New Holland Workmaster™ 33 Workmaster™ 37 Compact Tractor Operator’s Manual Instant Download (Publication No.47832587)

1
OPERATORS MANUAL
ORIGINAL INSTRUCTIONS
Workmaster 33 Workmaster 37 Compact Tractor
Part number 47832587 1st edition English July 2015
2
Contents

• GENERAL INFORMATION
• Note to the Owner . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . 1-1
• Intended use. . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . 1-2
• Electro-magnetic compatibility (EMC) . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . 1-4
• Manual scope and required training level . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . 1-5
• Metric and imperial units abbreviations. . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . 1-6
• Product identification . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . 1-8
• Operator's manual storage . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . 1-8
• Machine orientation. . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . 1-9
• Exhaust Gas Recirculation (EGR) - Diesel
  Particulate Filter (DPF) exhaust treatment -
  Product overview . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . 1-10
• SAFETY INFORMATION
• Precautionary statements . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . 2-1
• Safety rules . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . 2-2
• Do not operate tag. . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . 2-9
• Roll Over Protection Structure (ROPS) . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . 2-10
• Ecology and the environment . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  2-11
• Safety signs . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . 2-12
• Instructional signs . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . 2-24

3
LEFT-HAND SIDE CONTROLS Transmission range lever.
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 3-24 Park brake . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
3-25 Four wheel drive (4WD) lever . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
3-26 Mid Power Take Off (PTO) lever - optional .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
3-27 RIGHT-HAND SIDE CONTROLS Hydraulic power
lift (HPL) . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 3-28 Rear
remote control valve(s) - optional . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 3-29 Mid mount two
spool control valve . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 3-30 Transmission main
shift lever. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 3-32 EXTERIOR
CONTROLS Hood release latch . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 3-33 4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT Engine break-in procedure
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 4-1 Diesel Particulate
Filter (DPF) regeneration. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 4-2 Power Take-Off (PTO) operation
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . 4-8 Three-point linkage . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 4-10 Attaching three-point
equipment . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 4-11 Extendible drawbar . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4-14 Hydraulic lift
rocker . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
4-15 Hydraulic Power Lift (HPL) drop rate control
valve . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4-16 STARTING THE
UNIT Key switch . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 4-17 Cold starting aids . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 4-18 Starting
the engine . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
4-19 Starting the tractor with jumper cables . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
4-22 STOPPING THE UNIT Stopping the engine . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 4-23 Emergency
stopping. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
4-24 Brakes . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 4-25 MOVING THE
UNIT Steering wheel adjustment . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. 4-27 Steering operation . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 4-28 Transmission operation at low
ambient temperatures. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
4-29 Hydrostatic Transmission (HST) operation . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 4-30 12 x 12
Synchronized transmission operation. . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 4-32
4
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com
5

• PARKING THE UNIT
• Brakes and controls - Park . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . .
  4-34
• TRANSPORT OPERATIONS ROAD TRANSPORT
• External lighting - Identification . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  5-1
• Hazard warning light operation . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . 5-2
• Turn signal operation . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . 5-3
• Road lights operation . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . 5-4
• Work lights operation . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . 5-5
• Rear work light (optional) . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . 5-6
• Driving the vehicle . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . 5-7
• SHIPPING TRANSPORT
• Carrying the tractor on a transporter . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . 5-8
• RECOVERY TRANSPORT
• Towing . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . 5-8
• WORKING OPERATIONS GENERAL INFORMATION

6
Pre-fuel filter . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 7-15 Fuel filter. . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
7-16 Hydraulic oil filter . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 7-17 Hydrostatic (HST) oil filter
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 7-17 Roll Over Protective
Structure (ROPS). . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 7-18 Wheels bolt/nut . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 7-19 Every 50
hours Grease fittings . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 7-20 Transmission fluid level.
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 7-22 Clutch pedal free
play . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . 7-23 Brake
pedal free play . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
7-24 Hydrostatic transmission (HST) neutral
adjustment . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . 7-25 Engine belts .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
7-27 Tires and wheels . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . 7-28 Front axle differential oil
level . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 7-30 Air cleaner - outer
element . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 7-31 Every 100
hours Fuel filter. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 7-32 Every 300
hours Engine oil and filter . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 7-33 Hydraulic filter . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 7-33 Hydrostatic
(HST) oil filter - HST system . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 7-33 Pre-fuel filter . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
7-33 Engine belts . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . 7-33 Wheels bolt/nut . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 7-33 Air
cleaner outer element. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
7-34 Every 500 hours Fuel filter. . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
7-35 Every 600 hours Front axle differential
fluid . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . 7-36 Transmission
fluid . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
7-38 Every 1000 hours Air cleaner inner element
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 7-39 Engine coolant . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
7-40 General maintenance Fuel injection system -
Bleed . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 7-42 Hydrostatic
transmission (HST) neutral adjustment . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . 7-44 Engine belts . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 7-44 Roll Over Protective
Structure (ROPS) frame - Replace - Possible
damage . . . . . . . . . 7-44
7

• Battery . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . 7-44
• Alternator . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . 7-45
• Fuses . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . 7-46
• Main fuses . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . 7-47
• Headlight bulb . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . 7-48
• Tail/brake light bulb . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . 7-49
• Turn signal/hazard light bulb . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . .
  7-50
• Wheels bolt/nut . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . 7-51
• Front wheels toe-in . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . 7-51
• Brake pedal free play . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . 7-51
• Clutch pedal free play . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . 7-51
• STORAGE
• Storing the tractor . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  7-52
• Removal of tractor from storage . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . 7-53
• TROUBLESHOOTING SYMPTOM(S)
• Engine - Troubleshooting . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . 8-1
• Clutch - Troubleshooting . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . . . . . . . . . . . . . 8-2
• Mechanical service brakes - Troubleshooting . . .
  . . . . . . . . . . . . . . . . . . . . . . . . .
  . . . . . . 8-2

8
1 - GENERAL INFORMATION 1 - GENERAL
INFORMATION Note to the Owner This manual
contains information concerning the adjustment
and maintenance of your new equipment. You have
purchased a dependable machine, but only by
proper care and operation can you expect to
receive the performance and long service built
into this equipment. Please have all operators
read this manual carefully and keep it available
for ready reference. Your NEW HOLLAND dealer will
instruct you in the general operation of your new
equipment. (Refer to the 'Delivery Report' at the
back of this manual.) Your dealer's staff of
factory-trained service technicians will be glad
to answer any questions that may arise regarding
the operation of your machine. Your NEW HOLLAND
dealer carries a complete line of genuine NEW
HOLLAND service parts. These parts are
manufactured and carefully inspected to insure
high quality and accurate fitting of any
necessary replacement parts. Be prepared to give
your dealer the model and product identification
number of your new equipment when ordering parts.
Locate these numbers now and record them below.
Refer to the 'General Information' section of
this manual for the location of the model and
product identification numbers of your
machine. PLEASE RECORD THE FOLLOWING
INFORMATION Model Product Identification Number
(PIN) Date Purchased Engine Model Engine PIN
This is the safety alert symbol. It is used with
and without signal words to alert you to
potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible death or injury.
WARNING Illustrations in this manual may show
protective shielding open or removed to better
illustrate a par- ticular feature or
adjustment. Replace all shields before operating
the machine. Failure to comply could result in
death or serious injury. W0012A IMPROVEMENTS CN
H America LLC is continually striving to improve
its products. We reserve the right to make
improvements or changes when it becomes practical
and possible to do so, without incurring any
obligation to make changes or addi- tions to the
equipment sold previously.
1-1
9
1 - GENERAL INFORMATION
Intended use INTENDED USE OF YOUR TRACTOR Your
tractor is designed to power and propel itself.
The tractor is intended for agricultural use to
pull or carry at- tachments or load and move
materials when equipped with a front end loader
with a variety of bucket sizes, within some
physical limits. The working speed and per-
formance may depend on a number of various
parame- ters, such as weather and terrain
conditions. Though the tractor is designed to
perform in combination with a vari- ety of
equipment in most crops and conditions, there may
be a number of combinations of above parameters,
for which there is severe degradation of
performance of the tractor and/or its mounted or
trailed equipment. If you no- tice degradation of
performance, contact your dealer for assistance.
He may have useful information for improve-
ments, or a kit may be available to enhance the
perfor- mance.

• Do not use the tractor in combination with
  equipment, without having consulted the specific
  Operators Manual provided with the equipment.
  The tractor is a universal tool to carry, tow,
  and drive a variety of equipment. This manual
  alone cannot provide you with all the informa-
  tion required for the safe operation of the
  combination.
• Do not use the tractor beyond its limits of
  dynamic sta- bility. High speed, abrupt
  maneuvers, and fast and short cornering will
  increase the risk of roll-over.
• Do not use the tractor for pulling work, in cases
  where you do not know whether the load will
  yield, for instance when pulling stumps. The
  tractor may flip over when the stump is not
  yielding.
• Be cautious that the center of gravity of the
  tractor may increase when loads on the front-end
  loader or the three-point linkage are raised. In
  these conditions, the tractor may roll-over
  earlier than expected.
• Do not step down from the tractor without
  shutting down the PTO, shifting the transmission
  to park or neutral and applying the park brake,
  unless continued PTO opera- tion is required for
  some equipment, such as pumps or wood chippers.
  The latter equipment may have an emergency stop
  device on the equipment itself, as hu- man
  intervention is needed during operation. But
  other equipment, engaged and driven by the
  tractor will have no means to stop the power
  transmission, other than the PTO clutch of the
  tractor.
• You shall take the necessary precautions to
  always be aware of the possible presence of
  bystanders, certainly when maneuvering in
  confined areas, such as the farm yard and sheds.
  Keep people away from the tractor during work
  ask bystanders to leave the field. There is not
  only the risk to be overrun by the tractor, but
  ob- jects ejected by some equipment mounted on
  the trac- tor, such as a rotary mower, may cause
  harm. Stones may be thrown further than the
  mowed crop. Pay the necessary attention while
  operating next to public roads or footpaths.
  Thrown objects can get projected out- side the
  field and hit unprotected people like bikers or
  pedestrians. Wait to cut the edge of the field
  till it is clear of bystanders.
• Do not allow riders on the tractor do not allow
  people standing on the access way or step to the
  cab when the tractor is moving. Your view to the
  left will be ob- structed and a rider risks to
  fall from the tractor during unforeseen or
  abrupt movements.
• Always stay clear from implements operating area
  and especially do not stand between tractor and
  trailed ve- hicle either three-point linkage
  when operating lift con- trols ensure no
  bystanders are near these operating areas.
• Certain functions of your tractor, if equipped
  with a CVT transmission, are controlled by
  software and some of them are safety related. Do
  not attempt to modify or download software from
  spurious sources. Settings and logics may be
  destroyed and affect seriously the

• Do not use the tractor for another purpose than
  in- tended by the manufacturer and outlined in
  this man- ual.
• Do not use the tractor beyond its limits of
  terrain gradi- ent and stability as outlined
  further in this manual. Us- ing the tractor
  beyond these limits may result in roll-over or
  tip-over. Observe the recommendations in this
  man- ual.
• Do not use the tractor on higher speeds than
  allowed by the load and the environment. A wet
  surface or other low adherence conditions may
  increase the braking dis- tance or result in
  vehicle instability. Always adapt your traveling
  speed according to the load of the vehicle and
  the characteristics of the road.
• Do not use the tractor near or on soft verges of
  canals and brooks or banks and verges that are
  undermined by rodents. The tractor may sink
  sideways and roll- over.
• Do not use the tractor on brittle bridge heads
  and poor bridge floors. These constructions may
  collapse and cause roll-over of the tractor.
  Always check out the condition and carrying
  capacity of bridges and ramps prior to engage.
• Do not use the tractor without wearing the seat
  restraint system during activities where
  roll-over or tip-over haz- ards exist. The ROPS
  cab or ROPS structure will only be fully
  effective when the driver remains attached to
  his seat.
• Do not use equipment mounted on the tractor which
  is not correctly matching and firmly fixed. Such
  equip- ment may increase the risk for roll-over
  and hit the trac- tor when coming loose. Ensure
  that the dimensions of the three-point linkage
  interface of both the tractor and the equipment
  are matching according to the cate- gories
  defined in ISO 730. Ensure that the dimensions
  and speed of the PTO shaft on the tractors are
  match- ing those of the equipment.

1-2
10
1 - GENERAL INFORMATION

• function of the tractor. This may result in
  unpredictable and unsafe behavior of the tractor.
  Only your dealer is entitled to intervene on the
  software of the tractor. He has the appropriate
  tools and data sets for it and owns the
  officially released software versions and updates
  for your tractor.
• Your tractor may be equipped with a number of
  sensors to control safety functions. Tripping
  these sensors will result in a safe operation
  mode. Do not attempt to by- pass any function on
  the tractor. You will be exposed to serious
  hazards, and moreover, the behavior of the
  tractor may become unpredictable.
• A tractor has only one operator station and is a
  one man operated vehicle. Other people on or
  around the tractor during normal operation are
  not allowed.
• The machine is designed and produced exclusively
  for agricultural use.
• The machine is not designed for light/heavy
  forestry ap- plications usage is prohibited for
  forestry applications.
• All other use will be considered to be contrary
  to the use specified by CNH INDUSTRIAL AMERICA
  LLC, who cannot be held liable for damage to
  property or the machine, or for personal
  injuries which may result.
• Persons who risk improper use will therefore
  assume the responsibility for any consequences
  arising from such use.
• Compliance with the instructions for use,
  maintenance and repairs described in this
  manual, are the essen-

• tial preconditions for the use specified by CNH
  INDUS- TRIAL AMERICA LLC.
• The machine must only be used, serviced, or
  repaired by personnel trained in the relevant
  working methods and safety regulations and who
  have been authorized to work on the machine.
• The user must also observe the rules concerning
  gen- eral safety and accident prevention,
  including the High- way Code when driving on
  public highways.
• Any arbitrary modifications made to this machine
  will release CNH INDUSTRIAL AMERICA LLC from any
  liability resulting from damage or injury.
• CNH AMERICA LLC and all its distribution organi-
  zations, inclusive of, but not restricted to,
  national, regional, or local distributors,
  cannot be held liable for damage resulting from
  the malfunction of parts and/or components not
  approved by CNH INDUSTRIAL AMERICA LLC.
• Under no circumstances will a guarantee be issued
  for products made or sold by CNH INDUSTRIAL
  AMER- ICA LLC that are damaged as a result of
  the malfunc- tion of parts and/or components not
  approved by CNH INDUSTRIAL AMERICA LLC.
• The use of biodiesel blends meeting Specification
  Stan- dards ASTM 6751 or EN14214 are approved
  for your engine up to B5 (5 blend ratio). It is
  highly recom- mended to use biodiesel fuel from
  accredited suppliers to maintain quality and
  consistency of the fuel.

1-3
11

• 1 - GENERAL INFORMATION
• Electro-magnetic compatibility (EMC)
• Interference may arise as a result of add-on
  equipment that may not necessarily meet the
  required standards. As such interference can
  result in serious malfunction of the unit and/or
  create unsafe situations, you must observe the
  following
• The maximum power of emission equipment (radio,
  telephones, etc.) must not exceed the limits
  imposed by the national authorities of the
  country where you use the machine
• The electro-magnetic field generated by the
  add-on system should not exceed 24 V/m at any
  time and at any lo- cation in the proximity of
  electronic components
• The add-on equipment must not interfere with the
  functioning of the on board electronics
• Failure to comply with these rules will render
  the NEW HOLLAND warranty null and void.

1-4
12
1 - GENERAL INFORMATION
Manual scope and required training level
Introduction to this Manual This manual gives
information for use of your NEW HOL- LAND
machine, as intended and under the conditions
foreseen by the manufacturer during normal
operation and routine service and maintenance.
This manual does not contain all the information
related to periodical ser- vice, converting and
repairs to be carried out by profes- sional
service personnel. For some of the latter
activities, there may be a need for appropriate
facilities, technical skills, and/or tools which
are not supplied with the ma- chine.
This manual does not contain all the information
related to periodical service, converting and
repairs to be carried out by NEW HOLLAND
professional service personnel. For some of the
latter activities, there may be a need for
appropriate facilities, technical skills, and/or
tools which are not supplied with the NEW HOLLAND
machine.

• Periodical service consists of activities that
  must be done at defined intervals
• By trained personnel familiar with the NEW
  HOLLAND machine characteristics.
• By trained personnel complying with the
  information for periodical service and safe
  practices, as partly spec- ified by the
  manufacturer in this manual and in other company
  literature.
• In order to maintain the expected life time of
  the NEW HOLLAND machine. Periodical service
  includes activ- ities such as changing oil from
  the engine, hydraulic circuits or transmission,
  or other substances or compo- nents that need
  periodical exchange.

The manual is divided into sections as outlined
in the Gen- eral Table of Contents Page(s). Refer
to the Detail Index at the end of this manual for
locating specific items about your NEW HOLLAND
machine.
Scope and Required Training Level This manual
gives information for use of your NEW HOL- LAND
machine, as intended and under the conditions
foreseen by the manufacturer during normal
operation and routine service and maintenance.

• Converting consists of activities that must be
  done
• By professional service personnel familiar with
  the NEW HOLLAND machine characteristics
• Complying with the information for converting, as
  partly specified by the manufacturer in this
  manual, in assem- bly instructions, or in other
  company literature
• In order to rebuild the NEW HOLLAND machine in a
  configuration which is appropriate for a
  specific crop or soil condition (e.g.,
  installation of dual wheels etc.)

• Normal operation consists of use of the NEW
  HOLLAND machine for the purpose intended by the
  manufacturer by an operator that is
• Familiar with the NEW HOLLAND machine and the
  mounted or towed equipment.
• Complying with the information for operation and
  safe practices, as specified by the manufacturer
  in this man- ual and by the signs on the machine.

• Repair (and dismantling) consists of activities
  that must be done
• By professional service personnel familiar with
  the NEW HOLLAND machine characteristics
• Complying with the information for repair, as
  specified by the manufacturer in the NEW HOLLAND
  dealers service manual.
• In order to restore the proper function of the
  NEW HOL- LAND machine after a failure or
  degradation of perfor- mance when scrapping or
  dismantling the NEW HOL- LAND machine.

• Normal operation includes
• The preparation and storage of the NEW HOLLAND
  machine
• Swinging components into work position and vice
  versa
• Adding or removing ballast
• Picking up and setting off mounted or towed
  equipment
• The adjustment and setting of the NEW HOLLAND ma-
  chine and equipment for the specific condition
  of the field and/or the crop.

Read this manual before you start the engine or
operate this NEW HOLLAND machine. If any
information in this manual is not understood, or
if you need more information or assistance,
contact your NEW HOLLAND dealer.

• Routine service and maintenance consists of
  activities that must be done daily in order to
  maintain its proper function by an operator that
  is
• Familiar with NEW HOLLAND machine characteristics
• Complying with the information for routine
  service and safe practices, as specified by the
  manufacturer in this manual and by the signs on
  the NEW HOLLAND ma- chine. Routine service
  includes activities such as fuel- ing, cleaning,
  washing, topping up fluid levels, greas- ing,
  and replacing consumable articles such as lamp
  bulbs.

All persons training to operate, or who will be
operating this NEW HOLLAND machine, should be old
enough to possess a valid local vehicle operating
permit (or other applicable local age
requirement) and must have demon- strated the
ability to operate and service the NEW HOL- LAND
machine correctly and safely.
1-5
13
1 - GENERAL INFORMATION
Metric and imperial units abbreviations
Typical applications Metric unit Metric unit Imperial unit Imperial unit
Typical applications Name Symbol Name Symbol

Area (Land area) Area (Land area) Area (Land area) Area (Land area) Area (Land area)
hectare ha acre ac
square meter m² square foot ft²
square meter m² square inch in²
square millimeter mm² square inch in²
Electricity Electricity Electricity Electricity Electricity
ampere A ampere A
volt V volt V
microfarad µF microfarad µF
ohm O ohm O
Force Force Force Force Force
kilonewton kN pound lb
newton N pound lb
Force per length Force per length Force per length Force per length Force per length
newton per meter N/m pound per foot lb/ft
newton per meter N/m pound per inch lb/in
Frequency Frequency Frequency Frequency Frequency
megahertz MHz megahertz MHz
kilohertz kHz kilohertz kHz
hertz Hz hertz Hz
Frequency - Rotational Frequency - Rotational Frequency - Rotational Frequency - Rotational Frequency - Rotational
revolution per minute r/min revolution per minute r/min ª
revolution per minute rpm revolution per minute rpm
Length Length Length Length Length
kilometer km mile mi
meter m foot ft
centimeter cm inch in
millimeter mm inch in
micrometer µm
Mass Mass Mass Mass Mass
kilogram kg pound lb
gram g ounce oz
milligram mg
Mass per mass Mass per mass Mass per mass Mass per mass Mass per mass
milligram per kilogram mg/ kg parts per million ppm
Power Power Power Power Power
kilowatt kW horsepower Hp
watt W Btu per hour Btu/hr
Btu per minute Btu/min
Pressure or stress (Force per area) Pressure or stress (Force per area) Pressure or stress (Force per area) Pressure or stress (Force per area) Pressure or stress (Force per area)
kilopascal kPa pound per square inch psi
inch of mercury inHg
pascal Pa inch of water inH2O
megapascal MPa pound per square inch psi
millibar mbar
bar bar
1-6
14
1 - GENERAL INFORMATION
Typical applications Metric unit Metric unit Imperial unit Imperial unit
Typical applications Name Symbol Name Symbol

Temperature (other than thermodynamic) Temperature (other than thermodynamic) Temperature (other than thermodynamic) Temperature (other than thermodynamic) Temperature (other than thermodynamic)
degrees Celsius C degrees Fahrenheit F
Time Time Time Time Time
hour h hour h
minute min minute min
second s second s
Torque (includes bending moment, moment of force, and moment of a couple) Torque (includes bending moment, moment of force, and moment of a couple) Torque (includes bending moment, moment of force, and moment of a couple) Torque (includes bending moment, moment of force, and moment of a couple) Torque (includes bending moment, moment of force, and moment of a couple)
newton meter N m pound foot lb ft
pound foot lb in
Velocity Velocity Velocity Velocity Velocity
kilometer per hour km/h mile per hour mph
meter per second m/s foot per second ft/s
millimeter per second mm/s inch per second in/s
meter per minute m/min foot per minute ft/min
Volume (includes capacity) Volume (includes capacity) Volume (includes capacity) Volume (includes capacity) Volume (includes capacity)
cubic meter m³ cubic yard yd³
cu yd
liter l cubic inch in³
liter l US gallon US gal
UK gallon UK gal
US quart US qt
UK quart UK qt
milliliter ml fluid ounce fl oz
Volume per time (includes discharge and flow rate) Volume per time (includes discharge and flow rate) Volume per time (includes discharge and flow rate) Volume per time (includes discharge and flow rate) Volume per time (includes discharge and flow rate)
cubic meter per minute m³/min cubic foot per minute ft³/min
liter per minute l/min US gallon per minute US gal/min
milliliter per minute ml/min UK gallon per minute UK gal/min
Sound power level and sound pressure level Sound power level and sound pressure level Sound power level and sound pressure level Sound power level and sound pressure level Sound power level and sound pressure level
decibel dB decibel dB
Water hardness Water hardness Water hardness Water hardness Water hardness
German hardness dH English hardness e
French hardness fH parts per million ppm
Glossary
Acronym Definition
DEF Diesel Exhaust Fluid
ISO International Organization for Standardization
MSDS Material Safety Data Sheet
NOx Nitrogen Oxide
PPE Personal Protective Equipment
SCR Selective Catalytic Reduction
ULSD Ultra Low Sulfur Diesel
Percent
lt Less than
gt Greater than
1-7
15
1 - GENERAL INFORMATION Product
identification The Product Identification Plate
(1) is located on the left- hand side of the
front frame.. The numbers on the plate are
important in the event your tractor should
require future service.
NHIL15CT00338AA 1
The engine identification information plate (2)
is located on the right-hand side of the engine
block, behind the fuel injection pump.
NHIL13CT01158AA 2
Operator's manual storage The operators manual
must be stored in a secure place prior to
operation and it must be kept available for use
by all operators. NOTE There is not a designated
manual storage area on the tractor.
1-8
16
1 - GENERAL INFORMATION Machine
orientation NOTE On this equipment, lefthand
and right-hand are determined by standing behind
the unit, looking in the di- rection of travel.
NHIL15CT00344AA 1
NHIL15CT00346AA 2
Left-hand view
Right-hand view
NHIL12CT00671AA 3
NHIL15CT00345AA 4
Rear view
Front view
1-9
17

• 1 - GENERAL INFORMATION
• Exhaust Gas Recirculation (EGR) - Diesel
  Particulate Filter (DPF) exhaust treatment -
  Product overview
• What is Exhaust Gas Recirculation (EGR)?
• Your NEW HOLLAND machine is equipped with
  additional components to comply with national and
  local exhaust emissions requirements. EGR works
  by recirculating a portion of the engine exhaust
  gasses back into the engine combustion chamber to
  lower combustion temperatures.
• The main components of the EGR system include
• EGR valve
• Diesel Particulate Filter (DPF)
• Diesel Oxidation Catalyst (DOC)
• Exhaust gas temperature sensors
• Differential pressure sensor
• Throttle valve actuator
• What is a Diesel Particulate Filter (DPF)?
• A Diesel Particulate Filter (DPF) is a filter
  mounted in the exhaust stream. During normal
  operating conditions, the exhaust gasses pass
  through the porous walls of the DPF and trap
  Particulate Matter (PM) generated by the combus-
  tion process of the engine. When channels inside
  the DPF fill up with PM, the system must be
  cleaned. The cleaning process is called
  regeneration.
• How does the regeneration process work?
• When the DPF becomes restricted, the system will
  need to be cleaned or regenerated by raising
  exhaust temperatures to burn off the trapped
  Particulate Matter (PM). This process is usually
  done automatically, but may require a manual
  regeneration sequence to be activated depending
  on operating conditions. Burned PM will leave
  behind traces of ash within the DPF. The ash must
  be cleaned out by a NEW HOLLAND dealer outfitted
  with machines specifically designed to clean DPF
  systems. See the Link to maintenance chart
  for service intervals.
• Automatic regeneration

18

• 1 - GENERAL INFORMATION
• New Holland Top Service 1-866-639-4563
  na.topservice_at_newholland.com
• FEDERAL EMISSIONS WARRANTY WARRANTY STATEMENT
• ISM warrants that your 2013 and later off-road
  diesel engine was designed, built and equipped to
  conform to applicable U.S. Environmental
  Protection Agency (EPA) regulations and is free
  from defects in materials and workmanship which
  cause it to fail to conform with such
  regulations, for the following period of
  operation
• For a period of two (2) years or 1,500 hours of
  operation, whichever occurs first, after the date
  of delivery to the initial retail owner of any
  variable speed off-road diesel engine rated at
  less than 19 kW (25 Hp) and any constant-speed
  off-road diesel engine rated at less than 37 kW
  (50 Hp) with rated speed greater than or equal to
  3,000 RPM.
• For a period of five (5) years or 3,000 hours of
  operation, whichever occurs first, after the date
  of delivery to the initial retail owner for all
  other off-road diesel engines.
• WARRANTY INFORMATION
• The model year, class of diesel engine, and
  emission application for your engine are
  identified on the emission control information
  label affixed to the right hand side of your
  engines front side of timing gear case or head
  cover.
• Any emission control system parts that are proven
  defective during normal use will be repaired or
  replaced during the warranty period. The warranty
  repairs and service will be performed by any
  authorized ISM dealer at the dealers place of
  business, with no charge for parts or labor
  (including diagnosis).
• As the engine owner, you are responsible to
  perform all the required maintenance listed in
  your owners manual. ISM will not deny an
  emission warranty claim solely because you have
  no record of maintenance however, a claim may be
  denied if your failure to perform maintenance
  resulted in the failure of a warranted part.
  Receipts covering regular maintenance should be
  retained in the event of questions and these
  receipts should be passed on to each subsequent
  owner of the engine.
• It is recommended that replacement parts used for
  maintenance or repairs be ISM Service Parts to
  maintain the quality originally designed into
  your emission certified engine. The use of
  non-ISM parts does not invalidate the warranty on
  other components unless the use of such parts
  causes damage to warranted parts.
• ISM wishes to assure that the emission control
  systems warranty is being properly administered.
  If you believe you have not received the service
  to which you are entitled to under this warranty,
  you should contact the nearest ISM Branch Office
  for assistance. The address and phone number of
  each Branch Office is in your owners manual.

EXCEPTIONS Please note that Emission Warranty
does not cover

1. Parts requiring replacement or inspection or
   adjust- ment during scheduled maintenance
   intervals where the part is not defective.
2. Parts which are not ISM Service Parts.
3. Loss of time, inconvenience, loss of use of
   equip- ment/engine or commercial loss.
4. Equipment with an altered or disconnected hourme-
   ter where the hours cannot be determined.
5. Equipment normally operated outside the United
   States

1. Systems and parts that were not first installed
   on the new equipment or engine as original
   equipment by ISM
2. Part malfunctions caused by abuse, misuse, im-
   proper adjustment, modification, alteration,
   tam- pering, disconnection, improper or
   inadequate maintenance, or use of nonrecommended
   fuels and lubricating oils.
3. Damage caused by accident, acts of nature, or
   other events beyond ISMs control.
4. Replacement of expendable items made in connec-
   tion with scheduled maintenance.

10. Non-defective parts replaced by other than
ISM deal- ers.
PARTS COVERED This emission control system
warranty applies to the following emission
control parts

• Fuel Injection Pump
• Fuel Injectors

1-11
19
1 - GENERAL INFORMATION

• Intake Manifold
• Exhaust Manifold
• Positive Crankcase Ventilation system parts
  (including PCV Valve and Oil Filler Cap)
• Turbocharger (if equipped)
• Charge air cooling system (if equipped)
• Smoke puff limiter (if equipped)

• EGR system (including EGR Valve, EGR Pipe and EGR
  cooler) (if equipped)
• Intake throttle valve (if equipped)
• Exhaust Aftertreatment system (if equipped)
• Aftertreatment Regeneration device (if equipped)
• Miscellaneous hoses, clamps, connectors and
  sealing gaskets or devices used in the above
  systems.

• CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
• California Air Resources Board (CARB)
• YOUR WARRANTY RIGHTS AND OBLIGATIONS
• The California Air Resources Board and ISM (ISM)
  are pleased to explain the emission control
  system warranty on your 2013 and later engine. In
  California, new engines must be designed, built
  and equipped to meet the States stringent
  anti-smog standards. ISM must warrant the
  emission control system on your engine for the
  periods of time listed below provided there has
  been no abuse, neglect or improper maintenance of
  your engine. Additional conditions and
  responsibilities are further outlined below.
  Where a warrantable condition exists, ISM will
  repair your engine at no cost to you including
  diagnosis, parts and labor.
• MANUFACTURERS WARRANTY COVERAGE
• ISM warrants to the original owner, and to each
  subsequent owner, of a new, diesel engine that
  the emission control system of your engine
• Was designed, built and equipped so as to conform
  at the time of sale with all applicable
  regulations of the Cali- fornia Air Resources
  Board (CARB).
• Is free from defects in material and workmanship
  that will cause such engine to fail to conform
  with applicable regulations for the following
  warranty period
• for variable speed engines rated under 19 kW (25
  Hp) two (2) years or 1,500 hours of operation,
  whichever occurs first. In the absence of a
  device to measure hours of use, the engine shall
  be warranted for a period of two years.
• for constant speed engines rated under 37 kW (50
  Hp) with peak power rated at 3,000 RPM or
  greater two (2) years or 1,500 hours of
  operation, whichever occurs first. In the absence
  of a device to measure hours of use, the engine
  shall be warranted for a period of two years.
• for engines rated at or above 19 kW (25 Hp) five
  (5) years or 3,000 hours of operation, whichever
  occurs first. In the absence of a device to
  measure hours of use, the engine shall be
  warranted for a period of five years.
• for engines rated at or above 37 kW (50 Hp) five
  (5) years or 3,000 hours of operation, whichever
  occurs first. In the absence of a device to
  measure hours of use, the engine shall be
  warranted for a period of five years.
• The warranty period shall begin
• on the date the equipment is first delivered to
  the first retail purchaser, or
• if the equipment is placed in service for
  demonstration purposes prior to sale at retail,
  on the date the engine is first placed in
  service.
• The emission control systems of your new ISM
  engine were designed, built and tested using
  genuine ISM parts, and the engine is certified as
  being in conformity with CARB emission control
  regulations.
• Accordingly, it is recommended that any
  replacement parts used for maintenance, repair or
  replacement of emission control systems be ISM
  parts. Any replacement part may be used in the
  performance of any maintenance or repairs,
  although ISM recommends that the owner obtain
  assurance that such parts are warranted by their
  manufacturer to be equivalent to genuine ISM
  parts. Such use shall not reduce the warranty
  obligations of the engine manufacturer, provided
  they are warranted to be equivalent to genuine
  ISM parts.

1-12
20
Suggest If the above button click is invalid.
Please download this document first, and then
click the above link to download the complete
manual. Thank you so much for reading
21
1 - GENERAL INFORMATION Any warranted part that
is not scheduled for replacement, as required
maintenance shall be warranted for the warranty
period defined above. If any such part fails
during the period of warranty coverage, it will
be repaired or replaced under warranty. Any such
part repaired or replaced under the warranty
shall be warranted for the remaining warranty
period. Any warranted part that is scheduled only
for regular inspection in the written
instructions shall be warranted for the warranty
period defined above. A statement in the written
instructions to the effect of "repair or replace
as neces- sary" shall not reduce the period of
warranty coverage. Any such part repaired or
replaced under warranty shall be warranted for
the remaining warranty period. Any warranted part
that is scheduled for replacement, as required
maintenance shall be warranted for the period of
time prior to the first scheduled replacement
point for that part. If the part fails prior to
the first scheduled replacement, the part shall
be repaired or replaced by the engine
manufacturer under warranty. Any such part
repaired or replaced under warranty shall be
warranted for the remainder of the period prior
to the first scheduled replacement point for the
part. Repair or replacement of any warranted part
under warranty shall be performed at no charge to
the owner at a war- ranty station. ISM provides
warranty services or repairs at all manufacturer
distribution centers (warranty stations) that are
fran- chised to service the subject engines.
Please see the Customer Assistance section of
this statement for help in locating such service
centers. The owner will not be charged for
diagnostic labor that leads to the determination
that a warranted part is in fact defective,
provided that such diagnostic work is performed
at a warranty station. ISM is liable for damages
to other engine components proximately caused by
a failure under warranty of any war- ranted
part. ISM is required by California regulations
to maintain a supply of warranted parts
sufficient to meet the expected de- mand for such
parts during the warranty period for the engines
covered by this warranty. OWNERS WARRANTY
RESPONSIBILITIES This engine is designed to
operate on ultra-low sulfur diesel fuel only if
rated gt19kW, and on low sulfur or ultra-low
sulfur diesel fuel only if rated lt19kW. Use of
any other fuel may result in this engine no
longer operating in compliance with Californias
emissions requirements. The purchaser is
responsible for initiating the warranty process.
The California Air Resources Board suggests that
the engine be presented to an ISM dealer as soon
as a problem exists. The warranty repairs should
be completed by the dealer as expeditiously as
possible. Add-on or modified parts, as defined in
Section 1900(b)(1) and (b)(10), Title 13, that
are not exempted by the Air Resources Board may
not be used. The use of any non-exempted add-on
or modified parts shall be grounds for
disallowing a warranty claim made in accordance
with this article. The engine manufacturer shall
not be liable under this article to warrant
failures of warranted parts caused by the use of
a non-exempted add-on or modified part. The
emissions control parts covered by this Emission
Control System Warranty are listed under What is
Covered By the Emission Warranty. As the
off-road engine owner, you are responsible for
the performance of the required maintenance
listed in your owner's manual. ISM recommends
that you retain all receipts covering maintenance
on your off-road engine, but ISM cannot deny
warranty solely for the lack of receipts or for
your failure to ensure the performance of all
scheduled maintenance. As the off-road engine
owner, you should however be aware that ISM may
deny you warranty coverage if your off-road
engine or a part has failed due to abuse,
neglect, improper maintenance or unapproved
modifications. Customer Assistance In the event
that you do not receive the warranty service to
which you believe you are entitled under the
Emission Control Systems Warranty, you should
contact ISM at the address below for assistance.
If you need additional assistance or information
concerning the Emission Control System Warranty,
contact IHI Shibaura Machinery Corporation
Quality department 1-13
22
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com