Need to Know About Tribo-electrostatic Mineral Separator

1
(No Transcript)
2
Need to Know About Tribo-electrostatic Mineral
Separator
ST Equipment Technology manufactures a
Tribo-electrostatic Mineral Separator that
provides a high rate, continuous and completely
dry method to beneficiate minerals and metals
across a broad range of particle sizes. The STET
separator provides an alternative to wet
processing methods and drastically reduces or
eliminates the need for water in minerals
processing.
3
Calcium carbonate The STET separator has been
successfully for the removal of quartz and other
acid insoluble contaminants from finely ground
calcium carbonate used as a filler or whitening
agent.
4
Limestone Our separator has been proven in
removing silicates and other contaminants from
cement rock limestone prior to calcination, to
extend the life and maximize recovery from cement
rock deposits.
5
Barite We have both pilot scale and commercial
experience processing barite to remove gangue
such as silicates, iron and alumina.
6
Talc - The STET tribo-electrostatic belt
separation technology is effective in removal of
magnesite, quartz, and dark colored contaminants
from finely milled talc.
7
Iron Ore - Dry processing of iron ore presents an
opportunity to eliminate costs and wet tailings
generation associated with flotation and wet
magnetic separation circuits. STET has evaluated
several iron ore tailings and run of mine ore
samples at bench scale.
8
Contact us
Website https//steqtech.com/ Address 101
Hampton Avenue Needham, MA,
USA 02494 Mail Id info_at_steqtech.com Phone
No. 1 [phone]