The LHCb DAQ and Trigger Systems: recent updates - PowerPoint PPT Presentation

About This Presentation
Title:

The LHCb DAQ and Trigger Systems: recent updates

Description:

in various channels, differing sensitivity to new physics: Time-dependent CP asymmetry of Bs Ds-K and Ds K ... Farm for a full software High Level Trigger. ... – PowerPoint PPT presentation

Number of Views:35
Avg rating:3.0/5.0
Slides: 17
Provided by: hepexp
Category:

less

Transcript and Presenter's Notes

Title: The LHCb DAQ and Trigger Systems: recent updates


1
The LHCb DAQ and Trigger Systems recent updates
  • Ricardo Graciani
  • XXXIV International Meeting on Fundamental
    Physics.

2
Overview
  • LHCb
  • The Original Design
  • Trigger Rate
  • From 200 Hz to 2000 Hz
  • Level 1 suppression
  • 1 MHz Readout
  • Outlook

3
LHCb
  • LHC
  • 40 MHz crossing rate
  • 30 MHz with bunches from both directions
  • Luminosity 21032 cm-2 s-1
  • 10 to 50 times lower than _at_ ATLAS, CMS
  • One Arm Forward Spectrometer
  • LHCb rates
  • (for visible events ? at least 2 tracks in
    acceptance)
  • Total rate (minimum bias) 10 MHz
  • bb 100kHz
  • Whole decay of one B in acceptance 15kHz
  • cc 600kHz

4
The Spectrometer
5
LHCb Physics Program
  • Bs oscillation frequency, phase and ?Gs
  • Bs?Ds?, J/?F, J/??, ?cF
  • ? from Bd??0??
  • ? with Bd?J/?KS as a proof of principle
  • And ? from b?s penguin
  • ? in various channels, differing sensitivity to
    new physics
  • Time-dependent CP asymmetry of Bs?Ds-K and DsK-
  • Time dependent CP asymmetries of Bd?pp- and Bs ?
    KK-
  • Comparison of decay rates in the
    Bd?D0(Kp-,K-p,KK-)K0 system
  • Comparison of decay rates in the
    B-?D0(Kp-,Kp-pp-)K- system
  • Dalitz analysis of B- ? D0(KSp-p)K- and Bd ?
    D0(KSp-p)K0
  • Rare decays
  • Radiative penguin Bd ? K g, Bs ? F g, Bd ? ?g
  • Electroweak penguin Bd ? K0 mm-
  • Gluonic penguin Bs ? FF, Bd ? FKs
  • Rare box diagram Bs? mm-
  • Bc , b-baryon physics unexpected !

6
The LHCb TP
HLT
7
From 200 to 2000 Hz
  • Initial Design
  • 200 Hz of partial or fully reconstructed B final
    States.
  • Exclusive B Trigger.
  • Limitations
  • Strong MC dependence
  • Efficiency determination
  • Detector Performance (vertex, proper time, PID)
  • Backgrounds
  • Huge MC samples are necessary.
  • Conclusion
  • Review strategy
  • Use real Data for the above studies
  • Re-evaluation of Computing needs
  • Factor 10 reduction on MC needs
  • Factor 10 increase on Trigger rate

8
2 kHz Trigger Output
Output rate Trigger Type Physics Use
200 Hz Exclusive B candidates Specific final states
600 Hz High Mass di-muons J/?, b?J/?X
300 Hz D Candidates Charm, calibrations
900 Hz Inclusive b (e.g. b?m) B data mining
  • Best guess at present (split between streams
    still to be determined)
  • Exclusive reconstruction is kept
  • Large inclusive streams to be used to control
    calibration and systematics (trigger, tracking,
    PID, tagging,)
  • 10-15 acceptance for any channel on inclusive
    samples.

9
Cost Estimate
200Hz 2000Hz
Hoffman 2007 Now 2008
CERN CPU(MSI2k) 2.0 0.9
CERN Disk(PB) 0.3 0.8
CERN Tape(PB) 1.2 1.4
Tier-1s CPU(MSI2k) 8.3 4.4
Tier-1s Disk(PB) 1.6 2.4
Tier-1s Tape(PB) 0.75 2.1
Tier-2s CPU(MSI2k) - 7.6
Tier-2s Disk(PB) - 0.02
Relative Cost Relative Cost 1.0 0.91
10
DAQ Architecture
11
The old System
  • Detector L0 boards
  • talk Gb Ethernet
  • implement buffer to allow for Level 1 latency
  • Two Data Streams
  • Level-1 trigger with latency limit of 58 ms _at_1
    MHz
  • 3.8 kB/event ? 4.3 GB/sec
  • HLT traffic without latency limitations _at_ 40 kHz
  • 30 kB/event ? 1.2 GB/s

12
1 MHz DAQ
13
Advantages
  • Major simplification of the DAQ system
  • Only one data flow through the system
  • Elimination of the SFCs
  • Event-Building in each CPU node
  • Elimination of the Level-1 decision sorter
  • No latency limitations for event processing
  • Well suited for multi-core CPU architectures
  • For the Trigger software
  • ALL information available at all times in full
    precision and full granularity
  • Better trigger efficiency
  • Required Switching power 60 GB/s

14
The Hardware Candidate
  • Force10 equipment
  • Port densities
  • Biggest switch has 14 slots for line-cards
  • Biggest port density is 90 Gb Ethernet ports per
    line-card (90/48 over-committed)
  • 1490 1260 GbEthernet ports
  • Switching Fabric
  • Switching capacity is
  • raw 1.6 Tb/sec,usable 1.2 Tb/sec (150 GB/s)

15
Reviewed HLT Strategy
16
Outlook
  • LHCb had a very scalable and flexible DAQ schema.
  • LHCb Trigger includes inclusive samples
  • HLT rate from 200 to 2000 Hz.
  • High-mass di-muon
  • D
  • Inclusive b
  • Full L0 rate (1 MHz) sent to Online Filter Farm
    for a full software High Level Trigger.
  • Review Vertical Trigger strategy for HLT.
Write a Comment
User Comments (0)
About PowerShow.com