Case IH Farmall 65C Farmall 75C Farmall 85C Farmall 95C Tractors Operator’s Manual Instant Download (Publication No.84131301) - PowerPoint PPT Presentation

About This Presentation
Title:

Case IH Farmall 65C Farmall 75C Farmall 85C Farmall 95C Tractors Operator’s Manual Instant Download (Publication No.84131301)

Description:

Case IH Farmall 65C Farmall 75C Farmall 85C Farmall 95C Tractors Operator’s Manual Instant Download (Publication No.84131301) – PowerPoint PPT presentation

Number of Views:0
Date added: 24 August 2024
Slides: 23
Provided by: kkrdmisokdkm
Category:
Tags:

less

Transcript and Presenter's Notes

Title: Case IH Farmall 65C Farmall 75C Farmall 85C Farmall 95C Tractors Operator’s Manual Instant Download (Publication No.84131301)


1
Farmall 65C, Farmall 75C, Farmall 85C, Farmall
95C Tractors Operators Manual
84131301 9/08 Replaces 87747078
2
TO THE OWNER
This manual contains information concerning the
adjustment and maintenance of your Case IH
Farmall Model 65C, 75C, 85C and 95C Tractors. You
have purchased a dependable machine, but only by
proper care and operation can you expect to
receive the performance and long service built
into this tractor. Please have all operators read
this manual carefully and keep it available for
ready reference. Your Case IH dealer will
instruct you in the general operation of your
tractor. (Refer to the Delivery Report at the
back of this manual.) Your dealers staff of
factory-trained service technicians will be glad
to answer any questions that may arise regarding
the operation of your tractor. Your Case IH
dealer carries a complete line of genuine Case IH
service parts. These parts are manufactured and
carefully inspected to insure high quality and
accurate fitting of any necessary replacement
parts. Be prepared to give your dealer the model
and product identification number of the tractor,
when ordering parts. Locate these numbers now and
record them below. Refer to the General
Information section of this manual for the
location of the model and product identification
numbers of your tractor. Model Product
Identification Number
WARNING This safety alert symbol indicates
important safety messages in this manual. When
you see this symbol, carefully read the message
that follows and be alert to the possibility of
personal injury or death. WARNING Pictures in
this manual may show protective shielding open or
removed to better illustrate a particular feature
or adjustment. Be certain, however, to close or
replace all shielding before operating the
machine.
IMPROVEMENTS CNH America LLC is continually
striving to improve its products. We reserve the
right to make improvements or changes when it
becomes practical and possible to do so, without
incurring any obligation to make changes or
additions to the equipment sold previously.
3
CONTENTS
Section 0 To the Owner ...........................
..................................................
.. 0-1 Improvements .............................
.................................................
0-1 Federal Emissions Warranty ...................
...............................................
0-5 California Emission Control Warranty
Statement ........................................
......... 0-6 Section 1 General Information and
Safety ...........................................
..................... 1-1 Tractor Identification
Plates ...........................................
........................ 1-2 Important Ecological
Considerations ...................................
........................ 1-5 Precautionary
Statements .......................................
............................. 1-6 Working Safely
..................................................
............................ 1-8 Safety Covers
and Guards .......................................
............................ 1-14 Fold-down Roll
Bar (ROPS) .......................................
........................... 1-16 Safety Decals
..................................................
............................ 1-17 Standardized
Symbols ..........................................
............................ 1-24 Tractor Noise
Level Information Sheet ..........................
............................... 1-25 Section
2 General Information, Controls and Instruments
..................................................
2-1 Introduction ................................
.................................................
2-1 Analog Control Panel .........................
...............................................
2-2 Analog Panel Indicators ......................
................................................
2-3 Operation Indicator Light Panel
..................................................
.............. 2-9 Operating Controls
..................................................
....................... 2-31 Seat Adjustment
..................................................
.......................... 2-36 Steering Wheel
Adjustment .......................................
........................... 2-38 Cab
..................................................
.................................... 2-39 Air
Conditioning/Ventilation .........................
..........................................
2-44 Cab Air-conditioning/Heating Controls
..................................................
....... 2-45 Transmission with Range Gear and
Mechanical Shuttle 30/40 km/h (18.64/24.35 mph)
(16F16R) ........................................
....... 2-52 Transmission with Range Gear and
Electro-hydraulic Shuttle 30/40 km/h (18.64/24.85
mph) (16F16R) ...................................
............ 2-53 Fast Transmissions 40 km/h
(24.85 mph) ......................................
................ 2-58
4
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com
5
Section 3 Field Operation ........................
..................................................
.... 3-1 Starting and Stopping ...................
..................................................
... 3-2 Brakes ...................................
..................................................
3-5 Mechanical MFD (Farmall 65C, 75C and 85C
Models only) .....................................
... 3-7 Electronically Controlled MFD
..................................................
............... 3-8 Differential Lock
..................................................
........................... 3-9 Lim-slip Front
Differential Lock ................................
...............................
3-10 Electrohydraulically Controlled Differential
Lock .............................................
.... 3-11 Power Take-off .........................
..................................................
.. 3-13 Mechanically Controlled Hydraulic Lift
..................................................
....... 3-16 Three-point Linkage
..................................................
...................... 3-20 Three-point Linkage
Points ..........................................
........................ 3-24 Auxiliary Control
Valves (Use and Maintenance) .....................
........................... 3-25 Rear Remote
Control Valves ...................................
.............................. 3-28 Wheel Track
Adjustment .......................................
.............................. 3-31 MFD Front and
Rear Wheel Track Adjustment ......................
............................ 3-33 Steering Angle
Adjustment (MFD) .................................
............................ 3-34 Tires
..................................................
.................................... 3-39 Loading
Information ......................................
................................... 3-41 Speed
Code .............................................
.................................. 3-41 Inflation
Pressures ........................................
.................................. 3-42 Tire
Sizes. ...........................................
...................................... 3-43 R1
Radial Tires ....................................
........................................
3-43 Bias R1 Tires ...............................
...............................................
3-45 Turf Bias R3 Tires ..........................
................................................
3-46 Industrial R4 Tires .........................
.................................................
3-47 Tire Selection (MFD) ........................
................................................
3-48 Metal Ballasting ............................
................................................
3-50 Liquid Ballasting ...........................
.................................................
3-51 Maximum Permitted Weights ...................
..............................................
3-53 Section 4 Lubrication and Maintenance
..................................................
................ 4-1 Tractor Refuelling
..................................................
.......................... 4-3 Access for
Inspection and Maintenance .......................
..................................
4-6 Lubrication and Maintenance Table
..................................................
.......... 4-7 Flexible Maintenance (Operations
to Perform Only If Necessary) ....................
.............. 4-10
6
When the Indicator Light Illuminates on the
Dashboard .......................................
... 4-15 Every 10 Hours of Work
..................................................
................... 4-19 Every 50 Hours of Work
..................................................
................... 4-20 Every 100 Hours of Work
..................................................
.................. 4-22 Every 300 Hours of Work
..................................................
.................. 4-25 Every 500/600 Hours of
Work .............................................
................... 4-30 Every 1200 Hours or
Every Year .......................................
....................... 4-34 Every 1200 Hours of
Work or Every 2 Years ............................
........................ 4-36 Every 1800 Hours of
Work .............................................
...................... 4-41 General Maintenance
..................................................
..................... 4-42 Electrical System
..................................................
......................... 4-42 Starting the
Engine with a Flat Battery or No Battery
.............................................
4-43 Fuses and Relays (Version With Cab)
..................................................
....... 4-45 Fuses and Relays (With ROPS)
..................................................
............ 4-56 Replacing Multiple Instrument
Panel Indicators .................................
................ 4-66 Recommendations for
Bodywork Maintenance .............................
..................... 4-71 Lubricants and Fluids
..................................................
..................... 4-72 Section
5 Troubleshooting ................................
.............................................
5-1 Section 6 Prolonged Tractor Inactivity
..................................................
................. 6-1 Section 7 Accessories
..................................................
.............................. 7-1 Towing
Equipment ........................................
................................... 7-2 Joystick
Control (On Request) .............................
.................................... 7-3 Section
8 Specifications and Data ........................
..............................................
8-1 Engine Data ..................................
..............................................
8-4 Section 9 Inspections and/or Operations to
be Carried Out ...................................
.............. 9-1 Index .........................
..................................................
........... 9-5
7
  • FEDERAL EMISSIONS WARRANTY
  • (North America Only)
  • (California owners emissions warranty is covered
    elsewhere)
  • CNH UK Ltd warrants that your new 1996 and later
    heavy-duty off-road diesel engine was designed,
    built, and equipped to conform to applicable U.S.
    Environmental Protection Agency regulations for a
    period of use of five years or 3,000 hours of
    operation, whichever occurs first.
  • The new model year, class of diesel engine, and
    emission application determination for your
    engine are identified on the emission control
    information label affixed to the engine. The
    warranty period begins on the date the new
    equipment is sold to the first retail purchaser.
  • Any emission control system parts which are
    proven defective during normal use will be
    repaired or replaced during the warranty period.
    The warranty repairs and service will be
    performed by any authorized CNH dealer at the
    dealers place of business, with no charge for
    parts or labor (including diagnosis).
  • As the engine owner, you are responsible to
    perform all the required maintenance listed in
    your owners manual. CNH UK Ltd will not deny an
    emission warranty claim solely because you have
    no record of maintenance however, a claim may be
    denied if your failure to perform maintenance
    resulted in the failure of a warranted part.
    Receipts covering regular maintenance should be
    retained in the event of questions and these
    receipts should be passed on to each subsequent
    owner of the engine.
  • It is recommended replacement parts used for
    maintenance or repairs be CNH Service Parts to
    maintain the quality originally designed into
    your emission certified engine. The use of
    non-CNH parts does not invalidate the warranty on
    other components unless the use of such parts
    causes damage to warranted parts.
  • CNH UK Ltd wishes to assure the emission control
    systems warranty is being properly administered.
    If you believe you have not received the service
    entitled to under this warranty, you should
    contact the nearest CNH Office for assistance.
    The address and phone number of each Office is in
    your equipment owners manual. If additional
    assistance or information is needed, contact
  • Service Department CNH America, LLC 500 Diller
    Avenue
  • New Holland, PA 17557 (717) 355-1121
  • Please note that the Emission Warranty does not
    cover
  • Systems and parts that were not first installed
    on the new equipment or engine as original
    equipment by CNH UK Ltd.
  • Part malfunctions caused by abuse, misuse,
    improper adjustment, modification, alteration,
    tampering, disconnection, improper or inadequate
    maintenance, or use of non-recommended fuels and
    lubricating oils.
  • Accident caused damage, acts of nature, or other
    events beyond CNH UK Ltds control.
  • Replacement of expendable items made in
    connection with scheduled maintenance.
  • Parts requiring replacement, inspection or
    adjustment maintenance intervals for reasons
    other than being defective.
  • Parts which are not CNH Service Parts.
  • Loss of time, inconvenience, loss of use of
    equipment/engine or commercial loss.

8
  • CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
  • (North America Only) (California Only)
  • Your Warranty Rights and Obligations
  • The California Air Resources Board and CNH UK LTD
    are pleased to explain the emission control
    system warranty on your engine. In California,
    new 2004 and later heavy-duty off-road engines
    from 50 to 750 hp must be designed, built and
    equipped to meet the States stringent anti-smog
    standards. CNH UK LTD must warrant the emission
    control system on your engine for the periods of
    time listed below, provided there has been no
    abuse, neglect or improper maintenance of your
    engine.
  • Your emission control system includes parts such
    as the fuel injection system and the air
    induction system.
  • Where a warrantable condition exists, CNH UK LTD
    will repair your heavy-duty off-road engine at no
    cost to you including diagnosis, parts and labor.
  • Manufacturers Warranty Coverage
  • The 2004 and later heavy-duty off-road engines
    are warranted from the original date of delivery
    for five years or 3000 hours of operation,
    whichever occurs first. If any emission-related
    part on your engine is defective, the part will
    be repaired or replaced by CNH UK LTD.
  • Owners Warranty Responsibilities
  • As the heavy-duty off-road engine owner, you are
    responsible for the performance of the required
    maintenance listed in your owners manual. CNH
    UK LTD recommends that you retain all receipts
    covering maintenance on your heavy-duty off-road
    engine, but CNH UK LTD cannot deny warranty
    solely for the lack of receipts or for your
    failure to ensure the performance of all
    scheduled maintenance.
  • As the heavy-duty off-road engine owner, you
    should, however, be aware that CNH UK LTD may
    deny you warranty coverage if your heavy-duty
    off-road engine or a part has failed due to
    abuse, neglect, improper maintenance or
    unapproved modifications.
  • Your engine is designed to operate on
    commercially available diesel fuel only. Use of
    any other fuel may result in your engine no
    longer operating in compliance with Californias
    emissions requirements.
  • You are responsible for initiating the warranty
    process. The ARB suggests that you present your
    heavy-duty off-road engine to a CNH dealer as
    soon as a problem exists. The warranty repairs
    should be completed by the dealer as
    expeditiously as possible.
  • If you have any questions regarding your warranty
    rights and responsibilities, you should contact
    your nearest CNH Office at the address and
    telephone number listed on the Owner Assistance
    page of your equipments operator manual.
  • Prior to the expiration of the warranty, you must
    give notice of any failure of an emission control
    warranted part. Such notice must be given to CNH
    UK LTD or an authorized CNH dealer, and you must
    deliver the engine to the repair location.
  • You, the owner, are responsible for incidental
    costs incurred by yourself or your employees as a
    result of an unwarrantable failure. Examples of
    such costs are communication expenses, meals and
    lodging.
  • The owner is responsible for any business costs
    or losses, any downtime expenses and any
    cargo damage which result from the failure of
    a warranted part. CNH UK LTD is not responsible
    for other incidental or consequential damages,
    including, but not limited to fines, theft,
    vandalism or collisions.
  • Parts covered
  • This emission control system warranty applies to
    the following emission control parts

Electronic Control Unit Fuel Injection Pump Fuel
Injectors Turbocharger
Intake Manifold Charge Air Cooler Exhaust
Manifold Boost Pressure Tubing (connection to
Aneroid Device on F.I.P.)
Any replacement part, equivalent in performance
and durability, may be used in the performance of
any maintenance or repairs and must be provided
without charge to the owner. The use of these
parts does not reduce the warranty obligations of
CNH UK LTD. However, CNH UK LTD recommends the
use of new, genuine CNH service parts or CNH
approved rebuilt parts and assemblies. CNH UK LTD
also recommends that the engine be serviced by a
CNH authorized dealer. CNH UK LTD
Responsibilities Warranty work will be provided
at no charge to the owner at any authorized
dealer, using genuine CNH service parts or CNH
approved rebuilt parts or assemblies. The owner
will not be charged for diagnostic labor which
leads to the determination that a warranted part
is defective, if the diagnostic work was
performed at a warranty station. CNH UK LTD is
liable for damages to other engine components
caused by the failure under warranty of any
warranted part. Warranty Limitations CNH UK LTD
is not responsible for failures resulting from
abuse or neglect by owner or operator. CNH UK LTD
warrants to the ultimate purchaser and each
subsequent purchaser that the engine is designed,
built, and equipped so as to conform with all
applicable regulations adopted by the Air
Resources Board, and that it is free from defects
in materials and workmanship which cause the
failure of a warranted part. Any warranted part
which is not scheduled for replacement as
required maintenance, or which is scheduled only
for regular inspection to the effect of repair
or replace as necessary is warranted for the
warranty period. Any warranted part which is
scheduled for replacement as required maintenance
is warranted for the period of time prior to the
first scheduled replacement point of that
part. CNH UK LTD is not liable to warrant
failures caused by the use of add-on or modified
parts. CNH UK LTD is concerned to ensure proper
maintenance of the engine to maximise emissions
performance. Information on care and replacement
of engine air cleaner, and all other aspects of
engine maintenance is provided in a manual
supplied to the owner. A maintenance schedule
chart is provided in the manual.
9
(North America Only) (California Only)
CALIFORNIA Proposition 65 Warning Diesel engine
ezhaust and some of its constituents are known to
the State of California to cause cancer, birth
defects, and other reproductive harm. Battery
posts, terminals and related accessories contain
lead and lead compounds, chemicals known to the
State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
after handling.
10
(No Transcript)
11
SECTION 1 GENERAL INFORMATION AND SAFETY
GENERAL This Use and Maintenance Manual provides
a guide for the user with regard to running-in,
use and maintenance of the tractor. Read this
manual carefully and keep in a convenient place
for future reference. Do not hesitate to contact
your local dealer for any queries concerning your
tractor. The dealer can provide skilled
personnel, trained by the manufacturer, original
service parts and all tools and equipment
necessary for your service requirements. The
tractor is designed as a power generator and
drive-propulsion unit for use in normal and
traditional agricultural conditions. The tractor
is also designed to provide maximum performance,
economic running and easy use over a wide range
of operations. Prior to delivery, all machines
are carefully inspected (by both the Manufacturer
and your local authorized dealer), to make sure
that they reach the user in perfect condition. To
maintain the tractor in this condition and ensure
trouble-free operation, the routine mainte- nance
described in Section 3 of this manual must be
carried out at the specified intervals.
SAFETY PRECAUTIONS Safety precautions for the
operator and bystanders are shown on the
following pages. Read the safety instructions and
follow recommendations and hints before starting
to use the tractor.
SERVICE AFTER THE FIRST 50 HOURS OF WORK The
operations required for the first service are
shown at the end of the Manual, immediately prior
to the index. After the first 50 hours of use,
return to the dealer with your tractor and this
Manual in order to carry out the Manufacturers
checks and to fill in the certificates included
in Section 9. The first sheet must be compiled on
completion of the service and held by the dealer.
The second sheet must be kept in the Manual for
documentation and reference purposes. Check that
both copies are signed by both yourself and the
dealer.
SPARE PARTS Non-original spare parts have not
been tested or authorized by the Manufacturer.
Installment and/or use of such products may
adversely affect the tractors design
specifications, thereby compromis- ing
operational safety. The manufacturer cannot be
held responsible for any damage resulting from
the use of non-original spare parts. No
modifications may be made to the tractor without
written authorization from the Manufacturer.
  • CLEANING THE TRACTOR
  • Your tractor is an advanced machine, fitted with
    an electro-hydraulic control system. Care must be
    taken when cleaning the tractor, especially if a
    pressurized water cleaner is used.
  • When using a pressure washer, never stand too
    close to the tractor or direct the water jet on
    electrical components, seals or intake openings,
    etc.
  • Never direct jets of cold water at the hot engine
    or exhaust. See also Section 3 (Recommenda- tions
    for bodywork maintenance).

WARRANTY The tractor is guaranteed in accordance
with current legislation in your country and in
line with contractual agreements reached with the
dealer at the time of sale. However, the warranty
is no longer valid if the rules and instructions
for the use and maintenance of the tractor,
described in this Manual, are not observed.
12
SECTION 1 - GENERAL INFORMATION AND
SAFETY TRACTOR IDENTIFICATION PLATES Serial
numbers identify the tractor and its main
components. The identification data must be
supplied by the dealer for requests for spare
parts or service operations. Identification data
is of fundamental importance in the event of
theft of the tractor. The location of the various
identification data is shown below. TRACTOR
CHASSIS FRAME IDENTIFICATION DATA PLATE The
tractors frame number is stamped over the front
support, 1. It gives the safety frame
identification data. Indicate below the
corresponding serial number.
1
TRACTOR TYPE-APPROVAL SUMMARY DATA PLATE FOR
MODELS WITH ROLL BAR The plate, 1, is on the
right-hand side. Indicate below the corresponding
serial number.
2
TRACTOR TYPE-APPROVAL SUMMARY DATA PLATE FOR
MODELS WITH CAB The plate, 1, is inside the cab
on the right-hand side. Indicate below the
corresponding serial number.
3
13
SECTION 1 - GENERAL INFORMATION AND
SAFETY ENGINE IDENTIFICATION DATA PLATE (MODELS
85C AND 95C) 1 The serial number of the engine
fitted on the tractor is stamped on the right
-hand side of the engine body, 1. Indicate below
the corresponding serial number.
4
ENGINE IDENTIFICATION DATA PLATE (MODELS 65C AND
75C)
1
The serial number of the engine installed on the
tractor is stamped on the left side of the engine
block near the hydraulic pumps, 1.
Indicate below the corresponding serial number.
5
ROLL BAR IDENTIFICATION PLATE The plate, 1, is
inside the right-hand upright of the
frame. Indicate below the corresponding serial
number.
6
14
SECTION 1 - GENERAL INFORMATION AND SAFETY CAB
IDENTIFICATION PLATE The cab identification
plate, 1, is located at the rear on the
right-hand side as shown in the figure. Indicate
below the corresponding serial number.
7
FRONT AXLE IDENTIFICATION PLATE The plate, 1, is
located on the right -hand side and gives the
identification data for the axle fitted on the
machine. Indicate below the corresponding serial
number.
8
TRACTOR CHASSIS FRAME IDENTIFICATION DATA PLATE
FOR MODELS WITH FRONT LIFT The tractors frame
number is stamped over the front support, 1. It
gives the safety frame identification
data. Indicate below the corresponding serial
number.
9
15
SECTION 1 - GENERAL INFORMATION AND SAFETY
IMPORTANT ECOLOGICAL CONSIDERATIONS
  • Soil, air and water are essential elements for
    agriculture and for life on in general. If local
    legislation does not control the treatment of
    certain substances, the production of which is
    necessitated by advanced technologies, products
    derived from chemical and petrochemical products
    must be used and disposed of according to the
    rules of common sense.
  • The following recommendations may be of help
  • Find out what the relevant legislation in your
    country stipulates.
  • Ask your suppliers of lubricants, oils, fuels,
    anti-freeze, detergents, etc. for information on
    the effects of these products on humans and the
    environment and for instructions concerning their
    use, storage and disposal. In many cases, local
    agricultural consultants will be able to provide
    assistance.
  1. Avoid spillage when transferring used engine
    cooling liquids, engine and transmission lubri-
    cants, hydraulic oils, brake fluids, etc. Never
    mix used brake oil with fuel oil, or fuel oil
    with lubricants. Store safely until suitable
    disposal can be arranged according to national
    legislation or local regulations.
  2. Modern anti-freeze liquids and solutions, e.g.
    anti-freeze and other additives, must be replaced
    every two years. They must not be left to be
    absorbed into the ground, but must be collected
    and disposed of in a suitable manner.
  3. Do not open the air conditioning systems to carry
    out work. These systems contain gas which must
    not be released into the atmosphere. Contact your
    dealer or specialized personnel, who are equipped
    with the appropriate equipment and are authorized
    to refill the system.
  4. Any leakage or defect in the engine cooling or
    hydraulic systems must be repaired immediately.
  5. Do not increase the pressure in pressurized
    systems, as this may cause component parts to
    burst.
  6. When welding, make sure that hoses are properly
    protected as sparks or molten material may
    puncture or weaken the tubes and sleeves,
    resulting in leakage of oil, cooling liquid, etc.

SUGGESTIONS
  1. Avoid using unsuitable, pressurized filling
    systems or fuel cans when filling tanks, as these
    may cause considerable spillage and leakage of
    liquids.
  2. As a general rule, do not allow liquid fuels,
    lubricants, acids, solvents, etc., to come into
    contact with the skin. The majority of these
    products contain substances that are potential
    health hazards.
  3. Modern lubricants contain additives. Do not burn
    contaminated fuel oils and/or oils used in
    conventional heating systems.

10. Do not adjust the setting of the fuel
delivery system as this will alter the emission
of exhaust fumes. NOTE The engines installed on
the tractors comply with anti-pollution
legislation.
16
PRECAUTIONARY STATEMENTS
SECTION 1 - GENERAL INFORMATION AND SAFETY
  • PERSONAL SAFETY
  • Throughout this manual and on machine decals, you
    will find precautionary statements (DANGER,
    WARNING, and CAUTION) followed by specific
    instructions. These precautions are intended for
    the personal safety of you and those working with
    you. Please take the time to read them.
  • DANGER
  • This word DANGER indicates an immediate
    hazardous situation that, if not avoided, will
    result in death or serious injury. The color
    associated with Danger is RED.
  • WARNING
  • This word WARNING indicates a potentially
    hazardous situation that, if not avoided, could
    result in death or serious injury. The color
    associated with Warning is ORANGE.
  • CAUTION
  • This word CAUTION indicates a potentially
    hazardous situation that, if not avoided, may
    result in minor or moderate injury. It may also
    be used to alert against unsafe practices. The
    color associated with Caution is YELLOW.

FAILURE TO FOLLOW THE DANGER, WARNING, AND
CAUTION INSTRUCTIONS MAY RESULT IN DEATH OR
SERIOUS BODILY INJURY.
MACHINE SAFETY The precautionary statement
(IMPORTANT) is followed by specific
instructions. This statement is intended for
machine safety. IMPORTANT The word IMPORTANT
is used to inform the reader of something he
needs to know to prevent minor machine damage if
a certain procedure is not followed.
INFORMATION NOTE Instructions used to identify
and present supplementary information.
ASAE S441.3 FEB04 ISO 11684 VERSION - FEB 08
17
SECTION 1 - GENERAL INFORMATION AND SAFETY
IMPORTANT NOTES The machine is designed and
produced exclusively for agricultural use. All
other use will be considered to be contrary to
the use specified by CNH AMERICA LLC, who cannot
be held liable for damage to property or the
machine, or for personal injuries which may
result. Persons who risk improper use will
therefore assume the responsibility for any
consequences arising from such use.
OPERATOR PROTECTIVE STRUCTURE

WARNING
Your machine is equipped with an operator
Protective Structure, such as a Rollover
Protective Structure (ROPS) or Falling Object
Protective Structure (FOPS) or Cab with ROPS. A
ROPS may be a cab frame or a two-posted or
four-posted structure used for the protection of
the operator to minimize the possibility of
serious injury. The mounting structure and
fasteners forming the mounting connection with
the machine are part of the ROPS. The Protective
Structure is a special safety component of your
machine. DO NOT attach any device to the
Protective Structure for pulling purposes. DO NOT
drill holes to the Protective Structure. The
Protective Structure and interconnecting
components are a certified system. Any damage,
fire, corrosion or modification will weaken the
structure and reduce your protection. If this
occurs, the Protective Structure MUST be
replaced so that it will provide the same
protection as a new Protective Structure.
Contact your dealer for Protective Structure
inspection and replacement. After an accident,
fire, tip or roll over, the following MUST be
performed by a qualified technician before
returning the machine to field or job site
operation
Compliance with the instructions for use,
maintenance and repairs described in this manual,
are the essential preconditions for the use
specified by CNH AMERICA LLC. The machine must
only be used, serviced or repaired by personnel
trained in the relevant working methods and
safety regulations and who have been
authorized to work on the machine. The user must
also observe the rules concerning general safety
and accident prevention, including the Highway
Code when driving on public highways. Any
arbitrary modifications made to this machine will
release CNH AMERICA LLC from any liability
resulting from damage or injury. CNH AMERICA
LLC and all its distribution organizations,
inclusive of, but not restricted to, national,
regional or local distributors, cannot be held
liable for damage resulting from the malfunction
of parts and/or components not approved by CNH
AMERICA LLC. Under no circumstances will a
guarantee be issued for products made or sold by
CNH AMERICA LLC that are damaged as a result of
the malfunction of parts and/or components not
approved by CNH AMERICA LLC.
  • The Protective Structure MUST be replaced.
  • The mounting or suspension for the
    Protective Structure, operator seat and
    suspension, seat belts and mounting
    components and wiring within the operators
    protective system MUST be carefully inspected
    for damage.
  • All damaged parts MUST be replaced.

DO NOT WELD, DRILL HOLES, ATTEMPT TO STRAIGHTEN
OR REPAIR THE PROTECTIVE STRUCTURE. MODIFICATION
IN ANY WAY CAN REDUCE THE STRUCTURAL INTEGRITY OF
THE STRUCTURE WHICH COULD CAUSE DEATH OR SERIOUS
INJURY IN THE EVENT OF FIRE, TIP, ROLLOVER,
COLLISION OR ACCIDENT.
18
SECTION 1 - GENERAL INFORMATION AND SAFETY
WORKING SAFELY
1. During the manufacturing of this tractor,
every step has been taken to ensure safe
operation. However, the best way to avoid
accidents is to exercise caution at all times.
Once the accident has already happened it is too
late to remember what steps should have been
taken.
6. It is advisable to keep a first aid kit on
hand.
7. The tractor must only be used by responsible
personnel, trained in tractor use and authorized
to operate the machine.
8. Do not alter the injection system calibration
in an attempt to increase maximum engine speed.
2. Read this Manual carefully before starting,
using, carrying out maintenance, refuelling or
perform- ing any other type of operation on the
tractor.
  • The time spent reading this Manual will allow you
    to get to know your tractor, thereby saving time
    and effort. This will also help prevent accidents
    from taking place.
  • Read all the safety decals on the machine and
    follow the instructions thereon before starting,
    operating, refuelling or carrying out maintenance
    on the machine. Promptly replace any decals that
    are damaged, lost or illegible.
  • Clean the decals if they are covered by mud or
    debris.

10
5. Remember that the tractor is exclusively
designed for agricultural use. Any other use will
require prior authorization from CNH America LLC.
9. Do not wear loose clothing that may be
trapped in moving parts.
Check that all rotating parts connected to the
power take-off are correctly protected.
10. Do not alter the calibration of the pressure
relief valves in the various hydraulic circuits
(hydro- static steering, hydraulic lift,
auxiliary control valves, etc.).
19
SECTION 1 - GENERAL INFORMATION AND SAFETY
11. Avoid using the tractor in unsuitable
physical conditions, stop work instead.
17. Never start or maneuver the tractor unless
seated in the driving position.
12. Enter and leave the tractor using the steps
and handles provided. Keep these fittings free of
mud and debris.
24135
13. Always operate with the cab or roll bar
correctly and securely fitted on the tractor
periodically check that the fittings are not
loose and that all parts of the structure are
free from any damage and deformation. Do not
modify the roll bar by welding parts, drilling
holes, etc., as this could adversely affect the
rigidity of the structure.
STARTING THE TRACTOR 14. Before starting the
engine, check that the hand brake is on and that
the gears and power take-off are disengaged, even
if the tractor is fitted with a start-up safety
device. Never disconnect the start-up safety
switch. If the switch does not work correctly,
contact your local dealer for eventual repair
operations.
11
18. Before moving the tractor, always check that
the area is free of persons or obstacles.
  1. Before starting the engine, make sure that all
    attached implements are lowered to the ground.
  2. Before starting the engine, check that all covers
    and guards are correctly in position (roll bar,
    hood side panels, power take-off guard, front
    axle transmission shaft cover, etc.).

24134
12 19. Never run the engine in a closed space
without ensuring adequate ventilation. Exhaust
fumes are damaging to the health and can be
lethal.
20
Suggest If the above button click is invalid.
Please download this document first, and then
click the above link to download the complete
manual. Thank you so much for reading
21
SECTION 1 - GENERAL INFORMATION AND SAFETY
USING THE TRACTOR 20. Select the most suitable
wheel setting for the work in hand, i.e., the
setting that provides the best stability.
22. When travelling downhill, keep the tractor in
gear. Never release the clutch and never leave
the gears in neutral.
  1. When the tractor is moving, the operator must
    remain correctly seated in the driving position.
  2. Never get on or off the tractor while in
    movement.
  3. When using the brakes, press the pedal down
    slowly.
  4. Avoid curving at high speeds.

27. Always use the tractor at a speed that will
guarantee safe operation on the type of land
being worked. When working on uneven ground, use
maximum care to ensure proper stability.
24136
13
28. If you have to work with the tractor on a
gradient, for example on hillsides, drive at
moderate speed especially when taking curves.
21. Engage the clutch slowly if engaged too
quickly, especially when the tractor is getting
out of a hole, ditch or operating on muddy ground
or steep slopes, the tractor may
overturn. Release the clutch immediately if the
front wheels start to lift.
24137
24223
15
29. Proceed with maximum caution when working
with the wheels near the edge of ditches or
slopes.
14
30. When driving on public highways, observe the
Highway Code.
1-10
22
https//www.ebooklibonline.com Hello dear
friend! Thank you very much for reading. Enter
the link into your browser. The full manual is
available for immediate download. https//www.ebo
oklibonline.com
Write a Comment
User Comments (0)
About PowerShow.com