Title: Main Causes for a Malfunctioning Pool Pump
1Main Causes for a Malfunctioning Pool Pump
2If you want your pool to remain clean and
functional, one of the key components to look
after is the pump.
3As the pool pump and its motor run all the time,
break down and failure of this part cannot be
eliminated.
4When the pool pump starts to malfunction, it is
better to be first to recognize the faults.
5By knowing the main causes of pool pump damage,
you can either prevent it from happening or call
the pool professionals early and save your pool.
6Worn impeller
7 Pool pump contains a component called an
impeller, which is responsible for pushing water
through the pump system.
8If your impeller is worn, you may notice that
your filter pressure gauge reading is low.
9A clogged skimmer basket or pump strainer may
indicate excessive pump impeller wear.
10You will observe that your gauge readings are low
on a routine basis.
11Broken seal
12In order to function properly, your pump needs to
be tightly sealed to the pump housing with an O
ring.
13With improper maintenance, this rubberized ring
can break or wear out over time.
14If your pool pump seal is broken, you may notice
water spraying from the pump housing.
15When the seal breaks, pressurized water will be
sent out of the pump with a great deal of force.
16Damaged motor shaft
17Inside your pool pump, a motor provides power to
all of the moving pump components.
18If your motor shaft becomes damaged, the
performance of your pool pump may become
compromised.
19One top sign of a damaged motor shaft is leaking
water underneath your pump.
20When you suspect that your pool pump is
experiencing problems, contact a pool service
company for repairs.
21Visit Us
https//spearpoolrepair.com/