Installing SME Version 5 - PowerPoint PPT Presentation


PPT – Installing SME Version 5 PowerPoint presentation | free to download - id: 1ce226-ZDc1Z


The Adobe Flash plugin is needed to view this content

Get the plugin now

View by Category
About This Presentation

Installing SME Version 5


Installing SME Version 5. 1)Set the computer to boot from the ... 15)Remove the CD while the system is shutting down. 16)Remove the boot floppy. 17)Wait... – PowerPoint PPT presentation

Number of Views:11
Avg rating:3.0/5.0
Slides: 12
Provided by: area5learn
Learn more at:


Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: Installing SME Version 5

Installing SME Version 5
  • 1)Set the computer to boot from the CDRom by
    changing the BIOS setting.
  • 2)Startup the computer with the CD in the CD
  • 3)Type "accept" (without quotes) at the boot
  • 4)Press Enter
  • 5)Wait. For the "Welcome to the e-smith server
    and gateway" message and the "Service LINK
    License Agreement"

Install Cont.
  • 6)Tab to the "ACCEPT" choice and press Enter
  • 7)Select (up/down arrow) "Install using Single
    Hard Drive (tab to choice)
  • 8)Tab to "OK" and press Enter
  • 9)Type "proceed" at the prompt
  • 10)Tab to the "OK" choice and press Enter
  • 11)Wait. (for formatting, file transfer, etc.)

Install Cont.
  • 12)When prompted to create a Boot Diskette,
    insert a diskette in the drive and type press
    Enter to select "Yes"
  • 13)Press Enter to select "OK"
  • 14)Press Enter and be ready to eject the CD.
  • 15)Remove the CD while the system is shutting
  • 16)Remove the boot floppy.
  • 17)Wait for the reboot process to complete.

Configuring the SME5 Server
  • 1)When prompted for the admin password, type in a
    password, press Enter
  • 2)Retype the password, press Enter
  • 3)Tab to "Yes" press Enter
  • 4)Enter a valid IP Address from your local
    network for the domain name.
  • 5)Tab to "next" and press Enter

Configure Cont.
  • 6)Type in a server name (i.e. SME5, e-smith,
    etc.) tab to "Next", press Enter
  • 7)Confirm that your Ethernet card has been
    detected. Press Enter to select.
  • 8)Enter the IP Address you used for the domain
  • 9)Tab to "Next" and press Enter

Configure Cont.
  • 10)Enter the subnet mask for your network
  • 11)Tab to "Next" and press Enter
  • 12)Operation Mode arrow down to option 3 (Server
    Only) , tab to "Next", Press Enter
  • 13)Gateway Enter your gateway IP address
    (router, Ethernet port, firewall, etc.)
  • 14)Tab to "Next" press Enter

Configure Cont.
  • 15)DHCP OFF - Arrow down to OFF, tab to "Next"
    press Enter
  • 16)DNS Leave blank, tab to "Next" press Enter
  • 17)Proxy NO - tab to "Next" press Enter
  • 18)Status to e-smith NO press Enter
  • 19)Console Login arrow down to login, tab to
    "Next" press Enter

Configure Cont.
  • 20)Notify by email, press Enter
  • 21)Activate Configuration YES press Enter
  • 22)Wait.. for reboot.
  • 23)Login "admin" Enter
  • 24)Your password Enter
  • 25)Arrow down to "Test Internet Access" press

Configure Cont.
  • 26)Wait for "Success" or "Unsuccessful" message.
  • 27)IF unsuccessful, check ethernet connection,
    card acceptability, IP gateway, IP of server.
  • 28)Arrow down to Shutdown and select shutdown.
  • 29)Power off.

UpDating the SME5 Server
  • (Currently, skip the next 2 slides for SME
  • Through a web browser enter your IP
    address/server-manager in the URL address space
    and press enter.
  • Login as admin
  • Enter your server password

Updating Cont.
  • Scroll down to Administration and click on the
    selection Blades
  • Click install on the supported Blades
  • (You should install each supported Blade)
  • Click yes to the license agreements
  • Wait for completion message.
  • It will take a few minutes, be patient and only
    click once.