How to Know Your Garage Door Sensor is not Aligned (1)

1
How to Know Your Garage Door Sensor is not Aligned
2
How to Know Your Garage Door Sensor is not Aligned
Things to Look for to Detect Misalignment of
Garage Door Sensor
If you think that your garage door is not working
properly due to a misaligned garage door sensor,
you need to check whether the stored item or
object is hindering the light beam in-between
those two units. If there are any such
obstructions, you need to remove them without
causing any damage to wires or sensors. After
that
3
How to Know Your Garage Door Sensor is not Aligned

• Find the Photo-Eyes of Your Garage Door One out
  of the two garage door sensors is installed on
  the left side and another one on the right side.
  Both of them are installed within the garage door
  opening. The exact shape, design, and appearance
  of this sensor depend on its brand and
  manufacturer.
• Also, determine the status of the sensors
  installed on the door by looking at the LED
  light. When looking at garage door sensor lights,
  these must-have steady green lights. No light or
  flashing red light indicates misalignment. If the
  lights are working fine but the doors are not
  working, you need to look for dirt, debris, or
  dust on the lens and clean it with a soft cloth.

4
How to Know Your Garage Door Sensor is not Aligned

• You even need to measure the height of every
  sensor to see if theyre aligned. Both sensors
  must be at similar heights, facing each other. If
  they are not at the same height, this means they
  are not installed properly. The best way is to
  take the help of the garage door repair expert to
  fix the issue.

5
How to Know Your Garage Door Sensor is not Aligned
Can Misaligned Garage Door Sensor Be Fixed?
If there is no damage, you can simply adjust the
misaligned garage door sensor. First, you need to
loosen the screws on its pivot brackets and then
move the device up/down. Once the adjustment is
done, test the garage door sensors. For this, you
need to keep a cardboard box under the door and
activate its switch. The system must be able to
detect an object near the door. However, if the
issue persists, you may consider garage door
sensor replacement with the help of a replacement
expert.
6
Reasons to Choose Clopay Garage Doors for Your
Home
Address 1291 Simpson Way Ste. C City
Escondido State CA Postal code 92029 Country
United States Office Phone No. 800-576-1397 Email
Id info_at_castleic.com Website -
www.castlegaragedoors.com
Follow us on Social