exposure to air contaminants
Lead Interim personal protective clothing
equipment
Lead Interim training
5
Subpart E - Personal Protective Life Saving
Equipment (1926.95 - 107)
Head protection
Eye face protection
PPE - Provided, used maintained
Life jackets/vests
Required eye face protection ANSI requirements
6
Subpart F - Fire Protection Prevention (1926.150
- 159)
2A fire extinguishers - Building area
Flammable/combustible liquids Approved
containers
Extinguishers on each floor
Extinguishers within 50 ft. of flammables/combusti
bles
Storage of LPG containers
7
Subpart G - Signs, Signals Barricades (1926.200
- 203)
Traffic control signs/devices - Requirements
Flaggers Proper signaling by use of
Traffic signs at points of hazard
Barricades - Requirements
Visible signs symbols
8
Subpart H - Materials Handling, Storage, Use
Disposal (1926.250 - 252)
  • Rigging equipment inspection removal from
    service

Exterior drop chutes
Torn/cut synthetic web slings - Removal from
service
Synthetic web slings - Removal from service
Rigging equipment lifting accessories Marked
tested
9
Subpart I - Tools Hand Power (1926.300 - 307)
  • Woodworking tools - ANSI requirements

Tools designed for guards - Guards in place
Guarding of rotating/moving parts
Guarding of ripsaws
Guarding of portable circular saws
10
Subpart J - Welding Cutting (1926.350 -354)
  • Cylinders secured upright

Oxygen cylinder storage
Use of device to keep cylinders steady while in
use
Cables needing repair
Fire extinguishing equipment in area
11
Subpart K - Electrical (1926.400 - 449)
Grounding path
  • Ground fault protection

Equipment installation use
Flexible cords Strain relief
Worn/frayed cords or cables
12
Subpart L - Scaffolds (1926.450 - 454)
  • Scaffolds above 10 ft. - Fall protection

Aerial lifts - Body belt lanyard
Scaffold access
Scaffold platform construction
Training for employees using scaffolds
13
Subpart M - Fall Protection (1926.500 - 503)
Fall protection - Residential construction 6 or
more
Fall protection - Unprotected sides edges
Fall hazards training program
Fall protection - Roofing work on low-slope roofs
Fall protection Steep roofs
14
Subpart N - Cranes, Derricks, Hoists, Elevators
Conveyors (1926.550 - 556)
Cranes and derricks Manufacturers
specifications
Swing radius at rear of crane barricaded
Clearances between power lines equipment
ANSI Requirements
Employees kept clear of loads
15
Subpart O - Motor Vehicles, Mechanized Equipment,
Marine Operations (1926.600 - 606)
Industrial trucks - ANSI B56.1-1969
  • Earthmoving/compacting equipment - Reverse signal
    alarm

Lifting/hauling equipment - Use of safety platform
Industrial trucks Unauthorized personnel
Bi-directional machines - Horn
16
Subpart P - Excavations (1926.650 - 652)
Employee protection in excavations - Protective
system use
Egress from trench excavations
Inspections by competent person
Protection from falling/rolling
materials/equipment
Competent person inspection - Employees removed
from hazard
17
Subpart Q - Concrete Masonry Construction (1926.
700 - 706)
  • Reinforcing steel - Guarding

Masonry walls - Bracing
Masonry walls Limited access zone prior to start
Formwork Drawings/plans available on jobsite
18
Subpart R Steel Erection (1926.750 - 761)
  • Protection from fall hazards

Fall hazard training
Fall protection for connectors 15 to 30
Fall protection for connectors More than 2
stories or 30
Controlled Decking Zone designated marked
Fall protection equipment Conform to 1926.502
19
Subpart T - Demolition (1926.850 - 860)
  • Engineering survey - Prior to operations

Chutes No material dropped outside structure
unless protected
Floor openings covered
Floor openings Curbs or stop-logs
Inspections by competent person
20
Subpart X - Ladders (1926.1050 - 1060)
Portable ladders 3 feet above landing surface
  • Stairrails handrails

Training program
Appropriate use of ladders
Top of stepladder improperly used
21
Subpart Z - Toxic Hazardous Substances (1926.110
0 - 1152)
Asbestos - Class I, II, III asbestos work in
regulated areas
  • Asbestos - Exposure assessment by competent person

Asbestos - Training program
Asbestos Identify AMC/PACM before work
Asbestos - Monitoring
Asbestos-containing material/Presumed
asbestos-containing material
22
Respiratory Protection (1910.134) Cited in
Construction SIC Codes
Written respiratory protection program
  • Medical evaluation to determine employees
    ability to use respirator

Evaluation of respiratory hazards
Standard 1910.
Qualitative or quantitative fit testing
Employee demonstration of knowledge of respirator
23
Powered Industrial Truck Operator Training
1910.178(l) Cited in Construction SIC Codes
Operator competency
Training prior to truck operation
Operator certification
Standard 1910.
Operator Training Formal, practical
performance
24
Hazard Communication (1910.1200) Cited in
Construction SIC Codes
  • Written program

Information training
Material Safety Data Sheets readily accessible
Standard 1910.
Material Safety Data Sheets
Training initially for new hazards
About PowerShow.com