Steps Involved In The Process Of Concrete Resurfacing in Sydney - PowerPoint PPT Presentation

About This Presentation
Title:

Steps Involved In The Process Of Concrete Resurfacing in Sydney

Description:

There are umpteen steps which are involved in the process of concrete resurfacing. It is always advised to call in concrete restoration Sydney experts who will take the following steps. For knowing all these steps you should to have a glance here. Garner more information by visiting here. – PowerPoint PPT presentation

Number of Views:29

less

Transcript and Presenter's Notes

Title: Steps Involved In The Process Of Concrete Resurfacing in Sydney


1
STEPS INVOLVED IN THE PROCESS OF CONCRETE
RESURFACING IN SYDNEY
2
(No Transcript)
3
A worn walk-away could be a sore in the overall
landscaping or exteriors of the property. The
good news is that if it is made up of concrete,
giving it a new look will be absolutely easy with
the help of concrete resurfacing in Sydney. As
you decide to do this, you fix its destiny that
includes a brand new, durable surface with
uniform color and a wonderful look all over
again. But this would require efforts and thus,
it is always advised to call in concrete
restoration in Sydney experts who will take the
following steps.
4
Step 1 - Clean the Concrete
  • The first step involves cleaning the concrete
    area and for this, experts are involved, but only
    after getting equipped with PPEs like protective
    boots, goggles, helmet and so on.
  • They will actually blast off surface dirt with a
    gas-powered pressure washer that can reach at
    least 3,500 PSI and this is why wearing PPEs is
    mandatory for them.
  • They will also engage in the process of concrete
    washing to set the area free from algae, mildew,
    etc.

5
Step 2 - Patch Spalled Areas
  • While the concrete is damp, the concrete
    restoration Sydney experts will mix the
    resurfacer to fill the divots present there.
  • They will combine 1 part water with 7 parts
    resurfacer in a 5-gallon bucket blend with a
    paddle mixer attached to a corded drill.
  • Then, they will fill the recesser with this
    resurfacer and smooth the area with a finish
    trowel.

6
Step 3 - Spread the Resurfacer
  • The next step of concrete resurfacing Sydney
    involves filling the walkway joints with
    peel-and-stick foam weathers tripping, and
    dampening the concrete.
  • Here, it is important to know that the resurfacer
    will be ready to work in about 30 minutes and
    when ready, it will be enough to cover two
    sidewalk slabs.

7
Step 4 - Trowel It Out
  • They will then, spread the resurfaces and they
    will further make it slip-resistant after waiting
    for 5 minutes.
  • In 5 minutes time, they will sweep a
    nylon-bristle broom across it, 90 degrees to the
    foot traffic.

8
Contact Us
www.cobblecrete.com.au
Address PO Box 1124 Camden 2570 Phone No.
1300 784 002 E-Mail info_at_cobblecrete.com.
au
Write a Comment
User Comments (0)
About PowerShow.com