Understand the procedure of brass-turned parts

1
Understand The Process And Mechanism Of Making
Brass Turned Pieces
2
What Is Brass Turned Parts?

• Brass turned parts are components that are formed
  mechanically and are, for the most part,
  rotationally symmetrical. Brass turning is a
  manufacturing technique that produces turned
  parts. In a similar manner, we speak of welded
  parts when we are talking about welding, laser
  parts when we are talking about laser cutting,
  and milled parts when we are talking about
  milling.

3
How Turning Process Takes Place?

• During the process of turning, the brass is
  fabricated with the assistance of lathes that
  double as turning-milling centers. A turning
  shape is used throughout this procedure in order
  to shape the turned components. Turning chisels
  typically rotate at speeds of more than 1,000
  revolutions per minute, which allows for the
  removal of superfluous material from the turned
  section. Both the turning speed and the feed rate
  that are used during turning are affected by the
  characteristics of the material, the tools, and
  the diameter that is being machined.
• In order to achieve the level of specialization
  that is sought in the manufacture of components,
  brass turned parts India offers tailored
  processes to its customers. They work hard to
  provide complete satisfaction for its clients,
  which enables us to maintain our position as the
  industry leader among brass turned parts India
  suppliers.

4
Understand The Procedure Of Brass Turned Parts?

1. In order to manufacture brass turned pieces, you
   need to begin with a piece of brass as your base
   material. Brass may be obtained from a variety of
   sources, including hardware shops and brass
   recyclers, among other possible locations. As
   soon as you have the brass in your possession,
   you may begin turning it into various turned
   pieces. You will need a turning tool and a lathe
   in order to complete this task.
2. Warm up the brass in the oven. Since brass melts
   easily at high temperatures, it is essential to
   pre-heat the metal before beginning to work with
   it. This will make the procedure simpler, and it
   will also reduce the likelihood that the brass
   will break.
3. Use a brass turner in your work. If you are new
   to brass turning, it is imperative that you get
   assistance from an experienced turner. Using a
   brass turner will make it much simpler for you to
   create flawless curves and forms.

5
What Are The Many Kinds Of Brass Turned
Components That There Exist?

• There is a wide range of brass turned pieces,
  each of which may be used for a specific purpose
  within a certain industry. The following are the
  three most typical varieties
• 1. Caps
• The most frequent kind of cap to be fashioned out
  of brass is the cap. They are placed over the
  open end of a tube, pipe, or other rounded item
  in order to cover or protect it.
• 2. Handles
• Round things are easier to hold onto if they have
  handles. Very often, they are crafted from a
  diverse assortment of resources, one of which is
  brass.
• 3. Buttons
• It is common practice to cover or protect the end
  of a rounded item with a button. Brass is often
  used in their construction.

6
Why Choose Brass Turned Parts?

• Brass is an advantageous material because of its
  strong tensile strength and great resistance to
  corrosion.
• Since it is also simpler to machine, brass is
  well suited for the production of complicated and
  sophisticated components that are used in a
  variety of sectors, such as water and plumbing,
  telecommunications, fire protection, electrical,
  and heating, ventilation, and air conditioning
  (HVAC).
• Since it is possible to produce a nice surface
  finish with brass as well, exposed brass will
  have the illusion of being of higher quality when
  it is shown.

7
http//www.asianfasteners.com/
mail_at_asianfasteners.com
Plot No. 3078, Road No.5, G.I.D.C.,PhASE-III Jamna
gar-361004 Gujarat, India.