re.rockspace.local | ap.setup

1
https//rerockspace-locals.com/ap-setup/
2
About Us

• In this article, you will get step by step
  instructions on how to setup and install your
  Rockspace local wireless extender through the
  https//ap.setup wizard page. Ap.Setup is an
  offline web page where you can configure your
  Wifi extender of any brand pretty easily within
  few minutes. If you wish to improvise the
  extenders wireless setting, you can do the same
  in the dashboard available through Ap.Setup. Next
  time onwards, browse the assigned IP address of
  the extender by your router to login to your
  extenders settings page. After setup you can
  access the internet from any corner of your house
  at the routers original bandwidth.

3
How to set up and install your Rockspace Wireless
Extender through ap.setup wizard?

• 1. Firstly, You need to plug Rockspace wireless
  extender. Please note that your Rockspace
  wireless extended should be in the range of your
  existing WiFi router. It helps you to set up the
  router easily..
• 2 Open any web browser on your computer and on
  the address bar, enter the URL either http//ap.se
  tup  or the IP address http//192.168.0.50.
• 3. Now login page will automatically pop up on
  your computer screen and will begin its process.
• 4. This page may ask you for login credentials,
  please go through the manual or sticker paste on
  the router itself for login details.
• 5. Now you will see wizard homepage, please click
  on the next button to continue or follow the
  instructions.
• 6. Go to the wireless setting of your computer to
  scan for all nearby available
• networks, it will show a list of available Wi-Fi
  networks in range, please select the Rockspace
  local extender network and click on connect.
• 7. Once you click on connect, it may ask for the
  network security password. You can find the
  security key on the back or bottom side of the
  Rockspace local extender.. If it is an open
  Wi-Fi, click on the Next button to continue.
• 8. Once done, you will get a re.rockspace.local
  login wizard screen to set up a new SSID name and
  password. Click next to continue.
• 9. The setup process is now complete. Now you can
  move your extender anywhere within the of your
  existing router and you can also connect your
  wireless devices on Rockspace local extender by
  using new SSID and security key.

4
Trying to change the Admin Password Rockspace
Local Wireless Extender ?

• Make sure that your computer is connected on the
  Rockspace Wireless Extender network.
• Always use wired connection for this process.
• The default Username is admin and password is
  nil for all Rockspace Wireless Extender.
• Default login credentials can be different for
  some particular models. To check that, please go
  through the product manual.
• 192.168.1.1 is the default web address for
  ap.setup web page.
• Do not forget to clean the caches from the
  browser.

5
Gallery
Re.rerockspace.local extender local
setup Essentially, the wireless signal of any
router can be strengthened or repeated to give
full signal coverage in dead zone areas and this
is proved by the rockspace local  Wireless Range
Extender. The arrangement for this type of
connection through Rockspace local Extender must
be done while offline mode of re.rockspace.local
or Http//re.rockspace.local 
RS Wi-Fi App  Connect the Rock Space Mesh
modeThe primary mode you set up is the basic
mode, while the rest regions are secondary nodes.
On the off chance that it doesnt create much
difficulty, you can power ON one Mesh initially
and connect the other Mesh after you set the main
Mesh to the web on the Apps
6
Contact us
Website- https//rerockspace-locals.com/ap-setup/
Address- 2198 Finwood Road, Newark, New Jersey,
07102 Contact no.- 9177320091