Top ISO Registration & Certification facts | Corpstore

1
Top Importance of ISO Certification

• Quality is when the customer returns and the
  product does not a famous quote says the
  importance of quality of the products in one
  line. You would commonly hear from people Is
  this ISO certified which means whether it is
  really qualified. So International Organization
  for Standardization states genuine of a
  product. When a product is ISO certified then it
  means it has greater quality and gains confidence
  among the public without them having second
  thoughts. ISO means International Organisation of
  Standardisation. Its headquarters is in Geneva.

2
Importance

• International Organization for Standardization
  was formerly found on 23, February 1947 in
  London, United Kingdom. From 25 countries
  delegates gathered to facilitate international
  coordination and unification of industrial
  standards. National standardisation activity
  began in India, with Indian Standards Institution
  under Societies Registration Act 1860.Beaurea of
  Indian Standards Act passed in 1986 and BIS came
  into being on 1 April 1987.BIS is national
  standards body in India.
• ISO registration in Coimbatore follows the steps.
  Firstly application must be created. Both
  applicant and registrar should discuss on
  liability issues and the access rights. Then
  documents review is done. The International
  Organization for Standardization auditor will
  view the documents and quality manuals. And you
  should Make an Action plan through which the
  employees work efficiently and aware of
  standards. And then Initial Certification Audit.
  It is followed by Complete ISO certification and
  Surveillance audits.

3
(No Transcript)
4
Document Requirement

• ISO certification in Coimbatore requires
  following documents.
• Scope of Quality Management System
• Quality policy (clause 5.2)
• Quality objectives (clause 6.2)
• Criteria of evaluation and selection of
  suppliers. (clause8.4.1)

5
Various Standards of ISO

• International Organization for Standardization
  published 22598 International Standards. ISO
  registration in Coimbatore describes some
  standards of ISO. These are as follows
• International Organization for Standardization
  9001 is given for quality management. ISO 18001
  is given for Occupational health and safety
  management. International Standards Orgaization
  27001 is given for Information media security
  system. International Organization for
  Standardization 4217 is given for Currency codes.
  ISO 14001 is given for Environmental management.
  International Standards Orgaization 22000 is
  given for Standards for food safety.
  International Organization for Standardization
  5001 is given for Energy management.

6
(No Transcript)
7
Do you know ISO 9000 series?

• There are International Organization for
  Standardization 9000, ISO 9001 and International
  Organization for Standardization 9004.
  International Organization for Standardization
  9000 is not a certificate. It explains basic
  principles of standardisation, the language and
  vocabulary. ISO 9001 is an ISO certification proce
  ss. International Organization for
  Standardization 9004 says how performance and
  standards can be improved. Let us see to the
  Timeline of the ISO 9001. Initially Technical
  committee 176 was formed in1980.Then first
  edition was made in 1987.Then in 1994 First minor
  revision was made.
•  Later in 2000 First major revision was made.
  Then in 2008 Second minor revision was formed.
  Finally second major revision was made in 2015.

8
What is Quality Management Systems?

• ISO registration says that QMS is a way of
  defining how an organisation can meet
  requirements of the customers and stakeholders.
  So objectives like quality and meeting customer
  needs should be specified. In this International
  Organization for Standardization 9001 is the best
  Quality Management Standard. Because it is based
  upon continual improvement. Now a new version of
  ISO 90012015 is being used. It replaced ISO
  90012008 which is the older version.
  International Organization for Standardization
  9002, ISO 9003 were combined to form new
  International Organization for Standardization
  90012015.

9
Now the International Organization for
Standardization 90012015 requires following 10
new clauses.

• Scope,
• Normative references,
• Terms and definitions,
• Context of the organisation,
• Leadership,
• Planning,
• Support,
• Operation,
• Performance evaluation,
• Improvement.

10
(No Transcript)
11
ISO Consultant and International Organization
for Standardization Certification

• When ISO certification is revolving then there is
  possibility for obtaining bogus certificate. Some
  data may be stolen and an International
  Organization for Standardization template will be
  made and can be sold out. So its important to
  choose right International Organization for
  Standardization consultant for obtaining the
  certification. International Organization for
  Standardization consultant should be aware of the
  standards and training must be given.
• When you approach a wrong consultant they will
  provide an ISO certificate with wrong website
  address. And when you use it then the end user
  will be dissatisfied by you.
• Also if you go for any Government tender or
  frontline companies you cannot supply your
  products. So it is important to approach
  right ISO consultant.

12
Specification of International Organization for
Standardization

• ISO certification in Coimbatore gives details
  about GDT and it is available for ISO.GDT is
  Geometrical Dimensioning and Tolerencing.
  International Organization for Standardization
  GDT standard is part of Global Product
  Specification series. It is produced by ISO
  technical committee TC213.Some International
  Organization for Standardization dimensioning
  standards are developed by Technical committee
  TC10.
• TC10-It says about Technical product
  documentation.
• ISO128 Technical drawing-indication of dimension
  and tolerances
• ISO7083 Symbols for geometrical tolerencing
  -Proportions and dimension
• ISO13715 Technical drawings-edges of undefined
  shapes-Vocabulary and indications.
• ISO15786-Simplified representation and
  dimensioning of holes.

13
(No Transcript)
14
Dos and Donts

• Do refer International Organization for
  Standardization in a fairly.
• Do use ISO standards with full reference.eg.ISO
  90012015.
• Dont use ISO in website or in domain name. For
  example isodatabase.
• Dont use International Organization for
  Standardization in products name like
  ISOfurniture.

15
Conclusion

• Thus, when International Organization for
  Standardization certificate is obtained then it
  implies that reliable and safe products are
  delivered, then the defects, waste and errors are
  rectified by the company itself. So there will be
  improvement and passes over the cost benefit to
  the customer. If one has to advertise the quality
  of the company ISO registration is needed. Upon
  buying products price, quality and company is
  considered. It helps in increasing capability and
  credibility.    

16
Hope this slide is helpfully.If you want to know
more about ISO, Kindly Visithttps//www.corpstor
e.in/iso/iso-consultants-coimbatore.php