Power Factor Correction in Switch Mode Power Supplies - PowerPoint PPT Presentation

1 / 15
About This Presentation
Title:

Power Factor Correction in Switch Mode Power Supplies

Description:

Application of SMPS as an electronic ballast ... M. Bairanzade, 'Electronic Lamp Ballast Design,' Application Note, Motorola, 1995. ... – PowerPoint PPT presentation

Number of Views:560
Avg rating:3.0/5.0
Slides: 16
Provided by: clintonli
Category:

less

Transcript and Presenter's Notes

Title: Power Factor Correction in Switch Mode Power Supplies


1
Power Factor Correction in Switch Mode Power
Supplies
  • Using the SiC Schottky Diode

2
Team
  • Team Leader
  • Robin Kelley
  • Team Members
  • Travis Brignac
  • Clinton Livingston
  • Advisor
  • Dr. Mazzola

3
Abstract
  • Design a switch mode power supply with a new
    power factor correction circuit, which implements
    the SiC Schottky diode.
  • Application of SMPS as an electronic ballast
  • Issue Application Note detailing use of the SiC
    Schottky diode in power factor correction

4
Comparison Si pn vs. SiC Schottky
  • Reverse biased pn junction diode does not turn
    off fast enough during switching
  • This is due to the removal of excess carries from
    the depletion region
  • Causes reverse recovery transient
  • SiC Schottky diodes do not need to remove excess
    carries from the depletion region
  • Eliminates reverse recovery transient.
  • Allows for higher operating frequencies

5
System / Hardware
120V AC
6
EMI Filter / AC Rectifier
7
Waveforms
8
Power Factor Correction
9
DC-AC Inverter
10
Inverter Simulation Results
11
Prototype Results
Lamp Voltage f200kHz
Resistive Load f100kHz
12
Constraints vs Results
13
Current / Future Work
  • Debugging Stage of PFC
  • Second Design Phase of Inverter Circuit
  • Integrate major circuits
  • Final Testing

14
Questions?
15
References
  • 1 H. Kapels, I. Zverev, R. Rupp, and L. Lorenz,
    SiC Schottky diodes A Milestone in hard
    switching applications, Application Note,
    Infineon Technologies, 2001.
  •  
  • 2 Marco Scherf and Ilia Zverev, 200W SMPS
    Demonstration Board, Application Note, Infineon
    Technology, v1.2, November 2001.
  •  
  • 3 M. Bairanzade, Electronic Lamp Ballast
    Design, Application Note, Motorola, 1995.
  •  
  • 4 SWITCHMODE Power Supplies Reference Manual
    and Design Guide, Manual, ON Semiconductor,
    Rev.3, July 2002.
  •  
  • 5 Infineon Technologies Produces Worlds first
    Power Semiconductors in Silicon Carbide,
    http//www.infineon.com/news/press/102-019e.htm,
    Infineon Technologies AG, Muenchen,Germany,
    February 5, 2001
  •  
  • 6 C. Miesner, R. Rupp, H. Kapels, M. Krach, and
    I. Zverev, thinQ! Silicon Carbide Schottky
    Diodes An SMPS Circuit Designers Dream Comes
    True!, Technical White Paper, Infineon
    Technology, Infineon Technologies AG, September,
    2001.
  •  
  • 7 Ming Hian Chew, Design of Power Factor
    Correction Circuit Using GreenlineE Compact Power
    Factor Controller MC33260, Application Note for
    AND8016/D, ON Semiconductor, June 2002.
  •  
  • 8 Product Information E2/32IS-120 Two Lamp
    Operation, 120V, Howard Industries, Inc.,
    February 2001.
  •  
Write a Comment
User Comments (0)
About PowerShow.com