Things that Should not be Ignored for Rack Safety

1
Things that Should Not be Ignored for Rack Safety
2
One of the most overlooked areas of warehouse
layout is the safety of the racks which is
required for guarding the people and the products.
3
Rack systems should be inspected by a qualified
rack system inspector at least once a year, more
often if there is frequent damage.
4
Also, the results of the inspections should be
documented and maintained for future reference.
5
While a visual inspection will show obviously
damaged it is very important not to ignore a few
simple steps for the safety of the racks.
6
Do not overload the rack beyond its capacity
7
The rack capacity should be provided by the rack
manufacturer and hung in a clearly visible place
at the end of each aisle.
8
These sign boards show both the load capacity and
approved beam spacing configuration.
9
Use appropriate safety accessories throughout
the rack system
10
There are a number of accessories that can be
used along the racks to provide additional safety
in the warehouse.
11
Safety netting will prevent items from falling
off the rack, column protector and end of aisle
guards protect uprights from forklift damage.
12
Ensure that loads are placed evenly on the rack
system
13
The cart drivers should be trained to place the
pallets correctly on the frames so that there is
no disorder and appropriately unitized
14
When loading onto wire deck, make sure the pallet
is also supported by the beams.
15
Consult a qualified engineer before making any
alterations to your rack system
16
Each rack system is designed for a very specific
application and even a slight change in beam
levels can cause a system to become unsafe.
17
Any alterations to the rack system must be
reviewed and approved by a qualified rack
engineer to ensure safety.
18
Repair damage immediately
19
Dont assume that because the rack has not
failed yet, the damage to the system is not
important.
20
Rack failures can be sudden and catastrophic,
employee life and safety must be front and center.
21
Not to Ignore
22
Make sure that everyone in the warehouse is
aware of the importance of safety and is properly
trained on how to move materials in and out of
the rack system.
23
A regularly inspected and maintained rack system
will provide many years of safe use.
24
http//racksourceinc.com/
Thank You