LED Flood Lights With Extended Lifespan For Long Life Lighting

1
Top 3 Ways To Extend The Lifespan of LED FLOOD
LIGHTS!
www.ledmyplace.com
2
LED Flood Lights At A Glance
The industrial or commercial users are gradually
losing faith in HIDs, metal-halides or
sodium-potassium lamps with the increasing need
for high-intensity, directional and broad-beamed
lights to cover huge spaces. LED Flood Lights
being available in so many wattages, sizes,
shapes and design have come to be known as
perfect outdoor lighting fixtures. They are not
only cost-effective in the long-run, they emit
light that resembles natural light. Further, the
ease of installation along with product safety
make these flood light fixtures unique in every
way possible. When opting for LED Flood Lights,
these bring you energy-savings of not less than
75. Further, they are easily disposable being
environment-friendly and also last longer. One
can go on and on about such LED lighting
fixtures, but its not the advantages that an
user always wants to know. You often are
interested in knowing about the ways in which you
can maintain such light fixtures so that they
last as long as possible.   So, heres a short
guideline to keep your LED Flood Lights always in
check.
Ask yourself if you are misusing the LED Flood
Lights
When a regular light bulb burns out, you know
frequent switching On and Off of the bulb along
with the bulb getting overheated was what led to
its burning out. Almost same is the case with LED
flood lights. Make sure you do not keep these On
for excessively long periods of time and
especially when you need no lighting. The
customer records tell us that the more you
overuse these lights, you will shorten their
lifespan. So, make sure you turn Off these lights
when not in use or at best make use of motion
sensors to automatically do this job for you.
www.ledmyplace.com
3
Make Correct Use of Wattage Rating
The LED flood lights will always come to you with
accurate manufacturers instructions that will
tell you about the correct usage of wattage
rating. If a fixture is intended to be used for
100W and if you retrofit the fixture with LED
Flood Light of 200W, this will sooner or later
put enough load on the circuit breaker to make
these flood lights eventually fail. At the same
time, you need to be careful about the voltage
application. Some LED flood lights are designed
for high voltage only and if used in voltage
source which is meant for low voltage may cause
the flood lights to burn out immediately.
     So, make sure, you always pay attention to
wattage or voltage rating.
Take Care of Operating Temperature Range
Though LED lamps are known for operating under
wide range of temperature conditions and do not
usually get affected by extreme hot or cold, yet
these lights must be kept in moderate
temperatures. Prolonged use in extreme cold or
hot condition may affect its brightness level and
ability to appropriately illuminate a place.
Secondly, you must make sure that your flood
light lamp is enclosed in die-cast aluminium
cover to protect against rough weather condition,
corrosion or damage. Also, keep these flood light
fixtures away from hot furnaces, heaters or ACs.
www.ledmyplace.com
4
The Key Takeaway
If LED Flood Lights are put to right use, these
will definitely last longer than their specified
lifespan of 50,000 hours.
www.ledmyplace.com
5
THANK YOU
www.ledmyplace.com