PROCESS OF REVERSE ENGINEERING BY TOP COMPANIES IN DUBAI - PowerPoint PPT Presentation

About This Presentation
Title:

PROCESS OF REVERSE ENGINEERING BY TOP COMPANIES IN DUBAI

Description:

If you are looking for the right place to ensure the perfect process of engineering companies in Dubai, Falcon 3D is the right place for you. – PowerPoint PPT presentation

Number of Views:105

less

Transcript and Presenter's Notes

Title: PROCESS OF REVERSE ENGINEERING BY TOP COMPANIES IN DUBAI


1
PROCESS OF REVERSE ENGINEERING BY TOP COMPANIES
IN DUBAI
http//www.falcon3dme.com/
2
  • Reverse Engineering is the process of
    redeveloping the original product with its exact
    measurements of dimensions. The need for reverse
    engineering arises in the case if the
    manufacturer doesn't exist or make that
    particular product. The fact is that the entire
    process of reverse engineering can be highly
    time-consuming and challenging.
  • However, using 3D scanning for reverse
    engineering can be efficient. It generates a 3D
    CAD model from the original product by capturing
    millions of measurement points. It is said to be
    an extremely beneficial and cost-effective
    process. The below-mentioned details would
    describe the step-by-step process of 3D reverse
    engineering used by several mechanical
    engineering companies in the UAE.

http//www.falcon3dme.com/
3
  • Preparation to ensure the accuracy
  • For increasing scan accuracy, sprinkle the
    temporary matte powder on the product. The
    quality of the scan can be affected even by a
    little shining surface. Kindly, note that without
    a matte coating, transparent and reflective
    surfaces can't be scanned.
  • Scanning the critical sections
  • For capturing the critical sections of the
    product, always use a highly accurate 3D scanner.
    Many engineering companies in Dubai use laser
    scanners, as it is considered an ideal tool that
    provides a hundred percent accuracy. If the
    product has deep holes, multiple rescanning and
    orientation are required.

http//www.falcon3dme.com/
4
  • Processing to bring the finishing
  • Small gaps can be repaired, and the scan can be
    simplified using scanner software. By doing this,
    the data can be easily managed in CAD. Therefore,
    without damaging the essential details, try
    reducing the model as much as possible. The next
    is to import the data into the CAD software that
    has tools for reverse engineering.
  • Surfacing to ensure perfection
  • For creating a robust model that can be edited
    using CAD, there are three ways to extract the
    essential surfaces and are described below.

http//www.falcon3dme.com/
5
  • Semi-automatic surfacing
  • It is quite challenging to draw the complex
    curved surfaces manually. Hence, semi-automatic
    surfacing seems ideal. Surfaces that fit the best
    with the model are generated using this type of
    surfacing.
  • Automatic surfacing
  • From any watertight scan, a solid model can be
    generated using automatic surfacing. For any
    addition or subtraction, standard CAD tools can
    be used. However, it is not easy to alter the
    basic characteristics. You will notice after
    comparing the results of the above two types of
    surfacing that the model is a little less
    accurate, particularly around fine edges.
  • Manual redrawing
  • Manual redrawing is considered the most accurate
    and quick way for features like pockets or holes.
    The scan model can be used as a reference for the
    same.

http//www.falcon3dme.com/
6
Integration Print
  • For creating the jig that holds the original
    product, the scan can be subtracted from another
    solid body, once it has been converted to a
    solid. The dimensions of the scan are the
    reference for the new product's design. The last
    step is to print that jig using a highly accurate
    3D printer, and the final reproduced product is
    ready for use.
  • Hence, if you are looking for the right place to
    ensure the perfect process of engineering
    companies in Dubai, Falcon 3D is the right place
    for you. Reach out to the company to get the best
    assistance at all times.

http//www.falcon3dme.com/
7
Contact US
For more Details Contact Us Phone 971 (0) 4
327-1414 971-4-388-6888 Fax
971-4-327-1413 Email info_at_falconsurveyme.com
Office Address 209, Apricot TowerDubai
Silicon OasisP.O. Box 238544, Dubai United
Arab Emirates
http//www.falcon3dme.com/contact.html
8
(No Transcript)
Write a Comment
User Comments (0)
About PowerShow.com