Do You Need Planning Permission For A Water Tank In Canberra Australia?

1
Capital Water Works

• Capital Water Work have 40 years of experienced
  to supplies water tanks in Canberra

Visit
2
Do You Need Planning Permission For A Water Tank
In Canberra Australia?

• If you look at the landscape in Australia, then
  you will find water tanks an integral aspect of
  it. Canberra is also not an exception.
• The increase in population and change in climate
  result in a water shortage. Hence, water tanks
  have become a necessity.
• Every state and council throughout the country
  adopts new rules and regulations to build water
  tanks. It is important to know them.

Continue
3
Do You Need Planning Permission For A Water Tank
In Canberra Australia?

• Whether you are an existing homeowner or
  planning to buy or construct a home in Canberra,
  you must know the Canberra water
  tanks guidelines.
• In general, throughout Australia, there are some
  basic guidelines about water tanks. Whether you
  construct a concrete tank, poly water tank, or
  expandable tank, it must be leakproof and
  sanitary.
• Local councils determine local rules based on
  their needs. Hence, they differ up to some
  extent.

4
Regulations In Canberra

• While installing water tanks Canberra, you have
  to get the planning and building approval. The
  authorities should know the location, size, and
  installation of the tank. You must ensure that it
  does not impact the amenity of residents.
• There are some exemptions to it. That you should
  ask and confirm. For example, you do not need
  permission to install a rainwater tank if its
  size is less than 20000 liters or it is not
  located in a heritage-listed area, etc.
• For cases where the tank is installed within 1.5
  meters of a side or rear boundary of the block,
  or the tank is forward of the front building line
  and not buried, you have to take approvals.

Continue
5
Regulations In Canberra

• If you contact a water tank supplier
  Canberra, then he will inform you about the rules
  and regulations. The suppliers know what the
  latest guidelines are.
• Tanks cannot be constructed within easements or
  within the so-called protection envelope for
  utility services. The permissible distance has to
  be confirmed by local authorities.

6
Conclusion

• Remember, the digging should be started only
  after getting confirmation that no gas, sewer,
  water, stormwater, or communication assets is
  getting damaged by that.
• Not only for the construction work, but you need
  to get plumbing approvals also. All plumbing
  should be done by a licensed plumber who meets
  the requirements of ACT plumbing legislation.
• If you are installing a rainwater tank, then its
  plumbing system and potable water plumbing should
  not have any direct connection. Make sure that
  the plumber submits a certificate of compliance.
• Thus, you need several planning permissions to
  construct a water tank in Canberra.

7
Some relevant link

• https//loreblogs.com/how-do-you-prepare-ground-f
  or-water-tank/

8
Contact Us Wed Love to Hear from You.Just
choose the most convenient method 

• Add - 5 Wallace Place,Melba ,Australia,ACT (
  Australian Capital Territory ), 2615
• 02  6258 1378
• capitalwaterworks_at_bigpond.com
• Visit - https//www.capitalwaterworks.com.au/