Know How to Connect Fiber Optic Cable to a CCTV Camera

1
Pointers on
How to Connect CCTV Camera with Fiber Optic
Cable
In a general copper cable network which has a
CCTV camera connected to it, the camera signals
are converted from analog to digital and then
again to analog during display. It is a bit
different when it comes to fiber optic or
blended networks. Here are some pointers on how
to connect CCTV camera with fiber optic cables
in a blended network. Pointers In a blended
network, the analog signals from the camera are
converted to light or optical signals which are
transmitted over a fiber optic cable. You
require a device which converts these signals
again to analog for a normal display of video
footages or even live transmissions. Digital
video optical converters do this job. Ensure the
device is compatible with the other network
devices and the camera. Also, make sure the
converter has a simple plug-and-play design which
makes both installation and use easy. Using a
fiber optic cable for transmission is beneficial
as it eliminates issues such as EMI and other
environmental disruptions. Also, it supports
long geographical distances. All you need here is
a fiber optic cable and connector along with
digital converter. You simply need to place the
cable between the display or computer and the
CCTV camera. Usually, a multimode, double
stranded cable would be good. Ensure there are no
splices in the camera and display links. Use the
right connector for both ends of the cable to
connect it and ensure to leave enough space for
other network devices if any. Place the
transmitter at the camera end of the cable and a
receiver at the computer or display end. Ensure
the transmitters and receivers are enclosed and
protected. Power both of these through available
power supplies or PoE Switches. Connect the
transmitter to the camera with any normal
Ethernet cable and the receiver with the
computer display in the same way. Make sure the
transmitter gets the power supply and switch it
on. Now, check if this network is working and if
the footage collected by the camera can be
displayed on the screen with the required
clarity. Do note that this is a simple version of
such connectivity. As most networks are now
complex, more cabling and devices may be
required based on the network design. To know
more about How to Connect Fiber Optic Cable to a
CCTV Camera Visit https//www.versitron.com/