Leading Hydraulics Manufacturer

1
Oriental Engineering Works Pvt. Ltd

• Oewin.com

2
About Us

• ORIENTAL ENGINEERING WORKS PVT. LTD. was
  established in 1933 at Lahore (now in Pakistan)
  and began with the Manufacturing Services of Cold
  Start Horizontal Diesel Engines. The company was
  shifted to its present premises after the
  partition of India.Later, the company stated the
  manufacture of Hydraulic Equipment and is
  presently manufacturing High Pressure Cylinders,
  Pumps and Hydraulic Systems up to 700
  Bar(10,000psi).The company is certified for ISO
  90012008 ISO 140012004 by TUV Cert-Germany.
  Majority of its products comply to ASME
  B30.1-1998 and ISO 10100-2001 are also CE
  marked. The accessories used, also conform to SAE
  J 517 for hydraulic hoses EN 837-1 for pressure
  gauges.

3
Our Products

• Tangee
• Roemheld
• Tractel
• Impulse

4
Telescopic

• Multi stage cylinders meant for large strokes in
  restricted closed heights. Also available (on
  request) agt double acting models bgt larger no. of
  stages.
• Hard chrome plated steel piston rod.
• Female half coupler dust cap provided on all
  models.
• Please contact nearest dealer for cylinders with
  capacities strokes not mentioned in the data
  sheets. All variations are possible on request,
  subject to confirmation from the dealer.

5
Air Hydraulic Pump

• Air Hydraulic Pumps are designed for fast
  operation, greater versatility and durability.
• Ideal pump where Shop-Floor air is available at 7
  bar.
• Carrying handles are of treadle design, which
  allows easy operation by hand and foot.
• Built in Relief Valve protects hydraulic system
  components regardless of air pressure.
• Assembly can be done to fit on larger reservoir
  (if required).
• Provides greater speed at low cost.
• Positive holding even if air pressure turned off.
• It is recommended to attach a Filter-Lubricator
  unit at air inlet.

6
IMPULSE

• The pumps are available with various options of
  encasing and capacity.
• Impulse pumps are specially designed to control
  groundwater levels. The construction of these
  pumps have quite a few advantages in the
  dewatering/fluid-transfer process. (low running
  cost, great reliability, highest efficiency in
  its category, spares and service friendly).
• The reciprocating type can run dry.
• GPS, PLC etc. are also available as options.

7
Contact Us

• Address
• Oriental Crossing, Industrial Area Yamuna Nagar
  135 001 (Haryana) India
• Contact No.
• 91-1732-251750, 290750, 651750, 251755
• Email
• info_at_oewin.com