Title: How To Reset Lexmark Ink Cartridge Chip - Inkservicecenter.com
1How To Reset Lexmark Ink Cartridge Chip
https//inkservicecenter.com/how-to-reset-lexmark-
ink-cartridge-chip/
2Resetting the Lexmark Ink cartridge chip is one
of the most common and annoying problems that
users face and can annoy them when they do not
know how to reset the Lexmark Ink cartridge chip
without unwanted technical errors. Buying a new
Lexmark ink cartridge can be a very boring task
given the fact that users refill old cartridges
when they run out of ink. This method works for
most printers, but Lexmark printers come with
advanced chips and features. These chips allow
users to obtain accurate information about empty
cartridges.
However, when the refilled cartridges are not
placed properly, these chips also cause some
problems for the users. In some cases, these
chips tell the printer that the ink cartridge is
still empty. But dont fret because these issues
can be fixed by resetting the ink cartridge chips
if you know how to reset the Lexmark ink
cartridge chip. To reset the cartridge chip,
users need to choose exactly one of the methods
and techniques outlined in this article. If you
are unable to complete any of the steps, you can
take the help of expert technicians.
3 Steps To Reset Lexmark Ink Cartridge Chip
Problems!
- First, users should turn off the Lexmark printer
by removing all power sources and cords. - After that, purchase a desirable refill-kit for
your Lexmark printer. - Users should now turn on the printer by pressing
the Ready and Back buttons. - Press and hold the button until the self-test
page appears on the printer display. - After that, users have to enter the diagnostic
mode and select the Maintenance Calculation
option. - After that, choose the Reset option. This will
automatically reset the ink level and you will no
longer have low ink or chip reset errors. - After that, users need to go back to the
Diagnostic Mode menu by pressing the Back button. - Finally, try printing to check the status of the
Lexmark printer.
4 Detailed Manual Steps to Effectively Solve
Lexmark Toner Chip Problems!
- If you have tried the steps listed above and
still cannot reset your toner chip, here are the
steps you should follow to get a better and
reliable printing experience from your Lexmark
printer. - Firstly, users need to go ahead to get detailed
information about Lexmark Toner Cartridge Chip
Reset and reset cartridge chip. Make sure the
printer is turned off and unplugged from all
possible power sources. - Thereafter, users need to press and hold the
Ready and Back buttons to restart the printer
after receiving the desired notification that a
self-test has been run. When users receive this
message, they are automatically redirected to
diagnostics mode. After this, users will have to
select the Pussy Maintenance option. - From the available options, users should select
Reset to understand how to reset the Lexmark
toner chip. When users select the reset options,
the ink level calculation is reset automatically
and users stop receiving low ink errors while
printing. After that, come back to Diagnostic
Mode and then back to Normal Mode.
5- When users try to refill a blank ink cartridge
they need to deal with detection issues, the
Lexmark printer comes with a smart chip and it
doesnt allow the printer to read it properly. - After that, users have to follow the initial
steps to remove the empty Lexmark ink cartridge
and refill the cartridge by following the proper
steps and ink refill kit only. - Now users need to put a golden chip on the
cartridge which can be easily found on the front
side of the cartridge. Also, make sure that all
pins are properly placed when you perform the
reset process. - If you get a red light, sometimes wait as it
indicates that the chip is busy. Wait for it to
turn green. - Detailed Solutions To Perform How To Reset
Lexmark Ink Cartridge Chip Problems! - When the troubleshooting steps listed above do
not work, you can easily follow in-depth
solutions to eliminate chip problems.
6(No Transcript)
7Thanks!