Instant Guide for Netgear AC1200 Range Extender setup

1
Best Ways For Netgear AC 1200 Wifi Range Extender
Setup
2
The Netgear AC1200 wifi range extender setup
allows users to extend their wifi signal to areas
with poor coverage. No special skills or tools
are needed for installation and it's easy. Once
configured, users can enjoy extended wireless
coverage throughout their homes. The Netgear
AC1200 wifi range extender works by taking the
existing wifi signal and amplifying it, allowing
users to reach areas of their home that
previously had weak or no signal.
There are two ways to set up a Netgear AC1200
WiFi range extender. Most of the time, the choice
between the WPS button and the installation
assistant depends on the user's preferences. It
depends on you which methods you want to adopt.
3
Manual Method For Netgear AC 1200 Wifi Range
Extender Setup

• Your Netgear AC 1200 range extender needs to be
  placed near your router. There must be a shared
  room between them.
• Ethernet cables can be used to connect the router
  and extender.
• Plugging the Netgear AC 1200 wifi range extender
  into a power source will turn it on.
• You need to connect your device to the Netgear AC
  1200 extender.
• The first step is to open a web browser, such as
  Google Chrome, Firefox, Safari, etc.
• Open the official Netgear extender website as
  soon as possible.

4

• The address bar allows you to enter mywifiext.net
  or 192.168.1.250.
• It is now possible to enter the correct login
  information, such as the username and password.
• The login page appears when you select Advanced gt
  New extender setup.
• An installation assistant for Netgear is
  available here, so you will need to follow all
  the on-screen instructions.
• It is now necessary to enter a security question.
• It is also possible to click Next.
• There are two network radio buttons (2.4 GHz and
  5 GHz).
• Next is now available for you to click.
• You can now enter your wifi password.
• For your Netgear AC1200 extender, you can also
  select the SSID and password.
• By tapping on the network wifi settings, you can
  connect your Netgear AC 1299 range extender.

5
How to Netgear AC1200 Wifi Range Extender Setup
With WPS Method

• Your Netgear extender must be placed in the same
  location as your router.
• When the LEDs are stable, you can attach your
  extender to a power outlet.
• Once this is done, you can press the WPS button
  on the extender until the WPS LED light blinks.
• WPS can be accessed by clicking the router's WPS
  button.
• You can unplug the WiFi extender halfway between
  your router and the area where you have poor WiFi
  reception.
• Wait until the power LED illuminates green after
  plugging the extender into an electrical outlet.
• Using the same WiFi password you use for your
  WiFi router, you can connect to the newly
  installed Netgear AC1200 extender WiFi network.
• After these steps, you can securely use your
  Netgear AC1200 wifi extender.

6
Wrapping Up
For the Netgear AC1200 wifi range extender setup,
use any of the methods above. It is imperative to
follow all the on-screen instructions properly so
you can complete the setup process smoothly.
7
LET'S CONNECT WITH US!
www.wireless-extender-setups.com
8
Thank You